Novell GroupWise. www.novell.com 6.5 INSTALLATION GUIDE February 6, 2006 Novell. Legal Notices Novell, Inc. makes no representations or warranties with respect to the contents or use of this documentation, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to revise this publication and to make changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes. Further, Novell, Inc. makes no representations or warranties with respect to any software, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to make changes to any and all parts of Novell software, at any time, without any obligation to notify any person or entity of such changes. Any products or technical information provided under this Agreement may be subject to U.S. export controls and the trade laws of other countries. You agree to comply with all export control regulations and to obtain any required licenses or classification to export, re-export, or import deliverables. You agree not to export or re-export to entities on the current U.S. export exclusion lists or to any embargoed or terrorist countries as specified in the U.S. export laws. You agree to not use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses. Please refer to www.novell.com/info/exports/ for more information on exporting Novell software. Novell assumes no responsibility for your failure to obtain any necessary export approvals. Copyright © 1993-2005 Novell, Inc. All rights reserved. No part of this publication may be reproduced, photocopied, stored on a retrieval system, or transmitted without the express written consent of the publisher. Novell, Inc. has intellectual property rights relating to technology embodied in the product that is described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S. patents listed at http://www.novell.com/company/legal/patents/ and one or more additional patents or pending patent applications in the U.S. and in other countries. Novell, Inc. 404 Wyman Street, Suite 500 Waltham, MA 02451 U.S.A. www.novell.com GroupWise 6.5 Installation Guide February 6, 2006 Online Documentation: To access the online documentation for this and other Novell products, and to get updates, see www.novell.com/documentation. Novell Trademarks ConsoleOne is a registered trademark of Novell, Inc. in the United States and other countries. DirXML is a registered trademark of Novell, Inc. in the United States and other countries. eDirectory is a trademark of Novell, Inc. GroupWise is a registered trademark of Novell, Inc., in the United States and other countries. iChain is a registered trademark of Novell, Inc. in the United States and other countries. Manage Wise is a registered trademark of Novell, Inc., in the United States and other countries. NDS is a registered trademark of Novell, Inc., in the United States and other countries. NetWare is a registered trademark of Novell, Inc., in the United States and other countries. NLM is a trademark of Novell, Inc. Novell is a registered trademark of Novell, Inc., in the United States and other countries. Novell Client is a trademark of Novell, Inc. Novell Cluster Services is a trademark of Novell, Inc. Novell Directory Services is a trademark of Novell, Inc. QuickFinder is a trademark of Novell, Inc. Red Carpet is a trademark of Novell, Inc. SUSE is a registered trademark of Novell, Inc. in the United States and other countries. Ximian is a registered trademark of Novell, Inc. in the United States and other countries. ZENworks is a registered trademark of Novell, Inc. in the United States and other countries. Third-Party Materials All third-party trademarks are the property of their respective owners. Contents About This Guide Part I Installation 4 What Is GroupWise? What GroupWise Provides What You Need to Do Essential Communication and Collaboration Services Available Anytime:. ooo co done vaide ra ep a ee E a A ARE Bee ek Accessible Anywhere Always Secure GroupWise System Requirements GroupWise Administration Requirements GroupWise Client Requirements 3 Installing a Basic GroupWise System Basic System Overview... li e ayh ee O eee pe ee Planning Your Basic GroupWise System. ........... a Determining Installation Locations Planning Your Domain Planning Your Post Office. . ©. aa os acna acera ee Planning Your GroupWise Agents Sample GroupWise Configurations Setting Up a Basic GroupWise Systemi. o- sos daa a Setting Up a Basic GroupWise System on NetWare or Windows Setting Up a Basic GroupWise System on Linux Whats Next ie got ah ie thes atc tha a Pe ce aval ee e ae ate ata Internet Agent System Requirements Planning the GroupWise Internet Agent Installing the GroupWise Internet Agent GroupWise Internet Agent Overview SMTP/MIME Service POPI- SENICE rr tomar the kb eee Cae are eam! ier ty SE SRE Phe hg, eten IMAP4 Service LDAP Services Secure Connections via SSL Access Control Multiple Threading SNMP-Compliant SMP Support (NetWare Version) Network Server Requirements GroupWise System Requirements Internet Connectivity Requirements. ........... a Contents 11 5 Selecting the Internet Agent Platform ............. a 78 Selecting the Internet Agent Installation Directory. 0 78 Gathering Domain and Gateway Information . ................ a 79 Selecting the Gateway Object Name ............. oa cara u ca aa a a a a 79 Specifying the Internet Mail Domain Name for Your GroupWise System . LL. 79 Handling Outbolnd:Mall c+ 05 ui s eona a vaha oe E ee ae ee ee e 79 Clustering the NetWare Internet Agent ................ 80 Configuring the Windows Internet Agent. .................. 80 Enabling the Internet Agent Web Console... 2... n na 81 Gathering LDAP Information (Linux Only). ............. m a 82 Setting Up the Internet Agent . Lee 82 Installing the Internet Agenti... Re e E E RR e i A i 82 Assigning:a Postmaster: 2 40 2% ie EG A e A a A 85 Starting'the Internet Agent... ovio E Aaa E e a ee e ee ot eb 86 Testing:the:Internet:Agent:.: iu or O a 90 Whats Next. "sii da ee oe vele Ge Se rid nod is TR Ra 90 GroupWise Internet Agent Installation Worksheet. . . . oaoa aaa 91 Installing GroupWise WebAccess 93 GroupWise WebAccess Overview. ......... 93 GroupWise WebAccess Introduction LL 93 GroupWise WebAccess Components... 2... 0. a a a a 94 One WebAccess Server vs. TWO... 94 WebAccess Security Requirements. ............ a 95 Novell:Cluster Services: v se cr E E RE eee ela 96 WebAccess System Requirements . ......... 0... ee 96 Planning GroupWise WebAccess. . , + 1: seotule i A ra AA ee 98 Deciding Where to Install the GroupWise WebAccess Components... 98 Determining the WebAccess Agent's Configuration... 99 Determining the WebAccess and WebPublisher Applications’ Configuration.................... 103 Setting Up GroupWise WebAccessS............ ee 105 Setting Up GroupWise WebAccess on NetWare or Windows. .... 2... .. e... e. eo... 105 Setting Up GroupWise WebAccess on LINUX .............. a 111 Testing GroupWise WebAccess and WebPubliSher. 0. 118 Whats: Next. ata ir kopa täi vastet aaa a EE Bale ay eG ee tea a a A a 120 GroupWise WebAccess Installation Worksheet. . . 2... mme n 121 WebAccess Agent and WebAccess/WebPublisher Applications .........................: 121 WebAccess Agent... ds e bee aA a wd a ee ee a A ree ee ae 121 WebAccess/WebPublisher Applications. . 2... mnn nen 124 Installing GroupWise Monitor 127 GroupWise Monitor Overview. ........ ora cca crecca reide aa e icre cadu Ea 127 One Monitor Server vs. TWO... ee cao cacos tarada tana Ea ramea da daana 127 Monitor Security Requirements . LL. 128 Monitor: System Requirements’ ia ceed e A E ke ln ine a 129 Planning GroupWise Monitor ............ 131 Deciding Where to Install the GroupWise Monitor Components... 131 Determining the Monitor Agent’s Configuration LL 132 Determining the Monitor Application’s Configuration .. 2... a 133 Setting Up GroupWise Monitor... 2... 0. mm eea naene 135 Setting Up GroupWise Monitor on LINUX. . ........... a 135 Setting Up GroupWise Monitor on Windows. ............... mee mene a 140 Completing Optional Post-Installation Tasks .. . oaoa oaa aa a 140 Using GroupWise Monitor. .......... sace motos te dea e e a ai a aa i e A e a a a a 142 Monitor Agent Console on a Windows Server. .......... 142 Monitor Web Console in Your Web Browser. . LL. 143 GroupWise 6.5 Installation Guide Monitor Web Console on Your Palm OSDevice................0.0. GroupWise Monitor Installation Worksheet. ........................ Installing GroupWise Agents GroupWise Agent Overview .. 2... 2. a Agent System Requirements... .......-.. 00000 ee ee Planning the GroupWise Agents . LL Selecting the Agent Platform . . 2... a ea Selecting the Agent Location... ...... 0... 0000000 eee ee Selecting the Agent Installation Directory... Gathering Domain and Post Office Information. .................00. Clustering the NetWare Agents... Configuring the Windows Agents... aoaaa aa m na Deciding Which Languages to Install... Setting Up the GroupWise Agents... Configuring New Agent Objects in eDirectory. 0. Setting Up the GroupWise Agents on NetWare. .................... Setting Up the GroupWise Agents on Linux ...................... Setting Up the GroupWise Agents on Windows LL Whatis*Next iot antava gi e ore Se 8 koh a ak RO A Re Bete d Installing the GroupWise Windows and Cross-Platform Clients GroupWise Client Overview... GroupWise Client Workstation Requirements... GroupWise Windows Client... aoa aaa rummu... GroupWise Cross-Platform Client... 2... 2. 0... o... . .. . . a Planning Your GroupWise Client Installaton........................ Assigning GroupWise Accounts to Users... ........... 00002008 .. System-Wide Rollouts LL Setting Up the GroupWise Client. ................ 202200000000] Setting Up the GroupWise Windows Client....................... Setting Up the GroupWise Cross-Platform Client... What's Next... 244 4.64 o eed E a pale Be ad Installing GroupWise Messenger Part Il Update 10 What's New in GroupWise 6.5 for Linux 11 What's New in GroupWise 6.5 GroupWise Administration ...............0. 0 a User Move Status Utility (v6.5) . . ........... 2.0.00. 2. 000000000045 Recover Deleted Account ütility(v6.5)......................... Internet Addressing Changes (v6.5) LL... GroupWise View Enhancements (v6.5)... 0... . .. . . . . . .. System Preferences Enhancements (V6.5) LL. Client Options Updates (v6.5)... 2... o... ... . . reena Trusted Applications (V6.5) . ......... o... a User Description Display (v6.5). .......... o... 0000 eee na GroupWise / eDirectory Associations (v6.5) . . 2... 0. ........ a Multiple Account Deletion (v6.5) ........... o... . 0000002 eee eee Mailbox Auditing Information Display (v6.5)... 2... o... . o... . .... Link Configuration Tool Enhancement (V6.5) LL Message Retention Service for Trusted Applications (v6.5 SP1)............ DirXML Driver Warnings (v6.5 SP1) LL... Contents 7 GroupWise Agents: sa «1 + i sog m ee eee ee ee a be be ee ba gas 188 IMAP Support in the POA (V6.5)... 0 a 188 Secure Connections via SSL between the POA and Clients(v6.5).................. e... 189 LDAP: Server: Pooling(V6:5) it hee As a e Ben Cee ae ed a ee ae ac ed 189 More Specific QuickFinder Intervals (V6.5) 2... 0 a 189 CAP Support inthe POA (VOS SPI]: ii el rl Re eR Ae ee E a ee ee ve 189 GroupWise: Client reo Pe Bok ws Gi A ha en a 189 Contacts Folder (VOD): iti es kas a LARE Pa et E ee REA AR al s eee 190 Checklist:Folder (VOD): su tpi a u aon ee ee Ea LA E e BAE ee eg alb a ee ia 190 Sent Items: Folder (VOS) i ta e bok Bod eR ALS ee eR A Rae Shoe We Be Bat ek AO ek Bae as 191 Junk Mail Handling (v6.5) ............ a 191 Tabbed: Item: Views (V6:9) = si es her ade Ged Ao RA as Bee ee ee ee a a ed 191 Categories (V65) ep e aan oy) Dace a eee ee a A a Ge Alal ee a RAG GRA Day a 191 My: Subject: (V6:5) se, one bes bk Bon eG alee, Bb rae AS hk Rg ee oe ia 192 Filter Enhancements:(V6:5)" un hoe Seo ea ee ee ee ae Pee ee A o G 192 Calendar Enhancements (v6.5)... u si a 192 New Headers: (V6:5): 2.5 a ioe mosis a eo ek ee ee a ee a ee LA 192 New:lcons:(V6:5:/V.6:5:SP1) ices beck ai Rok Se eR ee a be A e 192 Pending Sent Items (V05) li ee E ee ee a ee Ee 192 Attachment Enhancement (v6.5 / v6.5 SP1). ................ . . ee 192 Mode Drop-Down List (V6.5); > p's eee eoe ea Ar A EE ea ta ee 193 From Drop-Down List in a Compose View (V6.5)... 1. amm mnn a 193 Read Views (VO: 5) e Gob ml aree ee le EE ko ES Ee ee eS 193 Toolbar Enhancements (VOD). + iesi Ra te ae ae dere an Ee A Ea ee eae 193 Address:Selector:(V6.5) 1 virare oe ee naat ea PORE Ga eee A Abo AA pui 193 Address Book Enhancements (V6.5). ............. a 193 S/MIME Secure Message Enhancements (v6.5) 0. 193 HTML Enhancement (v6.5 SP1). Le 194 POP3 and IMAP4 Account Passwords (v6.5 SP1) 0... 194 GroupWise Internet Agent... cl i a EE Ro ee oe ot a oS 194 Secure Connections via SSL (v6.5) ............ sera aa neranda raaraa 194 Forced SSL Option for POP and IMAP Clients (V6.5) 0.0. 194 SMTP Host Authentication (v6.5) 2... a 195 Rerouting Relay Host Messages (V6.5)... . aa aa a 195 Default Number of SMTP Send and Receive Threads (V6.5)... aa a 195 Real-Time: Blacklists:(V6.5) i. pira a A lo EE ae Bae Ee Ae E eee aaa ay a 195 Deferred Message Retry (v6.5)... ss ili LR E 196 Enhanced: Verbose:Logging. (V6.5)... cs. mt eee vaeb ee ee ee ee E A 196 Blocked txt: File (VOD) "42 corde ae eRe eh eee ee Ee kok A ee fe ee ee Se et 196 Internet Agent Restart (V6:5) ceci ce 1801 ee Ee AS eee Oe A a ee eo ae a ea 197 GroupWise WebACCESS iio pa 5 ea A a a D AAE kk ee be a TRA 197 Apache Web Server for NetWare Support (v6.5 / v6.5 SP1) LL. 197 Tomcat Servlet Engine Support (v6.5 / v6.5 SP1). LL 197 Easier Création:of PQA Files (V6.5) (i ili nõmme e e mt E E RE po ee e A 198 Secure Connections via SSL (V6.5)... name a 198 Trusted Server (Single Sign-On) Support (v6.5). 20 198 Session Cookie Support (v6.5) > ia aasa mmm 198 Proxy Server Data Caching (V6.5). . e seoses sos toa arcana ERRE E E e a E 198 Document Viewing and Opening Options (V6.5). LL 199 Size Limitations for Document Viewing (v6.5 SP1) LL. 199 Web Browser Data Caching (v6.5 SP1) 0... 200 New WebAccess Client Features (v6.5 / v6.5 SP1) LL... 200 GroupWise Monitor vostro ak ee G E ee ee AA etek bee an A eR Ae p 202 Apache Web Server for NetWare Support (v6.5 / v6.5 SP1) .. 2... 0.0.00. ee 202 Tomcat Servlet Engine Support (v6.5 / v6.5 SP1). LL 202 GroupWise 6.5 Installation Guide 12 13 14 15 16 17 Easier Creation of PQA Files (v6.5)... 2... 2. em ea Agent Groups.(V6:5). 2. soe fe RI Boe A läb A he E e oe Fon ed Re An Enhanced Monitor Agent Menus (V6.5)... 2... ea Suspend/Resume Polling Capability (v6.5). . ........... 0.2.0... 0200000008. Custom: States: (V6:5) is i p p ak eb a ev a E ee on ela ee Gop A Understanding the Update Process Understanding eDirectory Schema Extensions. ........ 0... a .. .. e Understanding GroupWise Software Updates . ........ 0... .... .. a Software Distribution Directory . LL. Console ONE: nino po ds RIA A A A pre a È Administration Agent... Understanding Domain and Post Office DatabaseUpdates.................. Understanding GroupWise Client Updates. . 0... Understanding Internet Agent Updates. . LL... Understanding WebAccess Updates... WebAccess:Agent unica 1475 iene e e a e WebAccess Components on the Web Server. . LL... Understanding Monitor Updates ... 2... 20... a Understanding GroupWise Gateway Compatibiity.....................0.. Preparing Your GroupWise System Updating Your GroupWise 6.x System to Version 6.5 Installing the GroupWise 6.5 Software... 2... e na Updating the Primary Domain . .. aoaaa Updating PostiOffices s 2 i lai lena A PEA IS A E Installing and Starting the POA . LL Copying the GroupWise Views to the Post Office Directory ................ Updating Users’ GroupWise Clients . . .. . oaoa a Users’ Software Distribution Directory Already Updated . ................. Users’ Software Distribution Directory Requires Updating. ................ Updating Secondary Domains . ........... 0000 pe Updating the GroupWise Internet Agent LL... Updating GroupWise WebAccess . . . oaoa oaa a Updating GroupWise Monitor... a aaa a Updating Your GroupWise 5.x System to Version 6.5 Updating an Evaluation GroupWise System to a Fully Licensed System Moving Your Existing GroupWise System to Linux Moving Windows Users to Linux or Macintosh. LL... Moving a Post Office toLinux .... 2... 2... a Handling Remote Document Storage Areas ............. a Moving a Domain t0 LINUX. LL Handling Gateways::.. 2 443 da gite as la wale the gp alee eas Part III Appendixes A GroupWise Version Compatibility GroupWisé'6:5°for Linx -noi etei e a e LEA pid Compatibility with GroupWise 6.5... Compatibility with GroupWise 6.0... GroupWise 6.5" ocmi cu a il ee A AE eel ee ee i Compatibility with GroupWise 6... . 2... 20... 00 00 ee ee Compatibility with GroupWise 5.x... 2. 0... e... . . . eo... GroupWise G ot Ek e ae Reed Mae We EAA E i EO Er PEE aes we a 240 E JA aan fee I ae a 244 Contents 9 10 Third-Party Materials 247 Apache Server:2./Tomoat4:1, 0 passe et Ee LA ka A eta ee Se A Seh La 247 Openssl 0k a ara Ce bee OSS ee bh ba wee Se A E ae Pa eae pa dad 248 OpenLDAP +e EE LAA Se aed ir E Moke ea A me See ea a 250 NET-SNMP Open Source Package. ........... a 250 ---- Part 1: CMU/UCD copyright notice: (BSD like) ----- 5... e m mn ne na 251 ---- Part 2: Networks Associates Technology, Inc copyright notice (BSD) ----- ................... 251 ---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) ----- LL 252 ---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) -----. . 2. a 252 OOMA:2:0' r e E a SS te eee Balt a bes Oe Call ala bt eb hehe Baa E oe 253 Python 2:2: s hk Sager eh a Se AAA LA A bo A al a pi ed ee Racal be 254 Oetopi 4 ide As Se dee Anda ts si t A a Se eee om A Bee kde ua a 254 IRE iced uid bat fob eb ed e led be ee be Be ba kh Dol RP a 255 Documentation Updates 257 February 6, 2006 (GroupWise 6.5 SP6). .. 2... n a 257 Octobers A 2005 % fiom seme di pe paia eg hs te ba ee 258 September 19, 2005 (GroupWise 6.5SP5). 0... reena mnn ena 258 February 28, 2005 (GroupWise 6.5 SP4) . 2... a 259 November 30, 2004 (GroupWise 6.5 SP3) .............. a 259 September:30;:2004%; 342 208. re Se ee i es Ap A e Ln an 260 June 25, 2004 (GroupWise 6.5 SP2 and GroupWise 6.5forlinuxSP2)........................ 260 May 3, 2004 (GroupWise 6.5 for Linux)... 2. mumm mme 260 October'31; 2003. r fiala Honk a Be e eA ee a E A ee ee ee ee ee a 262 JULY 1622003 (SPA) nario ae Se ee hae eet ee eA M ee oled ee a opel ii Se 263 GroupWise 6.5 Installation Guide About This Guide This Novell® GroupWise® 6.5 Installation Guide helps you install a new GroupWise system or update an existing Group Wise 5.x/6 system. The guide is intended for network administrators who install and administer GroupWise and is divided into the following sections: + “Installation” on page 13 * “Update” on page 177 * “Appendixes” on page 237 Additional Documentation For additional GroupWise documentation, see the following guides at the Novell GroupWise 6.5 documentation Web site (http://www.novell.com/documentation/gw65): * Administration Guide * Multi-System Administration Guide * Interoperability Guide * Troubleshooting Guides * GroupWise Client User Guides Documentation Updates For the most recent version of the GroupWise 6.5 Installation Guide, visit the Novell GroupWise 6.5 Web site (http://www.novell.com/documentation/gw65). Documentation Conventions In Novell documentation, a greater-than symbol (>) is used to separate actions within a step and items in a cross-reference path. A trademark symbol a TM, etc.) denotes a Novell trademark. An asterisk (*) denotes a third-party trademark. When a single pathname can be written with a backslash for some platforms or a forward slash for other platforms, the pathname is presented with a backslash. Users of platforms that require a forward slash, such as Linux*, should use forward slashes as required by your software. When a startup switch can be written with a forward slash for some platforms or a double hyphen for other platforms, the startup switch is presented with a forward slash. Users of platforms that require a double hyphen, such as Linux, should use double hyphens as required by your software. About This Guide 11 User Comments We want to hear your comments and suggestions about this manual and the other documentation included with this product. Please use the User Comment feature at the bottom of each page of the online documentation, or go to www.novell.com/documentation/feedback.html and enter your comments there. 12 GroupWise 6.5 Installation Guide Installation Chapter 1, “What Is Group Wise?,” on page 15 Chapter 2, “GroupWise System Requirements,” on page 19 Chapter 3, “Installing a Basic Group Wise System,” on page 23 Chapter 4, “Installing the GroupWise Internet Agent,” on page 77 Chapter 5, “Installing GroupWise WebAccess,” on page 99 Chapter 6, “Installing GroupWise Monitor,” on page 135 Chapter 7, “Installing GroupWise Agents,” on page 155 Chapter 8, “Installing the GroupWise Windows and Cross-Platform Clients,” on page 177 Chapter 9, “Installing GroupWise Messenger,” on page 183 Installation 13 14 GroupWise 6.5 Installation Guide What Is GroupWise? Novell® GroupWise® is an enterprise collaboration system that provides secure e-mail, calendaring, scheduling, and instant messaging. GroupWise also includes task management, contact management, document management, and other productivity tools. GroupWise can be used on your desktop on Linux*, Windows*, or Macintosh*; in a Web browser anywhere you have an Internet connection; and even on wireless devices. Your GroupWise system can be set up on NetWare®, Linux, Windows, or any combination of these operating systems. The following sections include more details about what GroupWise provides and what you need to do to set up GroupWise to best meet your needs. + “What GroupWise Provides” on page 15 + “What You Need to Do” on page 17 What GroupWise Provides Group Wise provides communication and collaboration services that are secure, highly available, and easily accessible, as explained in the following sections: + + + + “Essential Communication and Collaboration Services” on page 15 “Available Anytime” on page 16 “Accessible Anywhere” on page 16 “Always Secure” on page 16 Essential Communication and Collaboration Services GroupWise provides a variety of tools to enable users to work together and work smarter. + Messaging: Send and receive mail messages, phone messages, and reminder notes. A mail message is for general correspondence. A phone message is designed for those who take phone messages for others. A reminder note includes a start date and, when accepted by the recipient, is posted to the recipient’s Calendar. Instant Messaging: Communicate in real time with other GroupWise users through GroupWise Messenger. Group Wise Messenger lets you know when other users are online, busy, or away from their desks. It also allows you to save conversations. Scheduling: Schedule both appointments and tasks. When you schedule an appointment, you can search other users’ Calendars to find free times for the appointment. When you schedule a task, you can assign a priority and due date to the task. If the recipient accepts an appointment or task, it is automatically added to his or her Calendar. Calendaring: View and manage your appointments, tasks, and reminder notes in a Calendar view. What Is GroupWise? 15 + Available Anytime Task Management: Accept or decline the tasks you are sent, and track accepted tasks through to completion. You can also turn any message into a task by adding it to your Checklist folder. Contact Management: Manage information for your contacts, groups, resources, and organizations, including being able to view, update, delete, and add information to the contacts in your address book. In addition, you can view a history of messages sent to and received from individual contacts. Document Management: Store documents in Group Wise libraries. In a library, documents are compressed to save disk space and encrypted to maintain security. With document management, you can check in, check out, share, and version documents. Group Wise ensures that your essential communication tools are always available: + Caching: The GroupWise Windows and Cross-Platform clients include a Caching mode that allows you to cache GroupWise information to your local drive and continue to work even when you aren't logged into your network mailbox. LDAP Pooling: If you are using LDAP authentication for GroupWise mailbox authentication, LDAP pooling ensures that there is always an LDAP server through which authentication can be performed. Clustering: To ensure that GroupWise data is always available and GroupWise components are always running, you can install Group Wise into a Novell Cluster Services™ environment or a Microsoft* Clustering Services environment. Accessible Anywhere Group Wise lets you communicate and collaborate with other people using the device that is most convenient: + + Always Secure Personal Computers: To access your mailbox, you can run the Group Wise Windows client on any workstation that uses Windows 98 or higher. On Linux and Macintosh workstations, you can run the Group Wise Cross-Platform client. Web Browsers and Wireless Devices: With Group Wise WebAccess installed, you can also access your mailbox through a Web browser, a cellular phone, or wireless PDAs (personal digital assistants) such as PalmPilot* and Pocket PC*. The Group Wise WebAccess client formats information to best accommodate the type of device on which it is being displayed. Other E-Mail Clients: GroupWise enables you to access your mailbox with any POP3 and IMAP4 e-mail clients. GroupWise provides extensive security measures to protect your information. + + Encryption: To protect your information as it is stored in the various Group Wise databases and moved across the network, GroupWise encrypts the information. Each piece of information is encrypted differently through the use of randomly-generated encryption keys. Open Security Standards: To further ensure that your information is secure while moving across your internal network or across the Internet, GroupWise supports open security standards such as Secure Socket Layer (SSL), Secure Multipurpose Internet Mail Extension (S/MIME), Public Key Infrastructure (PKI), and Transport Layer Security (TSL). 16 GroupWise 6.5 Installation Guide + Spam Protection: To protect you from seeing unwanted messages, the GroupWise Windows client includes a Junk Mail Handling feature that lets you control unwanted Internet e-mail messages. In addition, you can configure the Internet Agent (the GroupWise component responsible for sending and receiving Internet e-mail messages) to reject messages from known open relay hosts and spam hosts. GroupWise also works with partner products that provide additional anti-spam solutions. ¢ Virus Protection: GroupWise works with partner products to provide solutions that detect and eliminate viruses. For information about additional security solutions available for Group Wise through GroupWise partners, see the GroupWise Partners Web site (http://www.novell.com/products/groupwise/ partners). What You Need to Do GroupWise includes multiple components that you need to install to realize the full benefits of GroupWise. However, some components might not be necessary depending on your needs. The following table outlines the components, what they provide, and where to find instructions for installing them. Component Administration, Agents, and Client (Windows or Cross-Platform) Internet Agent WebAccess Monitor Messenger What it does Necessary for a basic GroupWise system. These components are required and must be installed before any other components. Provides Internet e-mail communication, POP3/IMAP4 client access, and paging services. Provides access to mailboxes through a Web browser or wireless device. Provides administrative monitoring of the GroupWise agents. Provides instant messaging. Go to Chapter 3, “Installing a Basic GroupWise System,” on page 23 Chapter 4, “Installing the GroupWise Internet Agent,” on page 77 Chapter 5, “Installing GroupWise WebAccess,” on page 99 Chapter 6, “Installing GroupWise Monitor,” on page 135 Novell GroupWise Messenger Installation Guide (NovellMessengerlnstallationGuide.paf) in the \server\docs\en directory on the Novell GroupWise Messenger CD In addition to the sections referenced in the above table, this Installation Guide includes the following two sections: * Chapter 7, “Installing GroupWise Agents,” on page 155 * Chapter 8, “Installing the GroupWise Windows and Cross-Platform Clients,” on page 177 The information in these sections is provided as a reference for installing additional GroupWise agents and GroupWise clients after you’ve created your basic GroupWise system. What Is GroupWise? 17 18 GroupWise 6.5 Installation Guide GroupWise System Requirements You, as a GroupWise administrator, must ensure that your system meets GroupWise system requirements, so that your GroupWise system can be set up successfully. After your GroupWise system is set up, you must ensure that users’ workstations meet GroupWise client requirements, so that users can run the GroupWise clients successfully. * “GroupWise Administration Requirements” on page 19 * “GroupWise Client Requirements” on page 20 GroupWise Administration Requirements O 32-bit/x86 processor A Any of the following server operating systems for the GroupWise agents (Post Office Agent, Message Transfer Agent, Internet Agent, WebAccess Agent, Monitor Agent): + NetWare® 4.2, NetWare 5.1, or NetWare 6.x, plus the latest Support Pack for your version of NetWare NOTE: Domains and post offices can be located on NetWare 3.12 servers, although the agents cannot run there. The Monitor Agent is not available for NetWare. + SUSE? Linux Standard Server 8, SUSE Linux Enterprise Server 8, SUSE Linux Enterprise Server 9, Red Hat* Enterprise Linux 3 ES, or Red Hat Enterprise Linux AS The X Window System is required by the GUI Installation Advisor and Setup Advisor that step you through the process of creating a new GroupWise system. A text-based Installation Advisor is also available. The X Window System and OpenMotif* are required by the GUI GroupWise agent consoles. The agents can also run as daemons without user interfaces. * Windows NT* Server, Windows 2000 Server, or Windows 2003 Server, plus the latest Service Pack for your version of Windows O NDS® or eDirectory™ (any version on any platform; however, if you want to use LDAP with Group Wise, eDirectory 8.5 or later is required.) Group Wise 6.5 for Linux includes eDirectory 8.7.3 for Solaris*, Linux, and AIX*. However, eDirectory 8.7.3 is not supported on Red Hat Enterprise Linux 3 ES or AS. An eDirectory update supporting Red Hat Enterprise Linux 3 ES or AS will be available soon. O ConsoleOne® + Version 1.3.6 or later for Linux ConsoleOne on Linux requires Java Virtual Machine (JVM*) 1.4.1 or later, plus the X Window System*, version X11R6 or later + Version 1.3.4 or later for Windows GroupWise System Requirements 19 O Adequate server disk space: ¢ Software distribution directory: 500 MB for all GroupWise components * Domain directory: 10 MB (minimum) * Post office directory: 2 MB per user (minimum); 10 MB or more per user (recommended) + MTA/POA installation: approximately 25 MB (varies by platform) ¢ Internet Agent installation: approximately 37 MB (varies by platform) * WebAccess installation: approximately 215 MB (111 MB shared with Monitor; varies by platform) * Monitor installation: approximately 140 MB (111 MB shared with WebAccess; varies by platform) O Internet connectivity for the Internet Agent ¢ Internet connection over a leased line or a standard telephone line ¢ Internet domain name for your company * DNS server access or relay host access O Any of the following Web servers for WebAccess and Monitor: * NetWare 4.2/5.1 (latest Support Pack required): NetWare Enterprise Web Server * NetWare 6.x: Netscape* Enterprise Web Server; Apache Web Server * NetWare 6.5 (GroupWise 6.5 Support Pack 1 or later required): Apache 2 * Linux: Apache 2 * Windows NT (latest Service Pack required): Microsoft Internet Information Server 4.0; Netscape Enterprise Server* 3.6 or later * Windows 2000: Microsoft Internet Information Server 5 or later * UNIX* Solaris: Apache Web Server 1.3.3 or later O Any of the following Web browsers for the agent Web consoles: * Linux: Mozilla 1.4 or later and comparable Mozilla-based browsers * Windows: Microsoft Internet Explorer 4.0 or later; Netscape Navigator* 4.0 or later * Macintosh: Safari* 1.0 or later, Microsoft Internet Explorer 4.5 or later; Netscape Navigator 4.51 or later * UNIX: Netscape 4.0 or later; Microsoft Internet Explorer 4.0 or later GroupWise Client Requirements O Any of the following desktop operating systems for the GroupWise Windows client + Windows 98 on a Pentium* 133 or higher with at least 48 MB of RAM * Windows NT on a Pentium 133 or higher with at least 64 MB of RAM + Windows 2000 on a Pentium 200 or higher with at least 128 MB of RAM * Windows XP on a Pentium 300 or higher with at least 128 MB of RAM * Plus 60 MB of free disk space on each user’s workstation to install the Windows client O Any of the following desktop operating systems for the Group Wise Cross-Platform client: 20 GroupWise 6.5 Installation Guide * SUSE Linux Desktop, SUSE Linux 8.2, or SUSE Linux 9 Professional, plus the KDE desktop or the GNOME desktop * Red Hat 9 or Red Hat Enterprise 3 WS, plus the GNOME desktop * Macintosh OS 10.3 (Panther) * Plus Java Virtual Machine (JVM) 1.4.2 or later * Plus 40 MB of free disk space on each user’s workstation to install the Cross-Platform client O Any of the following Web browsers for the WebAccess client: * Windows: Microsoft Internet Explorer 4.0 or later; Netscape Navigator 4.0 or later * Linux: Mozilla 1.4 or later and comparable Mozilla-based browsers * Macintosh: Safari 1.0 or later, Microsoft Internet Explorer 4.5 or later; Netscape Navigator 4.51 or later * UNIX: Netscape 4.0 or later; Microsoft Internet Explorer 4.0 or later O Any of the following wireless devices for the WebAccess client: * Any wireless device that supports the Wireless Access Protocol (WAP) and has a microbrowser that uses Handheld Device Markup Language (HDML) 3.0 or above or Wireless Markup Language (WML) 1.1 or above * A Palm OS* device with any Palm OS version that supports Web Clipping Applications (PQAs) * A Windows CE device with any Windows CE version GroupWise System Requirements 21 22 GroupWise 6.5 Installation Guide Installing a Basic GroupWise System Every Novell® Group Wise” system, whether it services five users or 50,000 users, starts as a basic GroupWise system. The following sections present the background information and installation instructions you need to successfully implement your basic Group Wise system. * “Basic System Overview” on page 23 * “Planning Your Basic Group Wise System” on page 24 + “Setting Up a Basic Group Wise System” on page 43 + “What's Next” on page 68 * “Basic GroupWise System Worksheet” on page 70 NOTE: If you plan to install GroupWise in a clustered server environment provided by Novell Cluster Services'M or Microsoft Clustering Services, see the GroupWise 6.5 Interoperability Guide for additional information. Basic System Overview A basic GroupWise system consists of a single domain with one post office, a document library, and one or more users, as shown below. Domain ® | Message Transfer Agent Post Office | Agent Post Office L with Library GroupWise Client Each GroupWise user has a mailbox in the post office; users run the GroupWise client (Windows, Cross-Platform, or WebAccess) to access their mailboxes and to send and receive mail. The GroupWise Post Office Agent (POA) delivers messages between users’ mailboxes in a post office, and the GroupWise Message Transfer A gent (MTA) routes messages between post offices (if there is more than one post office in the domain) and between domains (if there is more than one domain in the system). After you finish setting up your basic GroupWise system, you can review “What°s Next” on page 68 to learn how you can expand your system. Installing a Basic GroupWise System 23 Planning Your Basic GroupWise System Group Wise includes an Installation Advisor to help you install the GroupWise files to the appropriate locations and a Setup Advisor to help you create and configure your GroupWise system. Both Advisors provide information to guide you through the process. If you are comfortable with your knowledge of GroupWise, you can skip this planning section and continue with “Setting Up a Basic GroupWise System” on page 43. Otherwise, you should review the following sections while filling out the “Basic GroupWise System Worksheet” on page 70. The worksheet lists all the information you are prompted for as you run the Advisors. * “Determining Installation Locations” on page 24 * “Planning Your Domain” on page 28 * “Planning Your Post Office” on page 33 * “Planning Your GroupWise Agents” on page 36 To help with the above tasks, you can review “Sample GroupWise Configurations” on page 40. The GroupWise 6.5 Best Practices Guide (http://www.novell.com/coolsolutions/gwmag/features/ a gw65 best practices guide gw.html) can also be of assistance. Determining Installation Locations Novell eDirectory The Installation Advisor prompts you for information about the Novell eDirectory tree where you plan to create GroupWise objects and the network server locations where you plan to create GroupWise directories and install files. The following sections prepare you to supply the required information. * “Novell eDirectory” on page 24 + “ConsoleOne” on page 25 * “GroupWise Software Distribution Directory” on page 26 + “GroupWise Languages” on page 27 GroupWise is administered through eDirectory, the directory service provided by Novell. All components, such as domains, post offices, libraries, and agents, as well as all users’ GroupWise accounts, are configured through objects in eDirectory. You need to make sure that you have eDirectory installed in your environment. eDirectory can be installed on NetWare, Linux, or Windows. Group Wise supports all versions of NDS and eDirectory; however, Novell eDirectory 8.5 and later provide some very specific LDAP-related capabilities for Group Wise that are not available if you are using earlier versions of eDirectory or NDS: ¢ Users can authenticate to GroupWise through an LDAP directory that does not have the LDAP mail attribute (e-mail address) filled in. + When using LDAP authentication, if a user is denied access to GroupWise, a message indicates the nature of the problem: account disabled, grace logins expired, directory services intruder lockout in effect, and so on. * The GroupWise client can retrieve S/MIME public keys from LDAP directories when users receive encrypted messages. 24 GroupWise 6.5 Installation Guide ConsoleOne If you want GroupWise to have these specific LDAP-related capabilities, you must update to eDirectory 8.5 or above. GroupWise 6.5 for Linux includes the Novell eDirectory CD to assist those who do not already have eDirectory installed and want to install it on Linux. Follow the instructions in the Novell eDirectory Installation Guide (http://www.novell.com/documentation/edir873/index.html) to install eDirectory and ConsoleOne before proceeding to install your basic GroupWise system. Extending the eDirectory Tree’s Schema The Installation Advisor must extend the schema of the eDirectory tree where you plan to create your GroupWise system. Because all objects for a single Group Wise domain must reside in the same eDirectory tree, installing a basic system (one domain) requires you to extend one tree only. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 1: eDirectory Tree, specify the eDirectory tree where you plan to create the GroupWise objects. Making Sure Users Exist in eDirectory You must make sure all users who will use GroupWise exist in eDirectory. GroupWise accounts can only be assigned to eDirectory User objects and GroupWise External Entity objects. Group Wise external entities represent non-eDirectory users and are added to eDirectory for the sole purpose of assigning Group Wise accounts to these users. GroupWise external entities require Group Wise licenses but not eDirectory licenses. You can add Group Wise external entities only after you have installed GroupWise. Instructions for adding GroupWise external entities are provided in “Assigning GroupWise Accounts to Users” on page 178. Group Wise administration is performed through ConsoleOne, version 1.3.4 or later. When you install GroupWise, the GroupWise Administrator snap-in files are copied into an existing ConsoleOne installation. The GroupWise Administrator snap-in files extend the functionality of ConsoleOne to let you administer Group Wise. ConsoleOne considerations differ by platform: * NetWare and Windows: For a GroupWise system on NetWare or Windows, you need to decide which ConsoleOne location you want use to administer GroupWise. This can be a ConsoleOne location on a network server, or it can be on a local workstation. If you plan to use ConsoleOne on a local workstation, you need to perform the GroupWise installation from that workstation. For your convenience, ConsoleOne, version 1.3.4, is included on the GroupWise 6.5 Administrator CD. The Installation Advisor lets you install ConsoleOne if necessary. You can also use the Installation Advisor at a later time to install ConsoleOne and the GroupWise Administrator snap-in files to additional locations. NOTE: For a GroupWise system on NetWare, you cannot run ConsoleOne to administer GroupWise at the NetWare server console. The GroupWise Administrator snap-ins to ConsoleOne do not run in that environment. ¢ Linux: For a GroupWise system on Linux, ConsoleOne must already be installed before you set up your GroupWise system. GroupWise 6.5 for Linux includes eDirectory 8.7.3 for Solaris, Linux, and AIX, from which you can install ConsoleOne. ConsoleOne is installed to /ust/ConsoleOne. Make sure that ConsoleOne is installed on the Linux server where you plan to create your basic GroupWise system. Installing a Basic GroupWise System 25 BASIC GROUPWISE SYSTEM WORKSHEET Under Item 3: ConsoleOne Path, specify the path for the ConsoleOne location you want to use to administer GroupWise. GroupWise Software Distribution Directory 26 During installation, you are prompted to create a GroupWise software distribution directory on a network server and then copy selected Group Wise software components to the directory. You should consider the following when deciding where to create the software distribution directory: + “User Access to the Directory” on page 26 * “Disk Space Required for the Software” on page 26 User Access to the Directory User access considerations depend on which GroupWise client users are running: + Windows Client: Users can install the GroupWise Windows client through a TCP/IP or mapped connection to the software distribution directory. If you want users to install via a mapped connection, you should create the software distribution directory on a server where you can provide appropriate user access. When users install the GroupWise Windows client, they can choose to copy it to a local drive or they can run it from the software distribution directory. If you want users to be able to run the Group Wise client from the software distribution directory, they must have a permanent drive mapping to the directory. + Cross-Platform Client: Users can install the GroupWise Cross-Platform client from the Group Wise 6.5 for Linux Cross-Platform Client CD or from the software distribution directory, which requires user access to the file system where the software distribution directory is located. However, Cross-Platform client users cannot run the client from the software distribution directory. They must install it locally. * WebAccess Client: The GroupWise WebAccess client does not require that users install any GroupWise software on their workstations. Disk Space Required for the Software The disk space required for the directory depends on which software components you copy to the directory. The maximum disk space required to store all the Group Wise software components for one language is approximately 500 MB. For a breakdown by component, see “GroupWise System Requirements” on page 19. We recommend that you copy at least the GroupWise client files to the directory. This enables users to install the Group Wise client from the distribution directory. Otherwise, you need to mount the GroupWise 6.5 Client CD or GroupWise 6.5 for Linux Cross-Platform Client CD as a network volume or file system, or distribute the CD to individual users. If you are going to update the Windows client using AutoUpdate over an IP connection, you should also copy the setupip directory from the GroupWise 6.5 Client CD to the distribution directory. If you are going to update the Cross-Platform client using Red Carpet™, see “Client” in the GroupWise 6.5 Administration Guide. GroupWise 6.5 Installation Guide All Group Wise software other than the client is used for administrative purposes only; if disk space is an issue and you don’t mind accessing the GroupWise 6.5 Administrator CD or GroupWise 6.5 for Linux Administrator CD when you need to install one of the software components, you might want to leave the administrative software on the CD. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 4: Software Distribution Directory, specify the path for the software distribution directory. Under Item 5: Software Selection, select the software components you want copied to the software distribution directory. The Installation Advisor lets you create one software distribution directory. After you’ve set up your basic GroupWise system, you can create additional software distribution directories if needed. For example, if not all users can access a single software distribution directory to run the GroupWise Windows client Setup program, you can create an additional software distribution directory on a server they can access. For information about creating additional software distribution directories, see “Software Directory Management” in “System” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). GroupWise Languages The GroupWise 6.5 CDs contain multiple languages, so you need to decide which languages you want to install. Your choice affects the following programs: * GroupWise Administrator snap-ins for ConsoleOne * GroupWise agents * GroupWise client (Windows, Cross-Platform, or WebAccess) For example, if you install English-US and German, you can run GroupWise Administrator and the agents in either language. By default, GroupWise Administrator runs in the language in which you are running ConsoleOne. Your users then have the choice of using either the English-US client or the German client. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 2: Languages to Install, specify the languages you want to install. The GroupWise Administrator languages are copied to the ConsoleOne location. The GroupWise agent and client languages are copied to the software distribution directory. For more information, see “Multilingual GroupWise Systems” in the GroupWise 6.5 Administration Guide. Planning Your Domain The domain functions as the main administration unit for the GroupWise system. When you configure GroupWise information in eDirectory, it is also stored in the GroupWise domain database. From the domain database, the Group Wise agents distribute the information to each post office database. Users then get the information, such as user addresses, from the post office database. Installing a Basic GroupWise System 27 In a multiple-post-office system, the domain also organizes post offices into a logical grouping for addressing and routing purposes, and enables you to scale your GroupWise system to meet your current and future needs. As you create your basic Group Wise system, the Setup Advisor prompts you for information about the domain. The following sections prepare you to supply the required information. + “System and Domain Names” on page 28 * “Domain Directory” on page 29 * “Domain Context” on page 29 * “Domain Language” on page 32 * “Domain Time Zone” on page 32 System and Domain Names 28 The domain requires a unique name. The name is used as the Domain object’s name in eDirectory. It is also used for addressing and routing purposes within GroupWise, and can appear in the GroupWise Address Book. The domain name can reflect a location, company name or branch name, or some other element that makes sense for your organization. For example, you might want the domain name to be the location (such as Provo) while the post office name is one of the company’s departments (such as Research). Name your domain carefully. After it is created, the name cannot be changed. You must also provide a name for your GroupWise system. The system name is used when connecting to other GroupWise systems; for this reason, it must be different than any other Group Wise system with which you might want to connect. The system name can be your company name (for example, Novell), GroupWise, or anything else that fits the naming scheme you want to use. The system name is displayed only in ConsoleOne. You cannot change the name after your system is created. System and domain names can consist of one or more words. Use underscores (_) rather than spaces as separators between words to facilitate addressing across the Internet. Do not use any of the characters listed below in system and domain names: ASCII characters 0-13 Comma, Asterisk * Double quote " At sign @ Extended characters Braces { } Period . Colon : Parentheses ( ) BASIC GROUPWISE SYSTEM WORKSHEET Under Item 6: System Name, specify the system name. Under Item 7: Domain Name, specify the domain name. GroupWise 6.5 Installation Guide Domain Directory The domain requires a directory structure in which to store database files and temporary files that are created during message routing. As you choose a location for the domain directory, consider the following: + Security: GroupWise users never need access to the domain directory, so you should create it in a location that you can easily secure. * Server Platform and Version: The domain directory can be located on the following platforms: + NetWare 3.12, 4.2, 5.x, or 6.x + SUSE® Standard Server 8 or Enterprise Server 8 * Red Hat Enterprise Linux 3 ES or AS * Windows NT Server or Windows 2000 Server * MTA Access: The MTA requires access to the domain directory. Therefore, you might want to consider the server type (NetWare, Linux, or Windows) and location of the MTA before deciding on a domain directory. For information about the MTA, see “Planning Your GroupWise Agents” on page 36. For examples of possible domain directory locations and MTA configurations, see “Sample GroupWise Configurations” on page 40. * Disk Space Requirements: The domain directory requires approximately 10 MB of free disk space. This requirement could increase to around 30 MB as your GroupWise system grows. * Directory Name: You should specify an empty directory for the domain. If you want, the directory can reflect the domain name you chose. Use the following platform-specific conventions: * On NetWare, use a maximum of 8 characters in the directory name. * On Linux, use only lowercase characters in the directory name. Choose the name and path carefully. After the directory is created, it is difficult to rename. If the directory you specify does not exist, it is created during installation. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 8: Domain Directory, specify the full path for the domain directory. Domain Context You can create the Domain object in any context in your eDirectory tree. The only requirement is that it be in the same tree as the other objects associated with the domain (Post Office object, User objects, and so forth). The following sections provide examples of where you might place your Domain object. Because it is helpful to discuss the Domain object’s context in relationship to the Post Office object’s context, the examples also include context information for the Post Office object. + “Objects in the Same Container as Users' Organizational Units” on page 30 * “Objects Mirror eDirectory Organization” on page 30 * “Objects Mirror Network Server Organization” on page 31 + “Objects in a Dedicated Container” on page 31 Installing a Basic GroupWise System 29 30 Objects in the Same Container as Users' Organizational Units In the following example, the Domain object (Provo) and Post Office object (Research) reside in the same container (Provo) as the organizational units (Accounting, Manufacturing, R&D, and Sales) that contain the users. This allows you to associate the domain with a single organization and associate one post office with all users within the organization. =) Provo 28 Accounting 8 Manufacturing ® Provo “8 RED QÀ Research E Sales fe CL Gi rai + Objects Mirror eDirectory Organization The following example is similar to the previous example, except that a separate post office is created for each organizational unit that contains users. The Domain object (Provo) resides in the organization (Provo) and the Post Office objects reside in the same organizational units (Accounting, Manufacturing, R&D, and Sales) as the users. =) Provo =|" Accounting QA Payroll 8 Manufacturing E (a Shipping t E ® Provo “E R&D QÀ Research 8-78 Sales w- AA Marketing E) + As in the previous example, this organizational structure allows you to quickly associate users with their post offices. In addition, if you have thousands of users split between the different organizational units, this method allows you to create multiple post offices with a smaller number ofusers on each post office. Objects Mirror Network Server Organization Because the domain and post office have directory structures on network servers, you could also choose to place the Domain and Post Office objects in the same context as the servers where the directories will reside, as shown in the following example. GroupWise 6.5 Installation Guide =) Provo 28 Accounting 8 Manufacturing 28 RED “8 Sales 28 Servers ® Provo E PRYRED El PRV-R&D_SYS E) PRV-R&D_VOL1 Oe Research E E EE Objects in a Dedicated Container If, rather than mirroring your eDirectory or server organization, you would prefer to keep all your GroupWise objects together, you could create a container, such as GroupWise, and place all GroupWise objects in that container, as shown below. Administratively, this type of organizational structure makes it easier to restrict a GroupWise administrator’s object and property rights to GroupWise objects only. For information about GroupWise administrator rights, see “Group Wise Administrator Rights” in “Security” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). E) Provo 28 Accounting 5-98 Groupwise -A Provo + GQ Research 28 Manufacturing 28 RED “8 Sales BASIC GROUPWISE SYSTEM WORKSHEET Under Item 9: Domain Context, specify the context where you want to create the Domain object. If the context does not already exist in your eDirectory tree, create the context now. Installing a Basic GroupWise System 31 Domain Language Domain Time Zone 32 The GroupWise View in ConsoleOne ConsoleOne includes a GroupWise View, shown below. KR novell ConsoleOne KT File Edit View Tools Help Ell | | [8 users ¥||ID Sort M lai x) GroupWise View | 8 Usero1 E pi NOVELL_TREE 8 User02 =- By Provo & Userda 28 Accounting & User04 28 GroupWise & User0s 28 Manufacturing A Userd6 8 RED 8 Usero7 28 Sales & Useros + [EY Security & Usera EY GroupWise System & Usero & Userti & User12 & Usera [GroupWise System: Novell [Connected to Domain: Provo — [Location: \GWisYStprovo\ The Group Wise View filters out all non-GroupWise objects and shows how Group Wise objects relate to each other. For example, in the left pane, notice the Post Office object (Research) is subordinate to the Domain object (Provo). You can select an object in the left pane and display its associated objects (User, Resource, and so forth) in the right pane. The GroupWise View is particularly useful if your GroupWise objects are placed in different contexts in the eDirectory tree. Rather than searching for Group Wise objects throughout the tree, you can administer the objects from the GroupWise View. Some GroupWise administrative functions can only be done while in the GroupWise View. This includes such tasks as defining users from other GroupWise systems so that they appear in your system's Address Book. The domain language determines how times, dates, and numbers are displayed in the GroupWise clients and affects the sorting order for items in the GroupWise Address Book. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 10: Domain Language, specify the language for the domain. The domain language becomes the default language for the domain’s post offices. For more information, see “Multilingual GroupWise Systems” in the GroupWise 6.5 Administration Guide. When a message is sent from a user in one time zone to a user in another time zone, GroupWise adjusts the message's time so that it is correct for the recipient's time zone. For example, if a user in New York (GMT -05:00, Eastern Time) schedules a user in Los Angeles (GMT -08:00, Pacific Time) for a conference call at 4:00 p.m. Eastern Time, the appointment is scheduled in the Los Angeles user’s calendar at 1:00 p.m. Pacific Time. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 11: Domain Time Zone, specify the time zone for the domain. The domain time zone becomes the default time zone for the domain’s post offices. GroupWise 6.5 Installation Guide Planning Your Post Office The post office contains users’ mailboxes. Like a domain, a post office requires a name, has a directory structure and an eDirectory object, and can be configured to support different languages and time zones. The following sections prepare you to supply the Setup Advisor with the required information. * “Post Office Name” on page 33 * “Post Office Directory” on page 33 * “Post Office Context” on page 34 * “Post Office Language” on page 35 * “Post Office Time Zone” on page 35 * “Post Office Users” on page 35 Post Office Name The post office, like the domain, requires a unique name. The name is used as the Post Office object’s name in eDirectory. It is also used for addressing and routing purposes within Group Wise, and can appear in the GroupWise Address Book. The post office name can reflect any element that makes sense for your organization. For example, you might want the domain name to be the location (such as Provo) while the post office name is one of the company’s departments (such as Research). Name your post office carefully. After it is created, the name cannot be changed. Post office names must be one word. The same characters that are invalid in system and domain names are also invalid in post office names (see “System and Domain Names” on page 28). BASIC GROUPWISE SYSTEM WORKSHEET Under Item 12: Post Office Name, specify the name you've selected. Post Office Directory The post office requires a directory structure in which to store database files and temporary files that are created during message routing. As you choose a location for the post office directory, consider the following: * Security: The GroupWise Windows and Cross-Platform clients access the post office through a client/server (TCP/IP) connection to the GroupWise Post Office Agent (POA). The GroupWise WebAccess client uses an HTTP connection. Therefore, GroupWise users never need access to the post office directory, so you should create the directory in a location that you can easily secure. * Server Platform and Version: The post office directory can be located on the following platforms: + NetWare 3.12, 4.2, 5.x, or 6.x However, the Group Wise agents cannot run on NetWare 3.12. They require NetWare 4.2 or higher. * SUSE Standard Server 8 or Enterprise Server 8 * Red Hat Enterprise Linux 3 ES or AS * Windows NT Server or Windows 2000 Server Installing a Basic GroupWise System 33 * POA Access: The POA requires access to the post office directory. Therefore, you might want to consider the server type (NetWare, Linux, or Windows) and location of the POA before deciding on a post office directory. For information about the POA, see “Planning Your GroupWise Agents” on page 36. For examples of possible post office directory locations and POA configurations, see “Sample GroupWise Configurations” on page 40. * Disk Space Requirements: The post office directory holds users’ messages and attachments, so you should plan a minimum of 2 MB per user. 10 MB or more per user is recommended. Although actual messages are relatively small, message attachments (documents, spreadsheets, graphic files, and so forth) can greatly increase the amount of disk space used. Using ConsoleOne, you can restrict the amount of disk space users are allowed for their mailboxes. When you know the number of users and the amount of disk space allocated to each user, you can more accurately determine the amount of disk space required. You can reduce the amount of disk space required for the post office by forcing users to run the GroupWise Windows and Cross-Platform clients in Caching mode rather than Online mode. In Online mode, messages are stored in the post office. In Caching mode, messages are stored on users’ local drives. In addition to users’ messages and attachments, the post office directory also contains a document library. You should take into account the disk space you want to provide for storing documents. * Directory Names: You should specify an empty directory for the post office. If you want, the directory can reflect the post office name you chose. Use the following platform-specific conventions: * On NetWare, use a maximum of 8 characters in the directory name. * On Linux, use only lowercase characters in the directory name. Choose the name and path carefully. After the directory is created, it is difficult to rename. If the directory you specify does not exist, it is created during installation. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 13: Post Office Directory, specify the full path for the post office directory. Post Office Context 34 Like the Domain object, you can create the Post Office object in any context in your eDirectory tree. The only requirement is that it be in the same tree as the Domain object and other objects associated with the domain (User objects and so forth). For configuration examples, see “Domain Context” on page 29. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 14: Post Office Context, specify the context where you want to create the Post Office object. If the context does not already exist in your eDirectory tree, create the context now. GroupWise 6.5 Installation Guide Post Office Language The post office language determines how times, dates, and numbers are displayed in the Group Wise clients and affects the sorting order for items in the GroupWise Address Book. The post office assumes the same language as its domain unless you specify otherwise. For example, if you set the domain and post office language to English-US, all time, date, and numbers are formatted according to English-US standards, and the Address Book items are sorted according to English-US sort order rules. This is true even if some users on the post office are running non- English GroupWise clients such as German or Japanese. Their client interface and Help files are in German or Japanese, but the time, date, and number formats and sort order are according to English-US standards. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 15: Post Office Language, specify the language for the post office. For more information, see “Multilingual GroupWise Systems” in the GroupWise 6.5 Administration Guide. Post Office Time Zone Post Office Users When a message is sent from a user in one time zone to a user in another time zone, GroupWise adjusts the message’s time so that it is correct for the recipient’s time zone. For example, if a user in New York (GMT -05:00, Eastern Time) schedules a user in Los Angeles (GMT -08:00, Pacific Time) for a conference call at 4:00 p.m. Eastern Time, the appointment is scheduled in the Los Angeles user's calendar at 1:00 p.m. Pacific Time. The post office assumes the same time zone as its domain unless you specify otherwise. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 16: Post Office Time Zone, specify the time zone where the post office is located. You need to assign a GroupWise account to each eDirectory user who should have a mailbox in the post office. You can do this while creating your system, or you can do it afterwards. However, we recommend that you at least add yourself so you can test the system. BASIC GROUPWISE SYSTEM WORKSHEET If desired, specify the context for each user under Item 20: Post Office Users. The Setup Advisor lets you select users from the eDirectory tree to add to the post office. You do not need to list all of the users at this time. If you are adding non-eDirectory users as Group Wise external entities, you must wait to add them to the post office until after you have finished the installation. Instructions for adding Group Wise external entities are provided in “Assigning GroupWise Accounts to Users” on page 178. Installing a Basic GroupWise System 35 Planning Your GroupWise Agents Agent Platform Agent Location The Message Transfer Agent (MTA) and Post Office Agent (POA) route messages through the GroupWise system. The MTA handles all message traffic between the domain and post office, while the POA handles all message traffic within the post office. MTA: GroupWise requires one MTA per domain, which means that you need to install and run one MTA for your basic GroupWise system. In addition to routing user messages between post offices and between domains, the MTA routes administration messages from the domain to the post office. For example, when a user is given a Group Wise account in eDirectory, the user is added to the GroupWise domain database. At the same time, the MTA routes an administration message from the domain to the post office so that the POA can add the user to the post office database. After the user is added to the post office database, the post office’s users can see the newly added user’s information in the Group Wise Address Book POA: GroupWise requires one POA per post office, which means that you need to install and run one POA for your basic GroupWise system. The POA routes messages within the post office, updates the post office database when it receives administration messages from the MTA, and performs other maintenance tasks in the post office. The following sections prepare you to supply the information required when installing the MTA and POA: * “Agent Platform” on page 36 + “Agent Location” on page 36 + “MTA Link to the Post Office” on page 38 * “Windows Application vs. Windows Service (Windows Agents Only)” on page 38 + “Web Console” on page 39 + “Agent Language” on page 39 The MTA and POA are available as NetWare NLM programs, Linux executables, and Windows executables. In general, Group Wise is most efficient if you match the agent platform with the network operating system where the post office and domain are located. For example, if a domain and post office are located on a NetWare server, then you would install the NetWare agents for them. However, this is not required. For configuration examples, see “Sample GroupWise Configurations” on page 40. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 21: Agent Platform, specify the type of agents (NetWare, Linux, or Windows) you want to use. The MTA requires direct access to the domain directory. The POA requires direct access to the post office directory. 36 GroupWise 6.5 Installation Guide In general, we recommend that you install an agent on the same server as its directory. For example, you would install the MTA on the same server as the domain directory and the POA on the same server as the post office directory. This ensures that the agent always has access to its directory. Message Post Office Transfer Agent Agent VA È Q Q Domain Post Office However, if necessary, you can install the agent on a different server from its directory. This requires the agent to have a direct link (mapped drive, UNC path, or file system mount) to its directory in order to function. The following diagram illustrates the direct links: Message Post Office Transfer Agent Agent Mapped Drive Mapped Drive UNC Path UNC Path File System Mount File System Mount Domain Post Office For the purpose of simplifying the setup of your basic system, you are required to install both the MTA and the POA to the same server. If, at a later time, you decide that you want to run one of the agents on a different server, see “Installing GroupWise Agents” on page 155. Consider these platform-specific guidelines: * NetWare: When installing the NetWare agents, we recommend you use the sys:\system directory on the NetWare server. This simplifies the use of startup files and ensures that the agent NLM programs are in the server’s search path. If you use a different directory, you must add that directory to the server’s search path. ¢ Linux: The Linux agents are automatically installed to the bin and lib subdirectories under / opt/novell/groupwise/agents. On Linux, do not move the agent software to a different location. * Windows: The default installation directory is c:\grpwise. However, you can install the agents to any directory you want. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 22: Agent Installation Path, specify the installation path for the agents. Installing a Basic GroupWise System 37 MTA Link to the Post Office To route user and administration messages to the post office, the MTA requires direct access or a direct link to the post office directory, or a TCP/IP connection with the post office’s POA. The following diagram illustrates the alternatives: Message Post Office Message Post Office Transfer Agent Agent Transfer Agent Agent TCP IP Mapped Mapped UNC Mount | Mount Domain Post Office Domain Post Office In general, we recommend that you use a TCP/IP connection between the MTA and the POA. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 17: Post Office Link, select whether the MTA will connect to the post office through a TCP/ IP link to the POA or a direct link to the post office directory. Under Item 18: POA Network Address, specify the IP address or DNS hostname of the POA server. The GroupWise Windows and Cross-Platform clients, which access the POA through TCP/IP, need to know the address. If the MTA will have a TCP/IP connection to the POA, it will also use this address. If you plan to have the MTA use a TCP/IP connection to the POA, under Item 19: MTA Network Address, specify the IP address or DNS hostname of the MTA server. Windows Application vs. Windows Service (Windows Agents Only) 38 You can run the Windows MTA and POA as normal applications or as services. When you run the agents as Windows services, they must run under a specific user account. The user account you use depends on where the domain and post office directories are located: * When the domain and post office directories are located on the same server where you are installing the agents, the agents can run under the local system account. You can also display the agent console when the agent software, directories, and databases are local. * When the domain and post office directories are located on a remote server, you must specify a user with rights to access the domain and post office directories. If the agents need to log in to a Windows server, provide a Windows username and password. If the agents need to log in to a NetWare server, provide an existing eDirectory username and password, or create a new account for the agents, as described in “Creating a NetWare Account for Agent Access (Optional)” on page 163. As with all Windows services, you can start the agents manually or have them start automatically each time the Windows server restarts. GroupWise 6.5 Installation Guide Web Console Agent Language BASIC GROUPWISE SYSTEM WORKSHEET Under Item 24: Windows Agent Installation Options, select Install as Windows Services if you want to run the agents as Windows services. If you want to run the agents as Windows services, under Item 25: Windows Services Information, record the account the agents will run under, and if necessary, the password for the account. Also select whether you want the service to start automatically or manually. The MTA and POA provide server consoles to let you monitor and configure the agents while at the agents’ servers. On NetWare, the MTA and POA consoles are always displayed. On Linux, they are displayed only if you start the agents with the --show switch on the command line. On Windows, they are displayed if you run the agents as applications but are not displayed if you run the agents as services. When the MTA and POA consoles are not available, you can monitor and configure the agents through a Web browser. This feature, referred to as the agent Web console, lets you access the agents’ statistics and diagnostic information from any location where you are connected to the Internet and have access to a Web browser, either at a workstation or on a wireless device. By default, the MTA Web console is enabled on port 7180 and the POA Web console is enabled on port 7181. In your browser, you access the agent Web consoles using the following URLs: http://MTA_network_address:port http://POA_network_address:port where MTA_network_address and POA_network_address are the agents’ IP addresses or host names and port is the agent’s assigned HTTP port number. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 18: POA Network Address, specify the POA’s HTTP port. The default port, 7181, should be used unless there is a port conflict. Under Item 19: MTA Network Address, specify the MTA’s HTTP port. The default port, 7180, should be used unless there is a port conflict. If you have users with various language preferences, you can install the Group Wise agents in multiple languages. The language determines the agents’ interface language only. It does not affect messages processed by the agents. By default, the agents start in the language selected for the domain. If that language has not been installed, the agents start in the language used by the operating system. If that language has not been installed, the agents start in English. BASIC GROUPWISE SYSTEM WORKSHEET Under Item 23: Agent Language, list the languages you want to install for the agents. For more information, see “Multilingual GroupWise Systems” in the GroupWise 6.5 Administration Guide. Installing a Basic GroupWise System 39 Sample GroupWise Configurations Many different configurations are possible for your GroupWise system. The following diagrams illustrate some of the ways a basic GroupWise system (one domain and one post office) can be set up. “NetWare 6.x Server” on page 40 + “Linux Server” on page 40 * “Windows 2000 Server” on page 41 * “NetWare Server and Windows NT Server” on page 41 NetWare 6.x Server The following diagram shows a basic GroupWise system set up on a single NetWare 6.x server. NetWare 6.x c:\novell\consoleone User running the ConsoleOne GroupWise Windows client from the softwar distribution directory. Post Office (Research) i Asoft Software Distribution Directory So Y NetWare MTA NetWare POA Administrator Domain (Provo) j:=nw65\mail: z:=nw65\sys: j:\research j:\software TCP/IP TCP/IP Nene. User running the GroupWise Windows or Cross-Platform client from a local drive. Linux Server The following diagram shows all GroupWise components on a Linux server. Linux lusr/ConsoleOne/bin ConsoleOne /gwsystem/provo Domain (Provo) Post Office (Research) Administrator /gwsystem/research /opt/novell/groupwise/software Software Distribution Directory Linux MTA Linux POA y E Y) User running the GroupWis: Cross-Platform client from a local drive. /opt/novell/groupwise/agents/bin 40 GroupWise 6.5 Installation Guide Windows 2000 Server The following diagram shows all GroupWise components on a Windows 2000 server. Windows 2000 3 c:\novell\consoleone User running the ConsoleOne GroupWise Windows client from the softwar distribution directory. Post Office (Research) = x:\software E Administrator Domain (Provo) E j:=w2k\mail: k:=w2k\c: j:\research j:\software Software Distribution Directory Windows MTA Windows POA k:\grpwise ap TCP/IP TCP/IP == User running the GroupWise Windows or Cross-Platform client from a local drive. NetWare Server and Windows NT Server The following diagram shows the domain, post office, and software distribution directory on a NetWare 5.1 server. The MTA and POA, located on a Windows NT server, use a UNC path to access the domain directory and post office directory on the NetWare 5.1 server. NetWare 5.1 El User running the GroupWise c:\novell\consoleone Gähselsõhs KE ra RE rom the software Administrator ¡Asoftware at o Software Distribution Directory directory. a] 9 j:\research j:=nw51\mail: z:=nw51\sys: Post Office (Research) Domain (Provo) User running the GroupWise Windows or Cross-Platform client from a local drive. TCP/IP cyl Windows MTA / Y Windows POA NT40 \\nW51\mail TCP/IP Installing a Basic GroupWise System 41 The following diagram shows the domain and MTA on a NetWare 6 server. The post office, software distribution directory, and POA are on a Windows NT server. The MTA communicates with the POA through TCP/IP. NetWare 6 c:\novell\consoleone ConsoleOne Domain (Provo) ZAsystem NetWare MTA User running the GroupWise Windows or Cross-Platform client Administrator from a local drive. & j:=nw6Wmail: z:=nwé6\sys: k:=nt40\mail: TCP/IP NT 4.0 SI User running the GroupWise Windows TCP/IP client from the software Windows POA s TCP/IP. distribution directory. Post Office (Research) an scan 7 x: =) 7 Software Distribution Directory NOTE: The above configuration has the MTA on one server and the POA on another. Because the basic GroupWise system setup requires you to install the MTA and POA on the same server, you would have to do additional setup to create a similar configuration. Setting Up a Basic GroupWise System Follow the setup instructions for the platform where you are creating your basic GroupWise system: + “Setting Up a Basic GroupWise System on NetWare or Windows” on page 43 + “Setting Up a Basic GroupWise System on Linux” on page 59 Setting Up a Basic GroupWise System on NetWare or Windows You should have already reviewed “Planning Your Basic GroupWise System” on page 24 and filled out the worksheet. The following sections step you through the GroupWise Installation Advisor and Group Wise Setup Advisor. The Installation Advisor installs the GroupWise software. It then launches the Setup Advisor to create your domain and post office, set up the GroupWise agents, and set up the GroupWise Windows client (if desired) on your local machine. ¢ “Starting the Group Wise Installation Advisor on Windows” on page 44 + “Installing the GroupWise Software” on page 46 * “Providing System Information” on page 47 + “Creating Your Basic GroupWise System” on page 48 + “Installing and Starting the GroupWise Agents on NetWare or Windows” on page 49 + “Setting Up and Running the GroupWise Windows Client on Your Local Machine” on page 58 + “Installing the GroupWise Administrator Snap-Ins to Additional Windows Locations” on page 59 42 GroupWise 6.5 Installation Guide Starting the GroupWise Installation Advisor on Windows To start the GroupWise Installation Advisor: 1 Ata Windows 98/NT/2000 workstation that has the Novell Client™ installed, log in as an Admin equivalent to the eDirectory tree in which you are installing Group Wise. The GroupWise Setup Advisor, which is launched by the Installation Advisor, requires the Novell Client in order to create GroupWise objects in eDirectory. If necessary, you can download the Novell Client from the Novell Product Downloads site (http:// download.novell.com). 2 Run setup.exe at the root of the GroupWise 6.5 Administrator CD to display the GroupWise Installation main page. EJ GroupWise GroupWise. Novell @ View the Readme @ View the Installation Guide @ Create or update a GroupWise system 9 Install Products @ Visit the Novell GroupWise Web Site 3 Click Create or Update a GroupWise System, then click Yes to accept the license agreement and display the Welcome to Group Wise Install page. sox) Welcome to GroupWise Install N ove I IL Install does the following: e Helps you plan your system © Ensures that eDirectory is extended to work with GroupWise e Updates ConsoleOne E Installs GroupWise Administrator files for a J ConsoleOne Sets up the GroupWise software distribution directory * Runs ConsoleOne with the Setup Advisor to help you configure your GroupWise system if necessary 4 Click Next until you reach the Administration Options page. Installing a Basic GroupWise System 43 GroupWise Installation = Í ol xj Administration Options You may create or update a GroupWise system, or N ove Il perform other administrative tasks. IV Create a new system or update an existing system. JV Enter 5 Sche i 2 E Installation Guide | < Back Ext | hema. are distribution directory. 5 Make sure that Create a New System or Update an Existing System is selected, then click Next to display the Select Tree page. “lala Select Tree eDirectory will be extended to work with GroupWise N ove Il on the tree(s] you select. If the tree you want is not li listed, log in as Admin equivalent to the desired tree and click Refresh. You will need to extend the schema for each tree 1 associated with a GroupWise domain in order to take 3 advantage of GroupWise functionality. é Select tree(s}: 1 NOVELL INC Refresh | Installation Guide | < Back Ext | 6 Continue with Installing the Group Wise Software. Installing the GroupWise Software The Installation Advisor extends the eDirectory schema for the selected tree and then installs Group Wise software to the ConsoleOne location and software distribution directory. To extend the schema and install the software: 1 In the Select Tree page, select the tree whose schema you want to extend (worksheet item 1), click Next, then enter the information from your worksheet (item 2 through item 5) until you reach the Ready to Install page. 44 GroupWise 6.5 Installation Guide | GroupWise Installation 2 Click Install, then follow the prompts until you reach the Determine Next Step page. GroupWise Installation 3 Click Creating a New Group Wise System, then click Next to display the Run ConsoleOne page. GroupWise Installation Novell. 4 Continue with Providing System Information. Installing a Basic GroupWise System 45 Providing System Information The Installation Advisor launches ConsoleOne with the GroupWise Setup Advisor active. Use your worksheet to provide the Setup Advisor with the information it needs to create your GroupWise system. 1 On the Run ConsoleOne page, click Run to start ConsoleOne and the GroupWise Setup Advisor. The GroupWise Setup Progress: Collect System Information page is displayed. GroupWise System Setup = xi GroupWise Setup Progress Novell. The first step in creating a GroupWise system is to collect information about the systern you wantto create. E Collect system information * Create system * Install agent software * Setup client software 2 Click Next, then enter the information from your worksheet (item 6 through item 20) until you reach the GroupWise Setup Progress: Create System page. GroupWise System Setup E xl Novell. GroupWise Setup Progress You are now ready to create your GroupYWise system. You will be given a chance to review the information before your system is created. Y Collect system information E Create system * Install agent software * Setup client software < Back 3 Click Next to display a summary of the information you entered. 46 GroupWise 6.5 Installation Guide GroupWise System Setup = x| Novell, | Summary System name: Novell Domain name: Provo Domain context: ProvoNovell Domain directory: NGWivol2\provo Domain time zone: (GMT-02:00) Mid-Atlantic Domain language: English - US Post office name: Research Post office context: ProvoNovell Post office directory: \GWivol2research Post office time zone: (GMT-02:00) Mid-Atlantic Post office language: English - US Ifthe above information is correct, click Next to create your GroupWise system. To correct any information, click Back until you reach the appropriate page. “il Cancel Finish Help | 4 Continue with the Creating Your Basic Group Wise System. Creating Your Basic GroupWise System After you have verified that the information you entered is correct, you are ready for the Setup Advisor to create your system. 1 On the Summary page, click Next. The Setup Advisor creates the GroupWise system using the information you provided, then displays the following page: GroupWise System Setup < x Novell. Please Wait The GroupWise System was successfully installed! Click Next to continue. 2 Click Next to display the GroupWise Setup Progress: Install Agent Software page. Installing a Basic GroupWise System 47 GroupWise System Setup > xj GroupWise Setup Progress Novell. You have successfully created your GroupWise system. You must now install and run the GroupWise agent software. Y Collect system information W Create system E Install agent software * Setup client software 3 Continue with Installing and Starting the GroupWise Agents on NetWare or Windows. Installing and Starting the GroupWise Agents on NetWare or Windows At this point, the Setup Advisor has created eDirectory objects and network server directories for your GroupWise system. You now need to install and start the MTA and POA on your NetWare or Windows server. 1 On the GroupWise Setup Progress: Install Agent Software page, click Next to have the Setup Advisor launch the Agent Installation program and display the Select Platform page. lala Select Platform Select the agent software platform: Novell. @ NetWare € Windows NT/2000 Installation Guide | < Back Exit | 2 If you are installing the NetWare agents (worksheet item 21), continue with Installing and Starting the NetWare Agents. or If you are installing the Windows agents (worksheet item 21), skip to “Installing and Starting the Windows Agents” on page 53. Installing and Starting the NetWare Agents 1 On the Select Platform page, select NetWare as the platform, then click Next to display the Installation Path page. 48 GroupWise 6.5 Installation Guide GroupWise Agent Installation > alal x; Installation Path Enter the path where you want the GroupWise agent Nove Il software installed. Installation path: stem] If the server where you are installing the agent software is already part of an existing cluster, you can optimize the agent installation for use in a clustering environment. T Configure GroupWise agents for clustering Installation Guide | < Back Exit 2 Select the directory where you want to install the agents (worksheet item 22), then click Next to display the Language page. Language Select the agent languages to install: Novell. Installation Guide | < Back Exit 3 Select the languages you want to install (worksheet item 23), then click Next to display the Summary page. Summary Platform: Netware N ove II. Path: i system If the above information is incorrect, click Back until you teach the appropriate page and then enter the correct values. Installation Guide | 4 Click Install to install the agents. Installing a Basic GroupWise System 49 50 The Installation Complete page appears when the files have been installed. GroupWise Agent Installation L- ix] Installation Complete The GroupWise agent software has been successfully N ove l l. installed and configured. T Launch in Protected Mode Installation Guide | 5 Select from the following options: Update AUTOEXEC File: Select this option to reference the grpwise.ncf file from the server’s autoexec.ncf file so that the Group Wise agents are automatically loaded whenever the server is started. Launch GroupWise Agents Now: Select this option to have the Installation Advisor start the GroupWise agents for you immediately. You should only do this if the MTA and POA are on the same server as the domain and post office directories. If you want the agents to run in protected mode, select Launch in Protected Mode. Click Finish to return to the Setup Advisor. The GroupWise Setup Progress: Set Up Client Software page is displayed. GroupWise System Setup E xÍ GroupWise Setup Progress Novell. The final step is to set up the GroupWise client software. Y Collect system information W Create system Y Install agent software E Set up client software < Back 7 Ifyou have already started the Group Wise agents (because they are on the same server as the domain and post office directories), skip to “Setting Up and Running the Group Wise Windows Client on Your Local Machine” on page 58. or Continue with Step 8 below to configure the agents to access the server where their directories have been created. 8 Use a text editor to modify the agents’ startup files. GroupWise 6.5 Installation Guide 9 10 The load command in the grpwise.ncf file includes a startup switch that points the agents to their startup files. The startup files include configuration information the agents need to function properly. When the MTA is not on the same server as the domain directory and post office directory, you need to edit the MTA startup file to include the MTA’s eDirectory distinguished name. When the POA is not on the same server as the post office, you need to edit the POA startup file to include the POA’s eDirectory distinguished name. The startup files are located in the agent installation directory you specified in Step 2. The MITA startup file is named domain.mta, where domain is the first 8 letters of the domain name (for example, provo.mta). The POA startup file is named post_office.poa, where post_office is the first 8 letters of the post office name (for example, research.poa). The /dn-distinguished_object_name startup switch is located in Section 1 of the startup file. Delete the semicolon (;) at the beginning of the line and replace the distinguished_object_name variable with the distinguished name of the MTA or POA. For example, if the MTA is for a domain named Provo that is located in a container named Novell, you would enter: /dn-mta.provo.novell At the server's console, enter grpwise.ncf to start the agents. Now that you have the NetWare agents installed and running, skip to “Setting Up and Running the GroupWise Windows Client on Your Local Machine” on page 58. Installing and Starting the Windows Agents To install the Windows agents, you must run the Agent Installation program at the Windows server where you are installing the agents. 1 If you are already running the Agent Installation program at the Windows server where you are installing the agents, skip to Step 6. or Click Exit to close the Agent Installation program that was launched automatically by the Setup Advisor, go to the Windows server where you want to install the agents, then continue with Step 2 below. Make sure you are logged in as an Admin equivalent and have network access to the software distribution directory (or GroupWise 6.5 Administrator CD), domain directory, and post office directory. Start the Agent Installation program (install.exe in the agents subdirectory), then click Yes to accept the license agreement and display the Overview page. Installing a Basic GroupWise System 51 GroupWise Agent Installation Novell. 4 Click Next to display the Install/Uninstall page GroupWise Agent Installation Novell. GroupWise Agent Installation 6 Click Windows, then click Next to display the Installation Path page. 52 GroupWise 6.5 Installation Guide GroupWise Agent Installation 1) x! Installation Path Enter the path where you want the GroupWise agent N ove I | " software installed. Installation path: Ic: \grpwise| IV Install and configure SNMP for GroupWise agents IV Install GroupWise agent software IV Install as NT services Installation Guide | < Back 7 Enter the path to the directory where you want the agents installed (worksheet item 22), select the installation options you want (worksheet item 24), then click Next to display the Language page. GroupWise Agent Installation - [a] | x| Language Select the agent languages to install: Novell. Installation Guide | < Back Exit 8 Select the languages you want to install (worksheet item 23), then click Next. If you are not running the Agent Installation program on the same server as the GroupWise Setup Advisor, the Domains/Post Offices page is displayed. Continue with Step 9. Ifyou are running the Agent Installation program on the same server as the GroupWise Setup Advisor, the Setup Advisor passes the domain and post office information to the Agent Installation program so you are not prompted for it again. Skip to Step 13. Installing a Basic GroupWise System 53 GroupWise Agent Installation a =104x1 Domains / Post Offices To configure the agent software, Install must know the N ove I I locations of the domains and post offices these agents will service. Click Add to specify a domain or post office location. Click Next wen all domains and post offices have been added. HTTP Port Add... Remove Installation Guide | < Back Exit | The MTA and POA must know the location of the domain and post office directories. 9 To specify the location of your domain, click Add, select Domain, specify the domain name, specify the path to the domain directory, then click OK. The location you specify for the domain directory is stored in the MTA startup file. When you start the MTA, it reads the startup file to find the location of the domain directory. The MTA then reads the domain database (wpdomain.db) in the domain directory for all configuration information it needs to run. The MTA startup file is located in the agent installation directory you specified in Step 7. The startup file is named domain.mta, where domain is the first 8 letters of the domain name (for example, provo.mta). 10 To specify the location of your post office, click Add, select Post Office, specify the post office name, specify the path to the post office directory, then click OK. The location you specify for the post office directory is stored in the POA startup file. When you start the POA, it reads the startup file to find the location of the post office directory. The POA then reads the post office database (wphost.db file) in the post office directory for all configuration information it needs to run. The POA startup file is located in the agent installation directory you specified in Step 7. The startup file is named post_office.poa, where post_office is the first 8 letters of the post office name (for example, research.poa). 11 Click Next. 12 If you are installing the agents as Window services, the Windows Service Information page is displayed. Fill in the service information (worksheet item 25), then click Next to display the Summary page. or If you are not installing the agents as services, the Summary page is displayed. 54 GroupWise 6.5 Installation Guide GroupWise Agent Installation =104x1 Summary Platform: Windows NT N ove I I A Path: c:\grpwise If the above information is incorrect, click Back until you reach the appropriate page and then enter the correct values. p ay Installation Guide | 13 Click Install to install the agents. The Installation Complete page appears when the files have been installed. GroupWise Agent Installation Mm E Installation Complete The GroupWise agent software has been successfully N ove I l. installed and configured. Installation Guide | 14 Select from the following options: Update the AUTOEXEC File: This option does not apply to the Windows agents, so it is dimmed. Launch GroupWise Agents Now: This option applies only if you installed the agents as Windows applications, rather than services. Select this option to start the GroupWise agents as applications. 15 Click Finish, then return to the workstation where the Setup Advisor is running (if necessary). The GroupWise Setup Progress: Set Up Client Software page is displayed. Installing a Basic GroupWise System 55 16 GroupWise System Setup E xj GroupWise Setup Progress Novell. The final step is to set up the GroupWise client software. Y Collect system information W Create system Y Install agent software E Set up client software < Back Now that you have the Windows agents installed and running, continue with Setting Up and Running the GroupWise Windows Client on Your Local Machine. Setting Up and Running the GroupWise Windows Client on Your Local Machine 56 To set up the Group Wise Windows client on your local machine: 1 2 3 In the Setup Advisor, click Next to launch the GroupWise Windows client Setup program, then follow the prompts. When setup is finished, double-click the GroupWise shortcut on your desktop to start the GroupWise Windows client. Because the GroupWise client can get the location of your post office from eDirectory, and because you do not yet have a password on your mailbox, the GroupWise client starts without prompting you for post office and password information. If the Group Wise client cannot get the location of your post office from eDirectory or cannot access the post office, the GroupWise Startup page appears. You should make sure you are logged in through your own eDirectory user account and not through an Admin account, and your current eDirectory tree is the tree in which the post office is located. By default, the Group Wise client logs in to GroupWise as the user who is logged in at the workstation. If you are not logged in as yourself, you might receive a “user not found” error; specify your GroupWise user ID in the User ID field and click OK to log in. Get started with the GroupWise client by completing the following tasks: * Setting A Mailbox Password: After you are logged in and using GroupWise, one of the first things you should do is set a password on your mailbox so that other users can't access it. For information about setting a password, see Help in the GroupWise client. + Sending Messages and Scheduling Appointments: You can send messages to or schedule appointments with any users you have added to the post office. To test your system, you might want to send a message to yourself. As soon as users set up the Group Wise clients on their workstations, as described in “Setting Up the GroupWise Windows Client” on page 179, they will also be able to send messages and schedule appointments. * Using Document Management Services (Optional): GroupWise Document Management Services (DMS) lets you store documents in GroupWise libraries. Library documents can be shared with other users, versioned, and searched for within the library. The Setup Advisor created a library under the post office directory. For information about using Document Management Services, see Help in the Group Wise client. GroupWise 6.5 Installation Guide 4 Continue with Installing the GroupWise Administrator Snap-Ins to Additional Windows Locations. or If you have installed all the administrative software you need, skip to “What's Next” on page 68 Installing the GroupWise Administrator Snap-Ins to Additional Windows Locations As part of creating your basic GroupWise system, the GroupWise Administrator snap-ins to ConsoleOne were installed in one location (worksheet item 3). If ConsoleOne is installed in multiple locations and if you want to be able to administer GroupWise from those locations, you need to install the GroupWise snap-ins to each ConsoleOne installation. 1 2 Go to the Windows workstation or server where you want to install the Group Wise snap-ins to ConsoleOne. Make sure you are logged in as an Admin equivalent and have network access to the software distribution directory (or GroupWise 6.5 Administrator CD) and the domain directory. Start the Installation Advisor (setup.exe), then click Install Products > GroupWise Administration > Install GroupWise Administration. Accept the License Agreement, then provide the information requested by the Installation Advisor just as you did the first time you installed the GroupWise snap-ins. Repeat Step | through Step 4 for each location where you want to install the Group Wise snap- ins. Skip to “What's Next” on page 68. Setting Up a Basic GroupWise System on Linux You should have already reviewed “Planning Your Basic GroupWise System” on page 24 and filled out the worksheet. The following sections step you through the GroupWise Installation Advisor and Group Wise Setup Advisor on Linux. The Installation Advisor installs the Group Wise software on your Linux server. It then launches the Setup Advisor in ConsoleOne to create your domain and post office and set up the GroupWise agents. + + + “Starting the Group Wise Installation Advisor on Linux” on page 60 “Installing the Group Wise Software” on page 61 “Selecting a Linux Mount Directory” on page 62 “Using ConsoleOne to Create Your Basic Group Wise System” on page 63 “Installing and Starting the Group Wise Linux Agents” on page 64 “Setting Up and Running the Group Wise Cross-Platform Client on Your Local Machine” on page 67 “Installing the GroupWise Administrator Snap-Ins to Additional Linux Locations” on page 67 If you are new to Linux, you might want to review “Useful Linux Commands for Administering a Group Wise System” in GroupWise 6.5 Troubleshooting 2: Solutions to Common Problems before beginning to set up your GroupWise system on Linux. Installing a Basic GroupWise System 57 Starting the GroupWise Installation Advisor on Linux 1 Make sure that ConsoleOne is installed on your Linux server. ConsoleOne is installed in /usr/ConsoleOne/bin. If ConsoleOne and eDirectory have not yet been installed on your system, see “Novell eDirectory” on page 24. 2 Open a new terminal window, then enter the following command: xhost + localhost When creating your basic GroupWise system, you must run the GroupWise Installation Advisor in an environment where the X Window System is running and where your DISPLAY environment variable is set correctly. 3 In the same window, become root by entering su and the root password. 4 Change to the root of the GroupWise 6.5 for Linux Administrator CD. 5 Start the GroupWise Installation Advisor: ./install 6 Select the language in which you want to run the Installation Advisor and install software, then click OK. GroupWise 5 ET GroupWise. Novell 9 View the Readme Y Create or update a Group Wise system ® Install Products Y Visit the Novell Group Wise Web Site If the X Window System is not installed or if your DISPLAY environment variable is not set correctly, a text-based Installation Advisor starts instead of the interface illustrated above. You cannot create a GroupWise system in the text-based Installation Advisor. It is designed for installing individual GroupWise components, not for creating a GroupWise system. If necessary, move to a Linux machine where the X Window System is running in order to run the GroupWise Setup Advisor to create your basic GroupWise system. 7 Continue with Installing the GroupWise Software. Installing the GroupWise Software 1 Click Create or Update a GroupWise System. 58 GroupWise 6.5 Installation Guide GroupWise Administration Configuration Introduction q Introduction Welcome to the GroupWise Administration Configuration Program. This program will do the following: e Install Administration and Agent software e Set up the software distribution directory e Update an existing GroupWise system or launch ConsoleOne to allow creation of anew GroupWise system ase oe ¿un Cancel | | Next 2 Review what the Installation Advisor accomplishes for you, then click Next. 3 4 5 The list on the left details the steps the Installation Advisor performs for you. Accept the License Agreement, then click Next. Specify or browse to and select the software distribution directory (worksheet item 4), then click Next. Select the software components you want to copy into the software distribution directory (worksheet item 5), then click Next. The Installation Advisor automatically installs the GroupWise agent software to the bin and lib subdirectories of /opt/novell/groupwise/agents. It also installs the GroupWise Administrator snap-ins to ConsoleOne under /usr/ConsoleOne. After installing the standard components, the Installation Advisor copies the selected software components into your software distribution directory. When the copying is complete, click Next. GroupWise Administration Configuration ©) E x Next Step [Y] Introduction Are you bj License Agreement «e Updating an existing GroupWise system? [Y] Software Distribution + Creating anew GroupWise system? Directory [F] Select Software [Y] Copy Files [i Next Step a Cancel | | Next | Select Creating a New GroupWise System, then click N ext. You use the New System utility in ConsoleOne to create your basic Group Wise system. 8 Review the instructions for accessing the New System utility in ConsoleOne, then click OK. 9 Continue with Selecting a Linux Mount Directory Installing a Basic GroupWise System 59 Selecting a Linux Mount Directory The first time you start ConsoleOne with the GroupWise Administrator snap-ins installed, you are prompted to specify a Linux mount directory under which you create mount points. Typically, Linux servers and workstations use /mnt for this purpose. In the future as your system grows, this information helps ConsoleOne resolve the UNC paths of Group Wise database locations into Linux paths. Although the mount directory information is not used when you are creating your basic Group Wise system, it is gathered at this time for later reference. GroupWise databases can be located on Linux servers, NetWare servers, or Windows servers. In the Linux mount directory, you will eventually create mount points that have the same names as the servers that are mounted to those mount points. You will need to do this for each server where a domain or post office is located that you want to access from ConsoleOne. The following table illustrates the correspondence between UNC paths and mount points for GroupWise database locations on Linux, NetWare, and Windows, assuming the typical mount directory of /mnt: Platform GroupWise Domain UNC Path Corresponding Linux Mount Point Linux \\Linux_serve\GW_partition\domain_directory /mnt/Linux_server!GW_partition NetWare \\NetWare_serve\GW_volume\domain_directory Imnt/NetWare_server!/GW_volume Windows \\Windows_serve\GW_share\domain_directory /mnt/Windows_server!GW_share IMPORTANT: Although NetWare and Windows are not case-sensitive operating systems, the case of characters in pathnames becomes significant when the directory structure is mounted to a Linux server or workstation. 1 In the Installation Advisor, click Run to start ConsoleOne and display the Linux Mount Directory dialog box. GroupWise Administrator D XX Linux Mount Directory: [mnt 13 Enter a valid path to the mount directory and click OK, or click Cancel to continue. OK Cancel 2 Browse to and select the Linux mount directory, then click OK. A typical Linux mount directory is /mnt. In the future, you and other GroupWise administrators might have different mounts points depending on the workstation or server where ConsoleOne is being run. To change the mount directory later in ConsoleOne, click Tools > GroupWise System Operations > System Preferences > Linux Settings. The mount directory information is stored in a user-specific preferences file (.consoleone/SnapinPrefs.ser in each GroupWise administrator’s home directory). 3 Continue with Using ConsoleOne to Create Your Basic GroupWise System. Using ConsoleOne to Create Your Basic GroupWise System On Linux, ConsoleOne does not automatically authenticate to any eDirectory trees when it starts, so the NDS object is not immediately expandable. 60 GroupWise 6.5 Installation Guide KS Novell ConsoleOne <3> ÉL = = File Edit View ools Help mess ereja [2] ® nos © E Groupwise System |: 1 In ConsoleOne, select NDS, then click File > Authenticate. 2 Fillin the following fields: Login Name: Provide a Novell eDirectory username that has rights to create eDirectory objects. Password: Provide the password for the username. Tree: Type or select the eDirectory tree where you want to create Group Wise objects. If the eDirectory tree is located on a Windows server, you might need to specify the IP address of the server instead of the tree name. Context: Provide the full context of the User object associated with the username you provided. 3 Click Login. 4 Under the NDS object, select the tree where you want to create the GroupWise system, then click Tools > GroupWise Utilities > New System. GroupWise System Setup = GroupWise Setup Progress The first step in creating a GroupWise system is to collect information about the system you want to create. Novell. [ag Collect system information e Create system e Install agent software Back | Next > | Cancel | Finish | Help | 5 Follow the prompts to provide the information you planned using the “Basic GroupWise System Worksheet” on page 70. 6 After creating your basic GroupWise system, click Next to continue. Installing a Basic GroupWise System 61 7 Click Next to install the POA and MTA software. 8 Continue with Installing and Starting the GroupWise Linux Agents. Installing and Starting the GroupWise Linux Agents At this point, the Setup Advisor has created eDirectory objects and network server directories associated with your GroupWise system. You now need to install and start the MTA and POA on your Linux server. + “Installing the Linux Agents” on page 64 ¢ “Starting the Linux Agents for the First Time” on page 65 Installing the Linux Agents The Setup Advisor starts the Agent Configuration program for you. GroupWise Agents Configuration Introduction LI Introduction Welcome to the GroupWise Agent Configuration Program. The following agent software will be configured: Message Transfer Agent(MTA): Routes messages between oO domains, post offices, and gateways. LI Post Office Agent(POA): Delivers messages to users’ mailboxes. | Cancel Next 1 Review the Introduction, then click Next. 2 Acceptthe License Agreement, then click Next. On the Configuration Complete page, Launch Group Wise Agents on System Startup is selected by default. 3 If you do not want the agents to start automatically when the server restarts, deselect Launch Group Wise Agents on System Startup. 4 Click Exit to complete the configuration. 5 Continue with Starting the Linux Agents for the First Time. Starting the Linux Agents for the First Time 1 Ina terminal window, become root by entering su and the root password. 2 Change to the GroupWise agent bin directory. cd /opt/novell/groupwise/agents/bin 3 Enter the following command to start the MTA: Syntax: ./gwmta --show --home domain directory & Example: ./gwmta --show --home /gwsystem/domlnx & 62 GroupWise 6.5 Installation Guide The --show startup switch starts the MTA with an agent console interface similar to that provided for the NetWare and Windows MTAs. This user interface requires that the X Window System and OpenMotif be running on the Linux server. The --home startup switch specifies the domain directory and is required to start the MTA. The ampersand (&) causes the MTA to run in the background, so that the terminal window you started it in is again available for use. & Provo3- GroupWise MTA.) File Configuration Log Help Provo3 Up Time: 3 Days 8 Hrs 12 Mins Groupllise Message Transfer Agent Domains Post Offices 1 Gateways <02/26/2004 06:09:06 AM> DIS: Error initializing HTTP: [8568] <02/26/2004 06:09:06 AM> DIS; HTTP is not enabled <02/26/2004 06:09:06 AM> DIS: MTA configuration loaded o 06:11:14 AM> TCP/IP: Closed for inbound traffic ee The status messages displayed on the MTA agent console are also written to the MTA log file (mmddmta.nnn) in the /var/log/novell/groupwise/domain.mta directory. The log file name includes the month and day when it was created, along with an incrementing extension to accommodate multiple log files on the same day. In ConsoleOne, you can see that the domain database has been updated by the MTA because the Version field on the Domain object shows 6.5 when the update is complete. Wait until the domain has been updated before you start the POA. Use the following command to start the POA: Syntax: ./gwpoa --show --home post office directory & Example: ./gwpoa --show --home /gwsystem/polnx & Installing a Basic GroupWise System 63 ©% Research.Provo3 - GroupWise POA DS px File Configuration Log Statistics Actions Help Research,Provo3 Up Time: 3 Days 8 Hrs 13 Mins GroupWise Post Office Agent Status Statistics Processing * Busy: 0 ; 0 C/S Requests: 3731 Total Messages? 0 User Connections: 2 | Requests Pending: 0 Undeliverable: 0 File Queues: o || User Timed Out: 2 Problem Messages? 0 00:00:01 803 Check disk space every: 5 (mins) A 00:00:01 803 Perform disk check actions no more than every: 2 (hrs) 00:00:01 803 Event #1 : Default POA Disk Check Event 00:00:01 803 Free disk space thresho! OMB 00:00:01 803 Action Set #1 ; Default POA Disk Check Actions 00:00:01 803 Hail message to administrator: upon failure 00:00:01 803 Type of database files to check: User Msg Doc 00:00:01 803 Database check action: Reduce 00:00:01 803 Delete temporary/backup files older than (days): 1 00:00:01 803 00:00:01 803 Database Maintenance Events; 00:00:01 803 Event #1 : Default POA Mailbox/Library Maintenance Event 00:00:01 803 Days to perform action(s): F 00:00:01 803 Time to perform action(s}: Midnight (12am) 00:00:01 803 Action Set #1 : Default POA Mailbox/Library Maintenance Actions 00:00:01 803 Type of database files to check: User Msg Doc 00:00:01 803 Database check action: Analyze/Fixup 00:00:01 803 Level of database analysis and verification: Structural 00:00:01 803 Delete temporary/backup files older than (days): 7 00:00:01 803 00:00:14 C1A Guardian database: OK eS The status messages displayed on the POA agent console are also written to the POA log file (mmddpoa.nnn) in the /var/log/novell/groupwise/post_office.poa directory. The log file name includes the month and day when it was created, along with an incrementing extension to accommodate multiple log files on the same day. In ConsoleOne, you can see that the post office database has been updated by the POA because the Version field on the Post Office object shows 6.5 when the update is complete. After the post office database has been updated, you can install the GroupWise Cross- Platform client and connect to the post office. If you want to finish setting up your basic GroupWise system, continue with Setting Up and Running the GroupWise Cross-Platform Client on Your Local Machine. or If you want to learn more about managing the GroupWise agents on Linux, skip to the following sections in Chapter 7, “Installing GroupWise Agents,” on page 155: * “Starting the Linux Agents as Daemons” on page 169 + “Monitoring the Linux Agents from Your Web Browser” on page 170 + “Using Agent Startup Files” on page 170 * “Starting the Linux Agents on System Startup” on page 170 + “Stopping the Linux Agents” on page 171 Setting Up and Running the GroupWise Cross-Platform Client on Your Local Machine 64 On Linux, the Create or Update a Group Wise System option in the Setup Advisor does not include installation of the GroupWise Cross-Platform client. 1 On the GroupWise Installation main page, click Install Products > Install GroupWise Client. 2 When the Cross-Platform client files have been copied, click OK. To start the Cross-Platform client: 3 Change to the client installation directory: cd /opt/novell/groupwise/client/bin 4 Enter the following command: . /groupwise GroupWise 6.5 Installation Guide GroupWise Client Login <> D AAA User ID (Required): | Password: | @ Online Address: | Port : [1677 | © Caching mailbox path : E Specify your Group Wise user ID, password, and the required information about the server where the POA is running (worksheet item 18), then click OK. For your convenience, the Installation Advisor created a shortcut for the Cross-Platform client on your desktop to simplify this process. Get started with the GroupWise Cross-Platform client by completing the following tasks: * Setting A Mailbox Password: After you are logged in and using GroupWise, one of the first things you should do is set a password on your mailbox so that other users cannot access it. For information about setting a password, see Help in the Group Wise client. + Sending Messages and Scheduling Appointments: You can send messages to or schedule appointments with any users that you have added to the post office. To test your system, you might want to send a message to yourself. As soon as users set up the GroupWise clients on their workstations, as described in “Setting Up the GroupWise Cross-Platform Client” on page 181, they will also be able to send messages and schedule appointments. Continue with Installing the GroupWise Administrator Snap-Ins to Additional Linux Locations. or If you have installed all the administrative software you need, skip to “What's Next” on page 68. Installing the GroupWise Administrator Snap-Ins to Additional Linux Locations As part of creating your basic GroupWise system, the GroupWise Administrator snap-ins to ConsoleOne were installed in one location (worksheet item 3). If ConsoleOne is installed in multiple locations and if you want to be able to administer GroupWise from those locations, you need to install the GroupWise snap-ins to each ConsoleOne installation. 1 3 4 Go to the Linux workstation or server where you want to install the GroupWise snap-ins to ConsoleOne. Make sure you are logged in as root and have network access to the software distribution directory (or GroupWise 6.5 for Linux Administrator CD) and the domain directory. Start the Installation Advisor (install at the root of the CD), then click Install Products > Group Wise Administration > Install GroupWise Administration. When the installation is complete, select Configure GroupWise Administration. Accept the License Agreement, then provide the information requested by the Installation Advisor just as you did the first time you installed the GroupWise snap-ins. Repeat Step 1 through Step 5 for each location where you want to install the Group Wise snap- ins. Continue with What’s Next. Installing a Basic GroupWise System 65 What’s Next 66 After you have set up your basic GroupWise system, you can expand the system by: + Setting up messaging access to the Internet through the Group Wise Internet Agent. See Chapter 4, “Installing the Group Wise Internet Agent,” on page 77. Setting up Group Wise WebAccess so that users can access their mailboxes through a Web browser on a computer or wireless device such as a telephone. See Chapter 5, “Installing Group Wise WebAccess,” on page 99. Setting up Group Wise Monitor to monitor your Group Wise agents. See Chapter 6, “Installing Group Wise Monitor,” on page 135. Installing the MTA or POA on adifferent server than the one you installed to during the basic system setup. See Chapter 7, “Installing Group Wise Agents,” on page 155. Setting up users to run the Group Wise client on their workstations. See Chapter 8, “Installing the Group Wise Windows and Cross-Platform Clients,” on page 177. Setting up users with instant messaging capabilities. See Chapter 9, “Installing GroupWise Messenger,” on page 183. Adding more users to the post office. See “Users” in the Group Wise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Defining resources that users can schedule. See “Resources” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Defining groups of users that Group Wise users can select when addressing messages. See “Distribution Lists, Groups, and Organizational Roles” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Configuring your current post office’s library or setting up additional libraries. See “Libraries and Documents” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). Setting up Group Wise Remote so that Windows client users can access their mailboxes from a computer that is not directly connected to your network. See “Client” in the Group Wise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Changing the GroupWise client from standard Online mode to Caching mode so that users’ messages are stored on a local drive rather than at the post office. See “Client” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Adding additional post offices to the domain. See “Post Offices” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Adding additional domains to the system. See “Domains” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Configuring the Post Office Agent (POA) and Message Transfer Agent (MTA) to support secure connections (SSL). See “Post Office Agent” and “Message Transfer Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Connecting to other GroupWise 5.x or 6.x systems. See “System” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). GroupWise 6.5 Installation Guide Basic GroupWise System Worksheet The GroupWise Installation Advisor helps you install the GroupWise software. It then launches the GroupWise Setup Advisor, which helps you set up your first domain and post office. The Advisors prompt you for the information in the worksheet. You should print the worksheet and carefully fill in the information for your system. Item 1) Tree Name: 2) Languages to Install: 3) ConsoleOne Path: 4) Software Distribution Directory: Example NOVELL_TREE English-US German c:\novell\consoleone\1.2 or z:/public/mgmt/consoleone or /usr/ConsoleOne z:\grpwise\software or \\server1\vol1\grpwise\software or /opt/novell/groupwise/software Explanation Specify the name of the eDirectory tree where your domain and post office will be created. Because GroupWise introduces new objects into the tree, the eDirectory schema must be extended. See “Novell eDirectory” on page 24. Specify the languages to install for GroupWise Administrator, the GroupWise agents, and the GroupWise clients. See “GroupWise Languages” on page 27. Specify the path to a ConsoleOne location, either on the local workstation or on a network server. The GroupWise Installation Advisor installs the GroupWise Administrator snap-in files in the specified location. ConsoleOne 1.3.4 (or higher) is required to run ConsoleOne on Windows. If necessary, you can install ConsoleOne 1.3.4 at the same time you install the GroupWise Administrator snap-ins. On Linux, ConsoleOne 1.3.7 (or higher) is required. ConsoleOne must be installed before you start the Setup Advisor on Linux. See “ConsoleOne” on page 25. Specify the directory path for the software distribution directory. If the directory does not exist, it is created. The path should be from the perspective of the machine you plan to use to install GroupWise. See “GroupWise Software Distribution Directory” on page 26. Installing a Basic GroupWise System 67 Item 5) Software Selection: * GroupWise Administration + GroupWise agents + Internet Agent + WebAccess + GroupWise client + Monitor 6) System Name: 7) Domain Name: 8) Domain Directory: 9) Domain Context: 10) Domain Language: 11) Domain Time Zone: Example GroupWise Administration Agents Client Novell Provo j:\provo or \\server1\vol1\gwsystem\provo or /gwsystem/provo groupwise.novell English Pacific Time 68 GroupWise 6.5 Installation Guide Explanation Select the software you want copied to the software distribution directory. See “GroupWise Software Distribution Directory” on page 26. Specify a one-word name. Names can reflect companies, locations, and so forth. See “System and Domain Names” on page 28. Specify a one-word name. Names can reflect locations, organizations, and so forth. See “System and Domain Names” on page 28. Specify the path for the domain directory. If the directory does not exist, it is created. On NetWare, do not use a directory name that exceeds 8 characters. On Linux, use lowercase letters. The path should be from the perspective of the machine you plan to use to install GroupWise. See “Domain Directory” on page 29. Specify the eDirectory context where you want to create the Domain object. Make sure the context exists before you start installing GroupWise. See “Domain Context” on page 29. Specify a language for the domain. The language determines how times, dates, and numbers are displayed in the GroupWise client and affects the sorting order for items in the GroupWise Address Book. See “Domain Language” on page 32. Specify the time zone where the domain is located. The time zone information is used to ensure that times for messages sent between time zones are adjusted properly. See “Domain Time Zone” on page 32. Item 12) Post Office Name: 13) Post Office Directory: 14) Post Office Context: 15) Post Office Language: 16) Post Office Time Zone: 17) Post Office Link: + TCP/IP link + Direct link Example Research j:\research or \\server1\vol1\gwsystem\research /gwsystem/research groupwise.novell English Pacific Time TCP/IP link Explanation Specify a one-word name. Names can reflect locations, organizations, and so forth. See “Post Office Name” on page 33. Specify the path for the post office directory. If the directory does not exist, it is created. On NetWare, do not use a directory name that exceeds 8 characters. On Linux, use lowercase letters. The path should be from the perspective of the machine you plan to use to install GroupWise. See “Post Office Directory” on page 33. Specify the eDirectory context where you want to create the Post Office object. Make sure the context exists before you start installing GroupWise. See “Post Office Context” on page 34. The post office language defaults to the domain language. Specify a different language if you do not want the post office to use the default domain language. See “Post Office Language” on page 35. The post office time zone defaults to the domain time zone. Specify a different time zone if the post office is not in the same time zone as the domain. See “Post Office Time Zone” on page 35. Select whether you want the Message Transfer Agent (MTA) to link to the post office through a TCP/IP connection to the Post Office Agent (POA) or a direct connection to the post office directory. See “MTA Link to the Post Office” on page 38. If you mark Direct Link, skip to worksheet item 20. Installing a Basic GroupWise System 69 Item 18) POA Network Address: * IP address or DNS hostname: + Client/Server port: (default = 1677) + Message transfer port: (default = 7101) * HTTP port: (default = 7181) 19) MTA Network Address: * IP address or DNS hostname: * Message transfer port: (default = 7100) * HTTP port: (default =7180) 20) Post Office Users: 21) Agent Platform: * NetWare * Linux + Windows Example IP address: 172.16.5.18 C/S port: 1677 MT port: 7101 HTTP port: 7181 IP Address: 172.16.5.18 MT port: 7100 HTTP port:7180 jsmith.r&d.novell NetWare 70 GroupWise 6.5 Installation Guide Explanation This item applies only if you selected TCP/IP as the post office link method (worksheet item 17). Specify the IP address or DNS hostname of the POA's server. By default, the POA listens for the GroupWise client on Client/Server port 1677. If this port is already being used, specify a different C/S port number (for example, 1678). By default, the POA listens for the MTA on Message Transfer port 7101 (if the MTA and POA are communicating using TCP/IP). If this port is already being used, specify a different MT port number (for example, 7102). By default, the POA uses HTTP port 7181 for the Web console. The Web console enables you to view POA information through a Web browser. If this port is already being used, specify a different HTTP port number (for example, 7183). See “MTA Link to the Post Office” on page 38. This item applies only if you selected TCP/IP as the post office link method (worksheet item 17). Specify the IP address or DNS hostname of the server running the Message Transfer Agent. By default, the MTA listens for the POA on Message Transfer port 7100. If this port is already being used, specify a different MT port number (for example, 7103). By default, the MTA uses HTTP port 7180 for the Web console. The Web console enables you to view MTA information through a Web browser. If this port is already being used, specify a different HTTP port number (for example, 7182). See “MTA Link to the Post Office” on page 38. Specify the users who will have mailboxes on the post office. The Setup Advisor lets you browse the eDirectory tree to select the users you want. Adding users at this point is optional. After the Setup Advisor has finished, you can add users to the post office at any time. See “Post Office Users” on page 35. Specify the platform (NetWare, Linux, or Windows) where you want to run the GroupWise agents. See “Agent Platform” on page 36. Item 22) Agent Installation Path: 23) Agent Language: 24) Windows Agent Installation Options: * Install GroupWise agent software: Yes | No ¢ Install and configure SNMP for GroupWise Agents: Yes | No * Install as Windows services: Yes | No 25) Windows Service Information: * Use local system account + Use a user account + Startup: Automatic | Manual Example z:\system or \\server1\vol1\system or /opt/novell/groupwise/agents English Install GroupWise agent software Install as Windows services Use a user account: username = gwagents password = admin Startup: automatic Explanation Specify the path to the directory where you want to install the agents. We recommend that you install the NetWare agents to the sys:\system directory to simplify the use of startup files and ensure that dependent NLM programs load properly. You can install the Windows agents to any directory on the Windows server. Because the installation is done from the Windows server, the default is c:\grpwise. The Linux agents are automatically installed into the bin and lib subdirectories of /opt/novell/groupwise/agents. See “Agent Location” on page 36. Specify the language in which you want to be able to run the agents. See “Agent Language” on page 39. This item applies only if you are installing the Windows agents. Specify the installation options you want to use. The Install GroupWise Agent Software option needs to be selected to install the files. The Install and Configure SNMP for GroupWise Agents option requires the SNMP service to already be enabled on the Windows server. If SNMP is not enabled, this option is dim in the Installation Advisor. The Install as Windows Services option configures the agents as Windows services. See “Windows Application vs. Windows Service (Windows Agents Only)” on page 38. This item applies only if you are installing the Windows agents as Windows services. Select whether you want the services to use the local system account or another user account. If the domain and post office directories are on the same Windows server as the agents, you can use the local system account. If the domain and post office directories are on a different server, specify a different user account that exists in eDirectory and has rights to the domain and post office directories. Select whether you want to manually start the services or have them start automatically when the server starts. See “Windows Application vs. Windows Service (Windows Agents Only)” on page 38. Installing a Basic GroupWise System 71 72 GroupWise 6.5 Installation Guide Installing the GroupWise Internet Agent The Novell® GroupWise® Internet Agent enables you to send and receive messages over the Internet. The following sections provide information to help you successfully install the Internet Agent in your existing GroupWise system. * “GroupWise Internet Agent Overview” on page 77 * “Internet Agent System Requirements” on page 80 * “Planning the GroupWise Internet Agent” on page 82 * “Setting Up the Internet Agent” on page 86 + “What's Next” on page 95 * “GroupWise Internet Agent Installation Worksheet” on page 95 After you’ ve installed the Internet Agent, there are additional tasks you can perform to optimize and maintain your GroupWise system. These tasks are discussed under “What's Next” on page 95. NOTE: If you plan to install the Internet Agent in a clustered server environment provided by Novell Cluster Services™ or Microsoft Clustering Services, see the GroupWise 6.5 Interoperability Guide for additional information. GroupWise Internet Agent Overview The Internet Agent allows communication between Group Wise users and users of other messaging systems who use the Internet to send e-mail. The Internet Agent picks up inbound e-mail messages from the Internet, converts them from RFC-822 or MIME format to the GroupWise message format, and then passes the converted messages to the GroupWise Message Transfer Agent (MTA). For outgoing messages transported by the Internet, the GroupWise MTA passes the message to the Internet Agent, which then converts the message to Internet messaging format, and then sends it to the designated Internet address. Installing the GroupWise Internet Agent 73 PO > VA PO Domain DO Q N PO Q GWIA « l Domain coni ©) ©—® PO N È PO Domain Q — Q SS PO > PO Choose from the following list of topics to learn more about the capabilities of the Group Wise Internet Agent. + “SMTP/MIME Service” on page 78 + “POP3 Service” on page 79 + “IMAP4 Service” on page 79 * “LDAP Services” on page 79 * “Secure Connections via SSL” on page 80 * “Access Control” on page 80 * “Multiple Threading” on page 80 + “SNMP-Compliant” on page 80 * “SMP Support (NetWare Version)” on page 80 SMTP/MIME Service 74 The SMTP/MIME service in the Internet Agent allows you to send and receive e-mail with standard encoding on attachments, international character sets, and multipart messages. Multimedia e-mail with graphics, sound, and video can also be exchanged. The service also includes these additional features: * SMTP Dial-Up Service: The Internet Agent includes SMTP dial-up functionality. This can be useful when your system does not meet the requirements of a dedicated Internet connection, or when you prefer not to have a permanent Internet connection. With the SMTP dial-up feature, you can establish a schedule to periodically check the message store without having to maintain a permanent link. GroupWise 6.5 Installation Guide POP3 Service IMAP4 Service LDAP Services * Flexible Addressing: The Internet Agent offers full GroupWise addressing support, including system groups, nicknames, and individual users. The Internet Agent also takes advantage of Group Wise Internet addressing, which allows inbound messages addressed in a variety of formats to be delivered to GW users. These formats include: UserID@Internet domain name UserID.PostOffice@Internet domain name Last Name.First Name@Internet domain name First Name.Last Name@Internet domain name First Initial Last Name@Internet domain name + Internet Users in the Address Book: Internet users can be added to the Group Wise Address Book so users won't have to remember long Internet addresses. * Real-Time Blacklists: Many organizations, such as Mail Abuse Prevention System (MAPS*), Open Relay DataBase (ORDB), and SpamCop, provide lists of IP addresses that are known to be open relay hosts or spam hosts. You can use the real-time blacklists provided by these sites to protect your users from offensive spam. * Accounting: The accounting feature provides inbound and outbound tracking of messages passing through Internet Agent. This lets administrators track how the Internet Agent is being used. * DNS Name Resolution: The Internet Agent can access a DNS server directly to resolve host names to IP addresses, or it can rely on a relay host to perform the name resolution. * Connect to Other GroupWise Systems Through the Internet: Using passthrough addressing, you can connect to other GroupWise systems anywhere on the Internet and have access to all of the Group Wise features. The Internet simply becomes a mail transport medium for GroupWise. The POP3 service in the Internet Agent allows you to download messages from your GroupWise post office to a POP3 client application such as a Web browser’s e-mail program or a Telnet application. The Internet Agent acts as the POP3 server, providing a TCP connection between the user's Group Wise post office and a POP3 client. Accessing the Group Wise post office via the Internet Agent’s POP3 server capability, users can retrieve their e-mail messages and manage them through user ID login options. The GroupWise Internet Agent supports the Internet Messaging Access Protocol 4 (IMAP4). As an IMAP4 server, the Internet Agent allows IMAP4-compliant e-mail clients to read and manipulate GroupWise messages. The Internet Agent supports the Lightweight Directory Access Protocol (LDAP) directory standard with LDAP server capability that allows access for directory searches of GroupWise post offices. Using LDAP Public Access, Internet mail clients can do lookups on GroupWise users and address information. Installing the GroupWise Internet Agent 75 Secure Connections via SSL The Internet Agent supports the use of SSL for its connections to SMTP hosts, POP3 clients, IMAP4 clients, and Internet Agent Web consoles. Access Control The Internet Agent program includes security capabilities called Access Control that allow administrators to control user access to all services (SMTP/MIME, LDAP, POP3, and IMAP4). Access Control can help you reduce costs and provide added security. With the SMTP/MIME service, Access Control can be used to block messages being sent to or received from specific hosts. Multiple Threading Multiple threading allows more than one send or receive process to be running concurrently. You can configure the number of threads to enhance the speed and performance of the Internet Agent. The number of thread switches are set separately for the SMTP/MIME service, POP3 service, IMAP4 service, and LDAP service. SNMP-Compliant The NetWare version of the Internet Agent can be managed by any SNMP-compliant network manager, such as the Novell ManageWise® network management suite or the alarm management features of Novell ZENworks® Server Management. The Windows version of the Internet Agent includes SNMP support for Windows NT and Windows 2000. The Linux version of the Internet Agent is also SNMP compliant. SMP Support (NetWare Version) The Internet agent supports Symmetric Multi-Processing (SMP), letting it take advantage of a server with multiple processors. Internet Agent System Requirements The following sections define the Internet Agent’s requirements: * “Network Server Requirements” on page 80 * “GroupWise System Requirements” on page 81 + “Internet Connectivity Requirements” on page 81 Network Server Requirements The network server where you install the Internet Agent must meet the following requirements: A 32-bit/x86 processor A Any of the following server operating systems: + NetWare® 4.2, NetWare 5.1, or NetWare 6.x, plus the latest Support Pack for your version of NetWare 76 GroupWise 6.5 Installation Guide + SUSE? Linux Standard Server 8, SUSE Linux Enterprise Server 8, SUSE Linux Enterprise Server 9, Red Hat Enterprise Linux 3 ES, or Red Hat Enterprise Linux AS OpenMotif is required by the GUI Internet Agent console. The Internet Agent can also run as a daemon without a user interface. * Windows NT Server, Windows 2000 Server, Windows 2003 Server, plus the latest Support Pack for your version of Windows O Adequate server disk space: * 17 MB for the Internet Agent program files. * 200 MB minimum for message file processing. The actual amount will be determined by the number and size of message files being processed at one time by the Internet Agent. O Adequate RAM + 12 MB. This is the amount of memory the Internet Agent needs to operate. It does not include memory for the operating system or for TCP/IP connectivity. This amount can increase depending on message size and complexity. GroupWise System Requirements The GroupWise system in which you install the Internet Agent must meet the following requirements: O The domain’s version must be equal to or newer than the Internet Agent’s version. The domain’s version is determined by the Message Transfer Agent (MTA) version running against it. O The versions of any post offices that the Internet Agent will access on behalf of POP3 or IMAP4 clients must be equal to or newer than the Internet Agent’s version. A post office’s version is determined by the Post Office Agent (POA) version running against it. Internet Connectivity Requirements Before you install the Internet Agent, you need to ensure that your network is configured for Internet connectivity. O Internet Connection: You can connect to the Internet using a direct connection over a leased line or a standard switched telephone line. UA Internet Domain Name: You must have an Internet domain name. The domain name must be defined by an MX RR (mail exchanger resource record) in DNS. U DNS Server Access or Relay Host Access: If you want the Internet Agent to send messages directly to other SMTP hosts, it requires access to a DNS server for address resolution. Otherwise, it requires access to a relay host that can perform the address resolution and message routing. Make sure the network server where you plan to install the Internet Agent is configured to access a DNS server or can access your relay host. For specific details, refer to your server documentation. O IP Address: The Internet Agent’s server requires a static IP address and fully qualified hostname. Installing the GroupWise Internet Agent 77 Planning the GroupWise Internet Agent Use the “GroupWise Internet Agent Installation Worksheet” on page 95 to record your decisions about how to install the Internet Agent as you review the following considerations: + “Selecting the Internet Agent Platform” on page 82 + “Selecting the Internet Agent Installation Directory” on page 82 * “Gathering Domain and Gateway Information” on page 83 + “Selecting the Gateway Object Name” on page 83 + “Specifying the Internet Mail Domain Name for Your Group Wise System” on page 83 * “Handling Outbound Mail” on page 83 + “Clustering the NetWare Internet Agent” on page 84 + “Configuring the Windows Internet Agent” on page 84 + “Enabling the Internet Agent Web Console” on page 85 * “Gathering LDAP Information (Linux Only)” on page 86 Selecting the Internet Agent Platform The Internet Agent is available as a NetWare NLM™ program, a Linux executable, and a Windows executable. GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 1: Software Platform, mark whether you plan to install the Internet Agent on NetWare, Linux, or Windows. Review “Internet Agent System Requirements” on page 80 to ensure that the specific server you have selected meets the listed requirements. Selecting the Internet Agent Installation Directory You should install the Internet Agent on the same server where the domain directory is located. The Internet Agent installation directory depends on the platform where you are installing it. Consider these platform-specific guidelines: + NetWare: When installing the NetWare Internet Agent, we recommend you use the sys:\system directory on the NetWare server. This simplifies access to the Internet Agent configuration file and ensures that the NLM program is in the server”s search path. If you use a different directory, you must add that directory to the server’s search path. * Linux: The Linux Internet Agent is automatically installed to the bin and lib subdirectories under /opt/novell/groupwise/agents. + Windows: The default installation directory is c:\grpwise\gwia. However, you can install the Internet Agent to any directory you want. GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 3: Installation Path, record the directory where you want to install the Internet Agent software. 78 GroupWise 6.5 Installation Guide Gathering Domain and Gateway Information The Internet Agent requires a GroupWise gateway directory in which to store configuration information and work files. The gateway directory must be located under a GroupWise domain directory. The default directory name is GWIA on NetWare and Windows, gwia on Linux. If you change the name on NetWare, use a maximum of 8 characters in the new name. If you change the name on Linux, use lowercase letters. After you specify the domain directory location and a gateway directory name, the Installation Advisor creates the gateway directory under the domain\wpgate directory (for example, provo\wpgate\gwia on NetWare and Windows, provo/wpgate/gwia on Linux). GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 5: GroupWise Domain, specify the domain name and the full path to the domain directory where you want to create the gateway directory, then give the gateway directory a name. If you are installing the Linux Internet Agent, record the eDirectory™ context of the Domain object (for example, cn=provo3,ou=groupwise,o=corporate). Selecting the Gateway Object Name The Internet Agent also requires a GroupWise Gateway object in Novell eDirectory. This object stores the Internet Agent’s information and enables configuration of the agent through ConsoleOne®. The Internet Agent’s object is created below the Domain object. If you have multiple domains, the Installation Advisor uses the Domain object associated with the domain directory where you are creating the Internet Agent’s gateway directory. GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 6: GroupWise Internet Agent Name, specify the name you want to give the Internet Agent's object. The default name is the same as the gateway directory name you chose for Item 5. Specifying the Internet Mail Domain Name for Your GroupWise System When e-mail users across the Internet address messages to GroupWise users, the address includes the Internet mail domain for your GroupWise system (for example, novell.com). Typically, the Internet mail domain name for your GroupWise system is the name of your company, with its accompanying domain type (.com, .edu, etc.). GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 7: Internet Mail Domain name, specify the name you want your GroupWise system to be known by across the Internet. Handling Outbound Mail If the Internet Agent is connected to the Internet and is able to perform DNS name resolution, it can send messages from GroupWise users across the Internet to Internet users. However, you might prefer to keep the Internet Agent behind your firewall. To accomplish this, you can configure the Internet Agent to route all outbound messages to a relay host. Installing the GroupWise Internet Agent 79 GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 4: Relay Host, mark how you want to handle outbound mail. If you plan to use a relay host, specify the IP address of the relay host. Clustering the NetWare Internet Agent Novell Cluster Services is a server clustering system that ensures high availability and manageability of critical network resources including volumes (where GroupWise domains reside) and applications (such as the Internet Agent). Novell Cluster Services supports failover, failback, and migration of individually managed cluster resources. The NetWare Internet Agent can be configured to take advantage of the fault-tolerant environment provided by Novell Cluster Services if the following requirements are met: * The domain where the Internet Agent is installed has already been created on a shared NSS volume in the cluster. * The NetWare Internet Agent is being installed to a server that is part of the same cluster. When the agents are configured for clustering, their startup files are configured with shared volume names rather than specific server names. In addition, the POA is configured to more effectively re-establish logins with GroupWise clients when a failover or migration situation arises. GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 2: Installation Options, mark whether or not you want to configure the NetWare Internet Agent for clustering. Additional configuration of the Internet Agent object in ConsoleOne is required to complete the agent setup in a clustering environment, as described in “Implementing the Internet Agent in a Novell Cluster” in “Novell Cluster Services” in the GroupWise 6.5 Interoperability Guide (http:/ /www.novell.com/documentation/gw65). Configuring the Windows Internet Agent When you install the Windows Internet Agent, you have choices about how the Internet Agent interacts with the Windows operating system. * “Configuring the Windows Internet Agent as a Service” on page 84 * “Using SNMP Traps to Monitor the Windows Internet Agent” on page 85 Configuring the Windows Internet Agent as a Service &0 When you run the Windows Internet Agent as a service, it can start automatically and run without a user interface. GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 2: Installation Options, mark Install as Windows Service if you want to run the Internet Agent as a service. GroupWise 6.5 Installation Guide When you run the Windows Internet Agent as a service, it must run under a specific Windows user account. When the Internet Agent domain is located on the same server where you are installing the Internet Agent, the Internet Agent can run under the local system account. You can also display the Internet Agent console when the agent software, directories, and databases are local. When the Internet Agent domain is located on a remote server, you must specify a user with rights to access the domain directory. If the Windows Internet Agent needs to log in to a Windows server, provide a Windows username and password. If the Windows Internet Agent needs to log in to a NetWare server, provide an existing eDirectory username and password, or create a new account for the agents. GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 9: Windows Service Information, record the account the Internet Agent will run under, and if necessary, the password for the account. As with all Windows services, the Windows Internet Agent can be started automatically or manually as a service each time the Windows server restarts. GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 9: Windows Service Information, mark how you want the Windows Internet Agent to start each time the server is restarted. Using SNMP Traps to Monitor the Windows Internet Agent If you want to use an SNMP manager program, such as the Management and Monitoring Services component of Novell ZENworks Server Management, to monitor the Windows Internet Agent, you must install some SNMP components along with the Internet Agent software. GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 2: Installation Options, mark Install and Configure SNMP for GroupWise Agents if you want to use an SNMP manager program. If this option is dimmed during installation, the SNMP service has not been enabled on the Windows server where you are installing the agents. If you want to monitor the agents from an SNMP management program, the SNMP service must be enabled so you can select this option. NOTE: The NetWare and Linux Internet Agents rely on operating system components for SNMP functionality and do not require this installation option. Enabling the Internet Agent Web Console The Internet Agent console enables you to monitor the Internet Agent from the server where it is running. If you want, you can enable the Internet Agent’s Web console. The Web console lets you view the Internet Agent’s statistical and diagnostic information through a Web browser, which is useful if want to see the Internet Agent’s activity without physically visiting the agent’s server. You access the Web console by entering the Internet Agent’s network address and HTTP port number in a Web browser (for example, http://172.16.5.18:7211). Ifnecessary, you can change the Internet Agent’s default HTTP port number (9850). Installing the GroupWise Internet Agent 81 If you want to restrict access to the Web console, you can assign a username and password. This can be any username and password you want. By default, the username and password are passed through an unsecure connection between the Web browser and the Internet Agent. Therefore, we recommend that you do not use an existing eDirectory or Windows username and password unless you secure this connection using SSL. For information about securing the Internet Agent’s connections, see “Internet Agent” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 3: Web Console Information, select Yes if you want to enable the Web console. If you want to restrict access to the Web console, enter a username and password. Gathering LDAP Information (Linux Only) If you are installing the Linux Internet Agent, the Installation Advisor needs to access eDirectory through LDAP. eDirectory access is required in order to create the Internet Agent object. To obtain access, the Installation Advisor needs the IP address and port number of an LDAP server, along with a username and password to log in with. Because the Linux Installation Advisor uses LDAP to access eDirectory, you must provide the username in LDAP format. For example: cn=admin,ou=users,o=corporate If you want to secure the connection to eDirectory with SSL, you can specify a certificate file. For background information about SSL, see “Encryption and Certificates” in “Security” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). GROUPWISE INTERNET AGENT INSTALLATION WORKSHEET Under Item 8: LDAP Information, specify the IP address and port number of an LDAP server, a username in LDAP format, the password for the username, and if necessary, the full path to your SSL certificate file. Setting Up the Internet Agent Complete the following tasks to set up the Internet Agent: + “Installing the Internet Agent” on page 86 + “Assigning a Postmaster” on page 89 + “Starting the Internet Agent” on page 90 ¢ “Testing the Internet Agent” on page 94 Installing the Internet Agent 82 As you install the Internet Agent, you are prompted to supply configuration information. Use the “Group Wise Internet Agent Installation Worksheet” on page 95 to understand the prompts and to record your installation and configuration information. + “Installing the Internet Agent Software on NetWare or Windows” on page 87 + “Installing the Internet Agent Software on Linux” on page 88 GroupWise 6.5 Installation Guide Installing the Internet Agent Software on NetWare or Windows The Internet Agent Installation program does the following: + Installs Internet Agent files to the local server and to the domain directory. ¢ Tests the server you are installing to for correct Internet configuration. + Creates the Internet Agent object in Novell eDirectory. * Configures startup files for the Internet Agent. To install the Internet Agent: 1 Make sure the server from which you will perform the installation has the Novell Client™ installed. The Internet Agent Installation program creates GroupWise objects in eDirectory. The Novell Client is required to access eDirectory. Ifnecessary, you can download the Novell Client from the Novell Product Downloads site (http://download.novell.com). 2 Make sure you have the appropriate file system and eDirectory access rights. 2a If you are installing the NetWare Internet Agent, on the Windows workstation from which you will install the Internet Agent to the NetWare server, make sure you have the following file system and eDirectory access rights: + You must be attached to the NetWare server where you will install the Internet Agent files. By default, the Internet Agent Installation program copies files to the sys:\system directory. You can specify a different directory if desired. Make sure you have rights to whichever directory you plan to install the files to. You must be attached to the server where the domain directory resides. The Internet Agent Installation program creates domain subdirectories and copies Internet Agent files to the subdirectories. This reguires full file system rights to the domain directory. You must be logged in to eDirectory with Admin-eguivalent rights to the eDirectory tree where the Group Wise Domain object resides. The Internet Agent Installation program creates an Internet Agent object under the Domain object. 2b If you are installing the Windows Internet Agent, on the Windows server where you will install the Internet Agent, make sure you have the following file system and eDirectory access rights: + You must be logged into the Windows server through a Windows user account that provides full local system access. The Internet Agent Installation program creates local directories and copies Internet Agent files to the directories. You must be logged in to the server where the domain directory resides. The Internet Agent Installation program creates domain subdirectories and copies Internet Agent files to the subdirectories. This reguires full file system rights to the domain directory. You must be logged in to eDirectory with Admin-eguivalent rights to the eDirectory tree where the Group Wise Domain object resides. The Internet Agent Installation program creates an Internet Agent object under the Domain object. 3 Insert the GroupWise 6.5 Administrator CD into the CD drive. or If you have already copied the Internet Agent files to the GroupWise software distribution directory, you can run the Internet Agent Installation program from that directory. Installing the GroupWise Internet Agent 83 4 Click Start, click Run, type the path or browse to install.exe, then click OK. CD Path: d:\internet\gwia\install.exe Directory Path: z:\grpwise\software\internet\gwia\install.exe 5 Follow the prompts, using the information from the “Group Wise Internet Agent Installation Worksheet” on page 95. 6 Continue with “Assigning a Postmaster” on page 89. Installing the Internet Agent Software on Linux As you install the Internet Agent, you are prompted to supply configuration information. Use the “Group Wise Internet Agent Installation Worksheet” on page 95 to understand the prompts and to record your installation and configuration information. + “Installing the Internet Agent” on page 88 * “Configuring the Internet Agent” on page 88 Installing the Internet Agent 1 Make sure you have set up a basic GroupWise test system, described in Chapter 3, “Installing a Basic Group Wise System,” on page 23. 2 Make sure that LDAP is running on your eDirectory server and that it is configured to accept login from the Internet Agent Installation program (worksheet item 8). The Installation Advisor requires eDirectory access in order to create the Internet Agent object in eDirectory. The Installation Advisor uses LDAP to gain the required access. 3 Open a new terminal window, then enter the following command: xhost + localhost If you cannot execute this command because the X Window System is not running on the Linux server, see “Installing the GroupWise Agents Using the Text-Based Installation Advisor” on page 167, which describes the process for the POA and the MTA. In the same window, become root by entering su and the root password. Change to the root of GroupWise 6.5 for Linux Administrator CD. Enter ./install. Nn © a A Select the language in which you want to run the Installation Advisor and install the Internet Agent software, then click OK. 8 In the Installation Advisor, click Install Products > GroupWise Internet Agent > Install Group Wise Internet Agent. The GroupWise Internet Agent executable (gwia) is installed to the /opt/novell/groupwise/ agents/bin directory. 9 When the installation is complete, click OK. 10 Continue with Configuring the Internet Agent. Configuring the Internet Agent 1 After the Internet Agent files have been installed, click Configure Internet Agent. The Internet Agent installation and configuration steps are separate so that you can install updated agent software without needing to repeat the agent configuration steps. 84 GroupWise 6.5 Installation Guide GroupWise Internet Agent Configuration = = Introduction L] introduction Welcome to the GroupWise Internet Agent Configuration Program. This g program will do the following: O e Create the GroupWise Internet Agent object in eDirectory q e Configure startup files for GroupWise Internet Agent Li E E (4 Li Cancel Next 2 Review the Introduction, then click Next. 3 Accept the License Agreement, then click Next. 4 Specify the fully qualified DNS hostname of the Linux server where you are installing the Internet Agent, then click Next. 5 Select how you want the Internet Agent to handle outbound mail (worksheet item 4), then click Next. 6 Specify the hostname portion of your Internet mail domain name (worksheet item 7), then click Next. If you do not know your Internet Main domain name yet, select Enter from ConsoleOne so that you can provide this information later. 7 Browse to and select the domain directory of the domain where you are installing the Internet Agent (worksheet item 5), then click Next. 8 Fill in the LDAP information (worksheet item 8), then click Next. 9 Fill in the Internet Agent object information (worksheet items 5 and 6), then click Next. On the Configuration Complete page, Launch Internet Agent on System Startup is selected by default. 10 Ifyou do not want the Internet Agent to start automatically when the server restarts, deselect Launch Internet Agent on System Startup. 11 Click Exit to complete the configuration. 12 Continue with Assigning a Postmaster. Assigning a Postmaster The Internet requires each site to assign at least one user to be the Postmaster. The Postmaster is assigned to be the recipient of messages addressed to postmaster@host. To assign a Postmaster: 1 In ConsoleOne, right-click the Internet Agent object, click Properties, click the GroupWise tab, then click the Gateway Administrators page. 2 On the Gateway Administrators page, click Add, select a GroupWise user to be the Postmaster, then click OK. 3 Select the user from the list, then click Postmaster. Installing the GroupWise Internet Agent 85 4 Click OK to save the information. 5 Continue with Starting the Internet Agent. The Internet Agent can also be configured to send problem messages to the Postmaster. For instructions, see “Determining What to Do with Undeliverable Messages” in “Internet Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Starting the Internet Agent After you’ ve installed the Internet Agent and configured a Postmaster, you can start the Internet Agent. * “Starting the Internet Agent on NetWare” on page 90 + “Starting the Internet Agent on Linux” on page 91 ¢ “Starting the Internet Agent on Windows” on page 94 Starting the Internet Agent on NetWare During installation, the Internet Agent Installation program copied the gwia.ncf startup file to the sys:\system directory (unless you specified a different directory). You use this file to load the Internet Agent. If you chose to have the Internet Agent Installation program add the gwia.ncf command to your autoexec.ncf, the Internet Agent loads when you start the file server. To manually start the Internet Agent: 1 At the NetWare server console, enter gwia to run the gwia.ncf file. After you have started the Internet Agent, verify that the program is running. You can monitor the program at the Internet Agent server console that displays on the NetWare server console. Press F10-Options, then press F9-Stats. If you see an error message in the Statistics window, the program has not loaded properly. If you need to stop the Internet Agent, press F7-Exit at the Internet Agent console or enter unload gwia at the NetWare server console. 2 Ifyou enabled the Internet Agent Web console, use the following URL in a Web browser to log into the Internet Agent Web console: http://internet_agent_network_address:http_port For example: http://172.16.5.18:9850 3 Continue with “Testing the Internet Agent” on page 94. Starting the Internet Agent on Linux Complete the following tasks to set up the Linux Internet Agent. These tasks are designed to help you get the Internet Agent up and running as quickly as possible and to help you manage the Internet Agent in the future. ¢ “Starting the Linux Internet Agent with a User Interface” on page 91 ¢ “Starting the Linux Internet Agent as a Daemon” on page 92 * “Monitoring the Linux Internet Agent from Your Web Browser” on page 92 86 GroupWise 6.5 Installation Guide + + “Starting the Linux Internet Agent on System Startup” on page 93 “Stopping the Linux Internet Agent” on page 93 Starting the Linux Internet Agent with a User Interface 1 og Aa If Sendmail, Postfix, or any other SMTP daemon is enabled on your Linux server, disable it before starting the Internet Agent. If you want to use the Internet Agent for POP3 and IMAP4 mail, make sure no POP3 or IMAP4 daemons are running on your Linux server. Make sure you are logged in as root. Make sure that the MTA for the domain is running. Change to the /opt/novell/groupwise/agents/bin directory. Enter the following command to start the Internet Agent: ./gwia --show @../share/gwia.cfg & The --show switch starts the Internet Agent with an agent console interface similar to that provided for the NetWare and Windows Internet Agent. This user interface requires that the X Window System and OpenMotif be running on the Linux server. The @ startup switch points to the Internet Agent configuration file and is required to start the Internet Agent. The ampersand (&) causes the Internet Agent to run in the background, so that the terminal window you started it in is again available for use. dà GroupWise Internet Agent File Configuration Log Statistics Message Statistics Processing Out 10 Minutes Groupllise serali 0 Status Passthrough Program Idle Convert Errors Other Link Communication Errors Total Bytes Log Level Time Zone= MST GHT Offset= -7 hours, 0 minutes Hemisphere= NORTH Daylight Saving Change= 1 hours, 9 minutes Daylight Saving Begin= 4/4 (month/day) Daylight Saving End= 10/31 (month/day) SNMP On Startup Switches= -show /home=/gusystem/provo3/wpgate/g wia /dhome=/gusystem/provo3/upgate/quia ¿smtp /pop3 / imap4 /ldap /mime /http /mudas=2 /mailview=internet / sd=8 /rd=16 /p=10 /te=2 /tg=5 /te=5 /tr=5 /td=3 /tt=1 0 /pt=10 /it=10 /ldapthrd 10 /st=4 /rt=4 /ari=never / attachmsg /dsn /dsnage=4 ¿hn=jboogaard-1nx,provo,nove 11,comnow End Configuration Information 200 0 300 0 300 0 100 0 100 0 300 0 700 0 300 0 300 0 700 0 300 0 300 0 300 0 200 0 300 0 The status messages displayed on the Internet Agent console are also written to the Internet Agent log file (mmddlog.nnn) in the /var/log/novell/groupwise/domain.gwia directory. The log file name includes the month and day when it was created, along with an incrementing extension to accommodate multiple log files on the same day. Starting the Linux Internet Agent as a Daemon 1 2 Make sure you are logged in as root. Change to the /etc/init.d directory. Installing the GroupWise Internet Agent 87 3 To start the Internet Agent, enter the following command: ./grpwise-ia start 4 To confirm that the Internet Agent has started, enter the following command: ps -eaf | grep gwia This lists all of the Internet Agent process IDs. Monitoring the Linux Internet Agent from Your Web Browser Before you can monitor the Linux Internet Agent from your Web browser, you must configure its HTTP port and, if desired, provide a username and password to prevent unauthorized access. 1 In ConsoleOne, right-click the WebAccess Agent object, then click Properties. 2 Click GroupWise > Network Address to display the Network Address page. 3 Inthe HTTP Port field, enter a port number. We recommend that you use port 9850 if it is not already in use on the Internet Agent’s server. By default, any user who knows the Internet Agent’s IP address (or hostname) and the HTTP port number can access the Web console. If you want to restrict Web console access, you can assign a username and password. 4 Click the GroupWise tab, then click Optional Gateway Settings to display the Optional Gateway Settings page. In the HTTP User Name field, enter an arbitrary username (for example, gwia). Click Set Password to assign a password (for example, monitor). Click OK to save your changes. On 6 GI To monitor the Internet Agent from your Web browser, view the Internet Agent Web console by supplying the IP address and port number of the Internet Agent. For example: http://172.16.5.18:9850 GroupWise 6.5.1 GWIA - Provod GWIA Status | Configuration | Environment | Log Files | Help UpTime: O Days 0 Hrs 2 Mins Message Statistics Out 10 Minutes In 10 Minutes Normal 0 0 0 0 Status 0 0 0 0 Passthrough 0 0 0 0 Conv Errors 0 0 0 0 Comm Errors 0 0 0 0 Total Bytes 0.0 0.0 SMTP Service Statistics 0 Messages Sent 0 | Messages Received Active Send Threads Active Receive Threads o Starting the Linux Internet Agent on System Startup If you selected Launch Internet Agent on System Startup in the Internet A gent Installation program, the Internet Agent Installation program configured your system so that the Internet Agent would start automatically each time you restart your server. The Internet Agent Installation Program always creates a grpwise-ia startup script in /etc/init.d for starting the Internet Agent. To enable automatic startup, the Internet Agent Installation program also creates symbolic links named S99grpwise-ia in the rc3.d and rc5.d directories so that the Internet Agent can load on startup into runlevel 3 or 5, depending on the configuration of your Linux system. GroupWise 6.5 Installation Guide When the grpwise-ia script runs and starts the Internet Agent, it reads the Internet Agent configuration file (gwia.cfg) in /opt/novell/groupwise/agents/share to check for configuration information provided by startup switches. Because the --show switch cannot be used in the configuration file, the Internet Agent never runs with an agent console interface when started automatically when the server restarts. Stopping the Linux Internet Agent When you use the --show startup switch to start the Internet Agent, you can stop it from the agent console. 1 Click File > Exit > Yes. When you start the Internet Agent with the grpwise-ia script, you can also use the script to stop it. 1 Make sure you are logged in as root. 2 Change to the /etc/init.d directory. 3 To stop the Internet Agent, enter the following command: ./grpwise-ia stop 4 To confirm that the Internet Agent has stopped, enter the following command: ps -eaf | grep gwia The only gwia process ID you should see listed is the one for the grep command When you start the Internet Agent manually (without using the grpwise-ia script), use the standard Linux kill command to stop it. 1 Make sure you are logged in as root. 2 Determine the process ID (PID) of the Internet Agent: ps -eaf | grep gwia The PIDs for all gwia processes are listed. 3 Kill the first gwia process in the list: Syntax: kill PID Example: kill 1483 It might take a few seconds for all gwia processes to terminate. 4 Repeat the ps command to verify that the Internet Agent has stopped. Starting the Internet Agent on Windows 1 Ifthe domain directory is not on the Internet Agent’s server, make sure you are logged in at the server through the user accounts (both Windows and eDirectory) that provide the Internet Agent with access to the domain directory. 2 Ifthe Internet Agent isn’t installed as a Windows service, click the Start menu > Programs > Group Wise Internet Agent > GroupWise Internet Agent. or If the Internet Agent is installed as a Windows service, open the Services window (from the Control Panel or Administrative Tools), right-click the GWIA service, then click Start. Installing the GroupWise Internet Agent 89 4 If you need to stop the Internet Agent and it is running as an application in its own window, click File > Exit. If it is running as a Windows service, open the Services window, right-click the GWIA service, then click Stop. If you enabled the Internet Agent Web console, use the following URL to log into the Web console: http://internet_agent_network_address:http_port For example: http://172.16.5.18:9850 Continue with Testing the Internet Agent. Testing the Internet Agent After you’ ve started the Internet Agent, you should send a message to ensure that the system is working properly. To send a message: 1 2 What’s Next 90 Open a new mail message in your GroupWise client. In the To field, enter your Internet address using the following syntax: internet agent:"userohost" where internet agentis the Internet Agent’s name. For example: gwia:"rcollins@novell.com" Send the message and check your mailbox to verify that you receive it. Continue with What’s Next. The “Internet Agent” section of the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65) provides information to help you further configure and maintain the Internet Agent, including how to: + Configure addressing options. By default, your GroupWise system is set up to use the standard Group Wise address format (user ID.post office.domain). This requires your users to enter Internet addresses in the following format: internet agent:"user(d)host". You can configure your Group Wise system to use Internet-style address format (user@host) rather than the standard Group Wise address format. Optimize configuration settings for the SMTP/MIME, IMAP, POP, and LDAP services. Use SSL to secure connections between the Internet Agent and other SMTP hosts, POP/IMAP clients, and the Internet Agent Web console. Control users’ access to SMTP/MIME (inbound and outbound), IMAP, and POP services. Control logging for the Internet Agent. Change the Internet Agent’s links to post offices. GroupWise 6.5 Installation Guide GroupWise Internet Agent Installation Worksheet The following table lists the information you are prompted to provide as you complete the Internet Agent installation Item 1) Software Platform * NetWare * Linux + Windows 2) Installation Options Path: NetWare Options: * Update AUTOEXEC File + Configure Internet Agent for Clustering Windows Options: * Install and Configure SNMP for GroupWise Agents + Install as Windows Service 3) Web Console Information Enable: Yes | No + Username: + Password: + HTTP Port: 9850 (default) 4) Relay Host * Send Outbound Mail Directly to Internet Hosts or * Send Outbound Mail through a Relay Host IP address: Explanation Select the type of server where you will install the Internet Agent. For more information, see “Selecting the Internet Agent Platform” on page 82. Specify the server path where you want the Internet Agent files installed. For more information, see “Selecting the Internet Agent Installation Directory” on page 82. If you selected NetWare as the Internet Agent's platform under item 1, you have the following NetWare options: + Update AUTOEXEC File: Select this option to add the Internet Agent startup command to the server's autoexec.ncf file. + Configure Internet Agent for Clustering: Select this option if you are using Novell Cluster Services. For more information, see “Clustering the NetWare Internet Agent” on page 84. If you selected Windows as the Internet Agent's platform under item 1, you have the following Windows options: + Install and Configure SNMP for GroupWise Agents: This option is available only if the SNMP service is enabled on the Windows server. Select this option to install the files required for SNMP monitoring of the Internet Agent. + Install as Windows Service: Select this option to install the Internet Agent as a Windows service rather than a Windows application. For more information, see “Configuring the Windows Internet Agent” on page 84. Specify whether or not you want to enable the Internet Agent's Web console. The Web console allows you to monitor the operation of the agent through a Web browser. For more information, see “Enabling the Internet Agent Web Console” on page 85. Mark how you want the Internet Agent to handle outbound messages from GroupWise users to Internet users. For more information, see “Handling Outbound Mail” on page 83. Installing the GroupWise Internet Agent 91 Item 5) GroupWise Domain + Domain Name: + Domain Directory: + Subdirectory: + eDirectory Context: 6) GroupWise Internet Agent Name 7) Internet Mail Domain Name 8) LDAP Information + LDAP Server IP Address: * LDAP Server Port: * Username in LDAP Format: + Password: * SSL Certificate 9) Windows Service Information * Use Local System Account Allow Service to Interact with Desktop: Yes | No * Use this Windows User Account Name: Password: + Startup Type: Automatic | Manual | Disabled Explanation Specify the domain name and the domain directory where you want to create a subdirectory for the Internet Agent. If the domain directory is located on Linux, specify the eDirectory context of the Domain object. On Linux, specify the eDirectory context of the Domain object. For more information, see “Gathering Domain and Gateway Information” on page 83. Specify a name for the GroupWise Gateway object that will be created in eDirectory to represent the Internet Agent. For more information, see “Selecting the Gateway Object Name” on page 83. Specify the Internet domain name assigned to your GroupWise system. For more information, see “Specifying the Internet Mail Domain Name for Your GroupWise System” on page 83. This item applies to the Linux Internet Agent only. List the IP address and port of an LDAP server in your system and the username and password that the Installation Advisor can use to log in to eDirectory to create the Internet Agent object. If you want to use an SSL connection, specify an SSL certificate file. For more information, see “Gathering LDAP Information (Linux Only)” on page 86. This information applies only if you are installing the Internet Agent as a Windows service. Indicate how you want the Internet Agent to access the domain directory specified under item 5. For more information, see “Configuring the Windows Internet Agent as a Service” on page 84. 92 GroupWise 6.5 Installation Guide Installing GroupWise WebAccess Novell® GroupWise® WebAccess enables access to GroupWise mailboxes through computer Web browsers, WAP-enabled wireless telephones, Palm OS devices, and Windows CE devices. The following sections provide information to help you successfully install the GroupWise WebAccess (including GroupWise WebPublisher if desired) in your existing GroupWise system. + “GroupWise WebAccess Overview” on page 99 * “WebAccess System Requirements” on page 103 * “Planning GroupWise WebAccess” on page 104 * “Setting Up GroupWise WebAccess” on page 112 * “What's Next” on page 128 + “GroupWise WebAccess Installation Worksheet” on page 129 GroupWise WebAccess Overview * “GroupWise WebAccess Introduction” on page 99 + “GroupWise WebAccess Components” on page 100 * “One WebAccess Server vs. Two” on page 100 * “WebAccess Security Requirements” on page 101 + “Novell Cluster Services” on page 102 GroupWise WebAccess Introduction GroupWise WebAccess, when used on a computer’s Web browser, provides most of the functionality available in the GroupWise client for Windows. For information about tasks that can be completed using GroupWise WebAccess, see the GroupWise WebAccess Help after installation. GroupWise WebAccess functionality on wireless devices or PDAs might be limited in comparison to the GroupWise client for Windows. GroupWise WebAccess also includes GroupWise WebPublisher, an optional extension to GroupWise WebAccess. Group Wise WebPublisher lets GroupWise users publish documents from a GroupWise library to the Web. Web users can then view the published documents in their Web browsers. Installing GroupWise WebAccess 93 GroupWise WebAccess © Mailbox GroupWise Library WebPublisher Documents No Login A Internet Intranet As shown above, GroupWise WebAccess requires users to have a mailbox in a GroupWise post office. GroupWise WebPublisher, on the other hand, is designed to provide public access to Group Wise library documents; users do not require a mailbox. After you’ ve finished setting up GroupWise WebAccess, you should look at “What's Next” on page 128 for additional information you might want to be aware of as you configure, maintain, and expand GroupWise WebAccess. NOTE: If you plan to install GroupWise WebAccess in a clustered server environment provided by Novell Cluster Services™ or Microsoft Clustering Services, see the GroupWise 6.5 Interoperability Guide (http:// www.novell.com/documentation/gw65) for additional information. GroupWise WebAccess Components GroupWise WebAccess consists of three components: the WebAccess Application, the WebPublisher Application, and the WebAccess Agent. Browser Server Agent === En Application WebAccess Application: The WebAccess Application, which resides on the Web server, provides the WebAccess user interface. As users perform actions in WebAccess, the WebAccess Application passes information between the Web browser and the WebAccess Agent. Post Office WebPublisher Application: The WebPublisher Application, which resides on the Web server, provides the WebPublisher user interface. As users perform actions in WebPublisher, the WebPublisher Application passes information between the Web browser and the WebAccess Agent. WebAccess Agent: The WebAccess Agent receives user requests from the WebAccess Application and WebPublisher Application, accesses post offices and libraries to process the requests, and then passes information back to the applications. The WebAccess Agent is required for both WebAccess and WebPublisher. The WebAccess Application must be installed to use WebAccess. Likewise, the WebPublisher Application must be installed to use WebPublisher. One WebAccess Server vs. Two The WebAccess Application and WebPublisher Application must be installed to a Linux, NetWare®, or Windows Web server. If desired, you can install the WebAccess Agent on the same server. 94 GroupWise 6.5 Installation Guide Web Web Browser Server WebAccess y A Application WebAccess => Post Office A AS Agent 2 : WebPublisher È —> Library A Workstation Application J GroupWise System You can also install the WebAccess Agent on a different server, as shown below. The WebAccess Agent can be run on a Linux, NetWare, or Windows server. Web Web Browser Server WebAccess y Applicati ¡ —E pplication a Post Office Agent z =Y —— WebPublisher È Library Workstation Application J GroupWise System Security, discussed in “WebAccess Security Requirements” on page 101, might also determine whether you run the WebAccess Agent on the same server as the Web server. WebAccess Security Requirements GroupWise WebAccess can be configured to support the level of security you have established for your Internet/intranet communication. If you are not concerned about security issues (for example, you only plan to use WebAccess on a secured intranet), you can install the WebAccess components to any servers that provide access for your users and meet the requirements (see “WebAccess System Requirements” on page 103). If you plan to use WebAccess to provide users with access to their mailboxes from anywhere on the Internet (rather than simply within a secured intranet), and you already have a firewall in place to provide security, you have the following options for configuring WebAccess: + Install all WebAccess components inside your firewall and use a proxy service. See “Configuration Using a Proxy Service” on page 101. This is the recommended configuration. ¢ Install the WebAccess and WebPublisher Applications on a Web server outside your firewall and the WebAccess Agent on a server inside your firewall. See “Configuration Without a Proxy Service” on page 102. Configuration Using a Proxy Service If your firewall includes a proxy service, you can install the WebAccess Application and WebPublisher Application to a Web server inside your firewall, and the WebAccess Agent to another server inside the firewall, as shown in the following illustration. a GroupWise Firewall Server Web Server Network Server Svstem with Proxy with WebAccess with WebAccess ¥ Internet Service and WebPublisher Agent Applications If desired, the WebAccess Agent can also be installed to the Web server rather than a separate server, as discussed in “One WebAccess Server vs. Two” on page 100. Installing GroupWise WebAccess 95 Configuration Without a Proxy Service If your firewall does not provide a proxy service, you need to install the WebAccess Application and WebPublisher Application to a Web server that is outside the firewall. Because the WebAccess Agent requires direct access (mapped path or UNC path) to a GroupWise domain directory, it needs to be installed to a server that is located within the firewall. GroupWise Web Server Firewall Network Server System with WebAccess Server with WebAccess Internet and WebPublisher Agent Applications The firewall must allow inbound IP packets to be sent from the Web server to the IP address and port number of the WebAccess Agent (for example, 172.16.5.18:7205). In addition, the firewall must allow outbound IP packets to be sent from the WebAccess Agent to the Web server. This requires all high ports (above 1023) to be open to outbound IP packets. Novell Cluster Services Novell Cluster Services is a server clustering system that ensures high availability and manageability of critical network resources including volumes (where GroupWise domains and post offices reside) and applications (such as the GroupWise WebAccess Agent). Novell Cluster Services supports failover, failback, and migration of individually managed cluster resources. The NetWare WebAccess Agent can be configured to take advantage of the fault-tolerant environment provided by Novell Cluster Services if the following requirements are met: * The domains and post offices to be serviced by the NetWare WebAccess Agent have already been created on shared NSS volumes in the cluster. * The NetWare WebAccess Agent is being installed to a server that is part of the same cluster. When the WebAccess Agent is configured for clustering, its startup file is configured with shared volume names rather than specific server names. For more information, see “Novell Cluster Services” in the GroupWise 6.5 Interoperability Guide (http://www.novell.com/documentation/gw65). WebAccess System Requirements 96 A GroupWise 6.5 system: The GroupWise 6.5 WebAccess Agent can only access GroupWise 6.5 post offices and libraries O 32-bit/x86 processor O Any of the following server operating systems: * NetWare 4.2, 5.1, or 6.x With NetWare 5.1 and 6.x, the WebAccess Agent can run on multi-processor servers and clustered servers. GroupWise 6.5 Installation Guide + SUSE? Linux Standard Server 8, SUSE Linux Enterprise Server 8, SUSE Linux Enterprise Server 9, Red Hat Enterprise Linux 3 ES, or Red Hat Enterprise Linux AS * Windows NT Server, Windows 2000 server, or Windows 2003 Server, plus the latest Service Pack for your version of Windows With Windows NT and 2000, the WebAccess Agent can run as either a Windows application or a Windows service. O Any of the following Web servers and Java* servlet engines: * NetWare 4.2/5.1 (latest Support Pack required): NetWare Enterprise Web Server with the Novell Servlet Gateway + NetWare 6.x: Enterprise Web Server or Apache Web Server, with the Tomcat 3.3 servlet engine + NetWare 6.5 with Group Wise 6.5 Support Pack 1 or later: Apache 2 Web Server with the Tomecat 4 servlet engine + Linux: Apache 2 with the Tomcat 4 servlet engine The Apache 2 Web server, Java SDK, Tomcat 4 servlet engine, and Jakarta connector can be installed and configured on your Linux server when you install the WebAccess Application (and WebPublisher Application). If desired, you can use existing installations of these components instead. * Windows NT (latest Service Pack required): Microsoft Internet Information Server 4.0 or Netscape Enterprise Server 3.6 or later, either with the Novell Servlet Gateway + Windows 2000: Microsoft Internet Information Server 5 or later with the Novell Servlet Gateway * UNIX Solaris: Apache Web Server 1.3.3 or later with the Tomcat servlet engine For assistance with using WebAccess with an unlisted Web server, see “Unsupported Web Servers” in the GroupWise 6.5 Interoperability Guide. O Java Virtual Machine (JVM*) 1.4.2 or later Keep in mind the following platform-specific details: NetWare servers can run only one JVM. On NetWare, WebAccess requires JVM 1.3.1 or later. During installation, you might be prompted to replace your current version with the WebAccess version; you should only do so if the server’s current version is older than the WebAccess version. * Linux servers require J2SDK 1.4.2 and Jakarta Connector 1.2.3 in addition to the JVM. The JVM and the additional Java components can be installed when you install WebAccess on Linux, or you can integrate WebAccess into an existing Java installation. + Windows servers can run multiple JVMs at the same time. To ensure compatibility with WebAccess, you should install JVM 1.3.1 or higher. JVM 1.4.1 (Java 2 Runtime Environment, Standard Edition Version 1.4.1) is included with WebAccess. + A JVM is not included for UNIX Solaris. You will need to separately install JVM 1.3.1 or higher to your UNIX Web server. We recommend the newest version available. O Any of the following Web browsers: * Linux: Mozilla 1.4 or later and comparable Mozilla-based browsers * Windows: Microsoft Internet Explorer 4.0 or later; Netscape Navigator 4.0 or later Installing GroupWise WebAccess 97 * Macintosh: Safari 1.0 or later; Microsoft Internet Explorer 4.5 or later; Netscape Navigator 4.51 or later * UNIX: Netscape 4.0 or later; Microsoft Internet Explorer 4.0 or later O Any of the following wireless devices: * Any wireless device that supports the Wireless Access Protocol (WAP) and has a microbrowser that uses Handheld Device Markup Language (HDML) 3.0 or later or Wireless Markup Language (WML) 1.1 or later * A Palm OS device with any Palm OS version that supports Web Clipping Applications (PQAs) * A Windows CE device with any Windows CE version Planning GroupWise WebAccess Before installing GroupWise WebAccess, you should complete the planning tasks listed below. The planning tasks help you gather information you will need as you install and set up Group Wise WebAccess. You can use the “GroupWise WebAccess Installation Worksheet” on page 129 to record your installation and setup information. * “Deciding Where to Install the GroupWise WebAccess Components” on page 104 * “Determining the WebAccess Agent’s Configuration” on page 105 * “Determining the WebAccess and WebPublisher Applications’ Configuration” on page 110 Deciding Where to Install the GroupWise WebAccess Components 98 After reviewing “GroupWise WebAccess Overview” on page 99 and the system requirements listed in “WebAccess System Requirements” on page 103, plan where you want to install the WebAccess components in your system. After you’ve selected the servers where you will install the WebAccess components, you need to make sure they meet the reguirements listed below. GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 2: Server Platform and Installation Directory, specify the platform where you will install the WebAccess Agent, then specify the directory where you want to install the WebAccess Agent files. The default NetWare directory is sys:\system. The default Linux directory is /opt/novell/ groupwise/agents/bin. The default Windows directory is c:\webacc. If you are installing the WebAccess Agent on a NetWare server that is using Novell Cluster Services, under Item 4: Clustering Support, select Yes. Under Item 13: Web Server Type and Root Directory, select the type of Web server where you will install the WebAccess Application and WebPublisher Application, then specify the Web server’s root directory. Under Item 17: Novell Root Directory, specify a directory on the Web server where you want to install the configuration files for the WebAccess Application and WebPublisher Application. Under Item 18: Java Servlet Engine, if you are installing to a NetWare or Windows server, select whether you want to use the Novell Servlet Gateway, the Tomcat servlet engine, or another Java servlet engine. If you use the Tomcat servlet engine or another Java servlet engine, it must already be installed and you must specify the path to its root directory. (If you are installing to a Linux server, the Apache 2 Web server, Java SDK, Tomcat 4 servlet engine, and Jakarta connector are all installed and configured when you install the WebAccess Application and WebPublisher Application, so you do not need to make this selection.) GroupWise 6.5 Installation Guide Determining the WebAccess Agent’s Configuration As you install the WebAccess Agent, you are prompted to supply the configuration information described in the following sections: * “Network Address” on page 105 * “Gateway Directory Location and Name” on page 106 * “Gateway Object Name” on page 106 * “Domain and Post Office Access” on page 106 * “Windows Options” on page 108 + “Web Console” on page 108 + “LDAP Information (Linux Only)” on page 109 + “WebPublisher” on page 109 Network Address The WebAccess Agent communicates with the WebAccess Application and WebPublisher Application (on the Web server) through TCP/IP. GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 3: Server Address, specify the IP address or DNS hostname of the WebAccess Agent's server, then specify the port number for the agent to use. The default is 7205. Gateway Directory Location and Name The WebAccess Agent requires a GroupWise gateway directory in which to store configuration information and work files. The gateway directory must be located under a GroupWise domain directory. The default directory name is WEBAC65A on NetWare and Windows, webacc65a on Linux. If you change the name on NetWare, use a maximum of 8 characters in the new name. If you change the name on Linux, use lowercase letters. After you specify the domain directory location and a gateway directory name, the WebAccess Installation program creates the gateway directory under the domain\wpgate directory (for example, provo\wpgate\webac65a on NetWare and Windows, provo/wpgate/webacc65a on Linux). GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 5: Gateway Directory, specify the domain name and the full path to the domain directory where you want to create the gateway directory, then give the gateway directory a name. If you are installing the Linux WebAccess Agent, record the eDirectory™ context of the Domain object (for example, cn=provo3,ou=groupwise,o=corporate). Gateway Object Name The WebAccess Agent also requires a GroupWise Gateway object in Novell eDirectory. This object stores the WebAccess Agent’s information and enables configuration of the agent through ConsoleOne®. Installing GroupWise WebAccess 99 The WebAccess Agent’s object is created below the Domain object. If you have multiple domains, the WebAccess Installation program uses the Domain object associated with the domain directory where you are creating the WebAccess Agent’s gateway directory. GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 6: Gateway Object, specify the name you want to give the WebAccess Agent's object. The default name is the same as the gateway directory name you chose for Item 5. Domain and Post Office Access The WebAccess Agent requires access to the domain. It also requires access to each post office where mailboxes or libraries are located that WebAccess or WebPublisher users will access. Domain: The WebAccess Agent needs direct access (mapped drive, UNC path, or file system mount) to the domain directory. Post Offices: The WebAccess Agent needs direct access (mapped drive, UNC path, or file system mount) to the post office directory or client/server access (TCP/IP) to the post office’s POA. By default, the WebAccess Agent uses whatever access mode has been established for the post office (ConsoleOne > Post Office object > GroupWise tab > Post Office Settings page). If you are using the NetWare or Linux versions of the WebAccess Agent, you need to ensure that an eDirectory user account exists that provides the required access to the domain and post office directories. For direct access to the domain directory or a post office directory, the WebAccess Agent needs Read, Write, Create, Erase, Modify, and File Scan rights. If you are using the Windows version of the WebAccess Agent, you need to ensure that: + + A Windows user account exists on the Windows server for the agent. If the domain or any post office directories (directly accessed by the WebAccess Agent) are on Windows servers, the Windows user account provides Full Control access to those directories. If the domain directory or any post office directories (directly accessed by the WebAccess Agent) are on NetWare servers, the WebAccess Agent has an eDirectory user account with the same username and password as the agent’s Windows user account. The eDirectory account must provide Read, Write, Create, Erase, Modify, and File Scan rights to the directories. If the WebAccess Agent does require an eDirectory user account, the context of the account is defined in the bindery context of all NetWare servers that will be accessed. GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 7: eDirectory Authentication, specify the eDirectory username and password you want the WebAccess Agent to use to access the domain directory and post office directories. This applies to the NetWare WebAccess Agent only. If you are using the Windows WebAccess Agent, ensure that the appropriate Windows and eDirectory user accounts exist. 100 GroupWise 6.5 Installation Guide Windows Options Web Console This section applies to the Windows version of the WebAccess Agent only. The Windows WebAccess Agent can be configured to support SNMP. This enables the WebAccess Agent to be monitored and managed through an SNMP management program. GROUPWISE WEBACCESS INSTALLATION WORKSHEET If you want the WebAccess Agent to support SNMP, under Item 8: Execution Options, select the Install and Configure SNMP for WebAccess Agent option. NOTE: The NetWare and Linux WebAccess Agents rely on operating system components for SNMP functionality and do not require this installation option. The WebAccess Agent can also run as a Windows service rather than a standard Windows application. To do so, the WebAccess Agent service requires a user account. The requirements for the Windows service user account are the same as those listed for the Windows WebAccess Agent in “Domain and Post Office Access” on page 106. GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 8: Execution Options, select Run WebAccess Agent as a Windows Service. Under Item 9: Windows Service User, enter the username and password for the service’s user account. The WebAccess Agent console enables you to monitor the WebAccess Agent from the server where it is running. If you want, you can enable the WebAccess Agent’s Web console. The Web console lets you view the WebAccess Agent’s statistical and diagnostic information through a Web browser, which is useful if want to see the WebAccess Agent’s activity without physically visiting the agent’s server. You access the Web console by entering the WebAccess Agent’s network address and HTTP port number in a Web browser (for example, http://172.16.5.18:7211). If necessary, you can change the WebAccess Agent’s default HTTP port number (7211). If you want to restrict access to the Web console, you can assign a username and password. This can be any username and password you want. By default, the username and password are passed through an unsecure connection between the Web browser and the WebAccess Agent. Therefore, we recommend that you do not use an existing eDirectory or Windows username and password unless you secure this connection using SSL. For information about securing the WebAccess Agent’s connections, see “WebAccess” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 10: Web Console, select Yes if you want to enable the Web console. If you want to restrict access to the Web console, enter a username and password. Installing GroupWise WebAccess 101 LDAP Information (Linux Only) WebPublisher If you are installing the Linux WebAccess Agent and WebAccess Application, the Installation Advisor needs to access eDirectory through LDAP. eDirectory access is required in order to create the WebAccess Agent and WebAccess Application objects. To obtain access, the Installation Advisor needs the IP address and port number of an LDAP server, along with a username and password to log in with. Because the Linux Installation Advisor uses LDAP to access eDirectory, you must provide the username in LDAP format. For example: cn=admin,ou=users,o=corporate If you want to secure the connection to eDirectory with SSL, you can specify a certificate file. For background information about SSL, see “Encryption and Certificates” in “Security” in the Group Wise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). If you do not want to use SSL, the LDAP server must be configured to accept clear text passwords. GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 11: LDAP Information, specify the IP address and port number of an LDAP server, a username in LDAP format, the password for the username, and if necessary, the full path to your SSL certificate file. You can choose whether or not you want the WebAccess Agent to support GroupWise WebPublisher. If you enable WebPublisher support, you need to specify a GroupWise account (mailbox ID and password). The GroupWise account serves two purposes: + GroupWise users publish documents to WebPublisher users by sharing the documents with the GroupWise account. * When Web users access WebPublisher, the WebAccess Agent logs in to this GroupWise account. This lets the WebAccess Agent know which documents have been shared with WebPublisher users. It can then retrieve these documents (and only these documents) for the WebPublisher users. We recommend that you create a new GroupWise account specifically for GroupWise WebPublisher. If you’ve already created an eDirectory account for the WebAccess Agent to use when accessing domain or post office directories (see “Domain and Post Office Access” on page 106), you might want to create the GroupWise account under that eDirectory user account. GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 12: WebPublisher Support, select Yes if you want to enable the WebAccess Agent to support WebPublisher, then enter the Mailbox ID and password for the GroupWise account you want the WebAccess Agent to use. If you enable GroupWise WebPublisher support, you need to select the libraries that you want to make public. The WebAccess Agent, acting on behalf of WebPublisher users, will only access documents in public libraries. Making a library public does not automatically give WebPublisher users access to all documents in the library. For WebPublisher users to have access to a document in a public library, the document’s owner must have shared the document with the WebPublisher user account. 102 GroupWise 6.5 Installation Guide GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 13: Libraries, list the libraries from which documents can be shared. The WebAccess Installation program will list all libraries in your GroupWise system. If you want, you can wait until then to select libraries. NOTE: When a WebPublisher user requests a library document in HTML format rather than its native format, the WebAccess Agent renders the document from its native format to HTML format. It also caches the HTML document to a directory on the agent’s local drive. This enables the WebAccess Agent to use the cached document for future requests. For NetWare, the cache directory is the sys:\system\cache directory. For Linux, the cache directory is /opt/novell/groupwise/webpublisher/cache. For Windows, the cache directory is the c:\webacc\cache directory. For information about changing the cache directory's location, size, and refresh interval, see “WebAccess” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/ gw65). Determining the WebAccess and WebPublisher Applications’ Configuration As you install the WebAccess Application and/or the WebPublisher Application to a Web server, you are prompted to supply the configuration information described in the following sections: + “Web Clipping Application (PQA) URL (NetWare and Windows WebAccess)” on page 110 * “Web Server Default Page” on page 111 * “Default Language” on page 111 * “eDirectory Objects and Configuration Files” on page 112 NOTE: You should have already selected the Web server where you will install the WebAccess Application and WebPublisher Application. If you have not, see “Deciding Where to Install the GroupWise WebAccess Components” on page 104. Web Clipping Application (PAA) URL (NetWare and Windows WebAccess) When installing to a NetWare or Windows server, the WebAccess Installation program creates a Web Clipping Application (POA), also referred to as a Palm Ouery Application, to enable Palm OS device users to log in to Group Wise WebAccess. (The Web Clipping Application is not available on Linux.) The Web Clipping Application, named groupwise.pga, includes the URL reguired to connect to your Group Wise WebAccess installation, a Login page, an About Novell Group Wise page, and the images used when displaying Group Wise WebAccess on the Palm OS device. You need to specify the URL you want used. For example: http://groupwise.novell.com The WebAccess Installation program automatically appends /servlet/webacc to the URL so that users are directed to the WebAccess login page. For example, using the URL above, the WebAccess Installation program would create the following URL in the groupwise.pga file: http://groupwise.novell.com/servlet/webacc As you determine the URL, keep in mind the following: * Ifthe Web server uses SSL, change http to https. + If you are using a proxy server, enter the proxy server’s address. Installing GroupWise WebAccess 103 * The web clipping proxy server (gateway) does not currently support challenge and response authentication. Therefore, ensure that the Web server is not configured to require basic challenge and response authentication, or at least is configured not to require this authentication for the URL defined in the groupwise.pga file. GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 14: Web Clipping Application (PQA) URL, specify the URL you want included in the groupwise.pqa file. Web Server Default Page Default Language When installing to a NetWare or Windows server, the WebAccess Installation program copies the Novell Web Services page to the Web Server’s root directory. This page includes links for Group Wise WebAccess and GroupWise WebPublisher (provided you are installing both). You can have this page replace the Web Server’s current default page, or you can retain your current page and create a link to the Novell Web Services page. This Web page is handled differently on Linux, so there is no need to replace an existing Web page on Linux. The Novell Web Services page simply provides a link to the WebAccess login page and to the WebPublisher user interface. You or your users can bypass the Novell Web Services page and go directly to WebAccess or WebPublisher by using the following URLs: NetWare/Windows: http://web_server_address/servlet/webacc Linux: http://web_server_address/gw/webacc NetWare/Windows: http://web_server_address/servlet/webpub Linux: http://web_server_address/gw/webpub where web_server_address is the IP address or DNS hostname of your Web server. If the Web server uses SSL, you’ll need to use https rather than http. If you use the Novell Web Services page as the default, the Installation program renames the current default page to filename.001 (for example, default.001 or index.001). You should change the default Web server page only if the Web server is used solely for Novell products. As you install additional Novell products, such as GroupWise Monitor, the Novell Web Services page is updated to allow access to each product. On Linux, the Novell Web Services page is located in the gw directory, so the default page for your Web server does not need to be renamed. If you retain your current default page, the Install program copies the Novell Web Services page (novell.htm) to the Web Server’s root directory. You need to add a link from your default page to the Novell Web Services page. GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 15: Web Server Default Page, select whether or not you want to use the Novell Web Services page as the Web server's default page. The WebAccess Installation program installs all available languages. You need to specify which language should be used when displaying the Novell Web Services page. When users access the Novell Web Services page, they can use the default language for WebAccess or WebPublisher, or they can select another language. 104 GroupWise 6.5 Installation Guide GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 18: Default Language, specify the language for the Novell Web Services page. eDirectory Objects and Configuration Files WebAccess Application and WebPublisher Application configuration information is stored in two places: 1) eDirectory objects and 2) the webacc.cfg and webpub.cfg files, located by default in the Web server’s novell directory (worksheet item 16). The WebAccess Application object and WebPublisher Application object allow you to easily modify configuration information in ConsoleOne. The eDirectory information is the master information; any changes made to the objects in eDirectory are also written to the configuration files. In some installation scenarios, such as installing to a Web server outside a firewall or installing to a UNIX Web server, you might not have access to eDirectory, which means the WebAccess Installation program cannot create the objects. It can, however, still create the configuration files on the Web server. In this case, to change the application’s configuration, you need to manually modify the webacc.cfg and webpub.cfg files. You need to select the eDirectory container where you want the objects created. They are all created in the same container. The default container is the Domain object, which means the objects are created beneath the Domain object (similar to GroupWise MTA and Gateway objects). NOTE: Each application also has several providers associated with it. For example, the WebAccess Application has a GroupWise Provider and an LDAP Provider. The GroupWise Provider is the component that actually communicates with the WebAccess Agent to request information for users. The LDAP Provider communicates with LDAP servers to enable users to search LDAP address books. Provider objects are created in the same location as the application objects. GROUPWISE WEBACCESS INSTALLATION WORKSHEET Under Item 19: eDirectory Object Configuration, specify the tree where you want the objects created, then specify the context. If you will be installing from a location where you don’t have access to eDirectory, you can skip this item. Setting Up GroupWise WebAccess * “Setting Up GroupWise WebAccess on NetWare or Windows” on page 112 * “Setting Up GroupWise WebAccess on Linux” on page 118 Setting Up GroupWise WebAccess on NetWare or Windows Complete the following tasks to set up GroupWise WebAccess and WebPublisher: + “Installing the WebAccess Agent” on page 113 + “Installing the WebAccess Application and WebPublisher Application” on page 114 * “Starting GroupWise WebAccess” on page 117 Installing GroupWise WebAccess 105 Installing the WebAccess Agent The following steps provide instructions for installing the WebAccess Agent. For information about installing the WebAccess and WebPublisher Applications to a Web server, see “Installing the WebAccess Application and WebPublisher Application” on page 114. 1 Make sure you install from the appropriate Windows workstation/server: + Ifyou are installing to a NetWare server, you can run the WebAccess Installation program on any Windows workstation. + Ifyou are installing to a Windows server, you must run the WebAccess Installation program on that server. 2 Make sure the Windows workstation/server from which you will perform the installation has the Novell Client™ installed. The WebAccess Installation program creates GroupWise objects in eDirectory. The Novell Client is required to access eDirectory. If necessary, you can download the Novell Client from the Novell Product Downloads site (http://download.novell.com). 3 Make sure you have the file system and eDirectory access required to install the WebAccess Agent: + You need full file system rights to the GroupWise domain directory where the WebAccess Installation program will create the WebAccess Agent’s gateway directory. See Item 5: Gateway Directory in the “GroupWise WebAccess Installation Worksheet” on page 129. + You need full file system rights to the server where the WebAccess Installation program will install the WebAccess Agent. If you are installing to a Windows server, you must run the WebAccess Installation program on that server. See Item 2: Server Platform and Installation Directory in the “GroupWise WebAccess Installation Worksheet” on page 129. * The WebAccess Installation program creates the WebAccess Agent object below the Group Wise Domain object in eDirectory. For it to do so, you must have Admin rights (or Admin equivalent rights) to the eDirectory container where the GroupWise Domain object resides. 4 Shut down any other GroupWise agents (MTA, POA, or Internet Agent) running on the server. This allows the WebAccess Installation program to properly install the agents’ common files (also referred to as the agent engine files). The WebAccess Installation program will attempt to shut down the GroupWise agents on a NetWare server. We recommend, however, that you shut down these agents yourself before starting the installation. 5 Insert the GroupWise 6.5 Administrator CD into the CD drive to start the WebAccess Installation program, click Install Products, click GroupWise WebAccess, then click Install Group Wise WebAccess. If the Installation program does not start automatically, run setup.exe from the root of the CD. or If you’ ve already copied the GroupWise WebAccess software to a software distribution directory, run internet\webacces\setup.exe. 6 Click Yes to accept the license agreement and display the GroupWise WebAccess: Components dialog box. 106 GroupWise 6.5 Installation Guide GroupWise WebAccess: Components E xi GroupWise WebAccess uses the components listed below. Novell Select the components you want to install at this time. ss "A InstallShield Components GroupWise WebAccess Agent | ] GroupWise WebAccess Application OK ] GroupWise WebPublisher Application OK Description Accesses post offices and libraries to process user requests received from the WebAccess and WebPublisher applications. Can be installed on a Netware or Windows NT/2000 server. Bac Cancel 7 Select GroupWise WebAccess Agent. Deselect the GroupWise WebAccess Application and GroupWise WebPublisher Application options. NOTE: You can also install the WebAccess Application and WebPublisher Application to your Web server at this time provided that 1) you have the appropriate Web server file system access and eDirectory access (see “Installing the WebAccess Application and WebPublisher Application” on page 114) and 2) you are running the WebAccess Installation program on that Web server, if it is a Windows Web server and you are installing the Novell Servlet Gateway. 8 Click Next, then follow the installation prompts, using the information you recorded on the “GroupWise WebAccess Installation Worksheet” on page 129. 9 Continue with Installing the WebAccess Application and WebPublisher Application. Installing the WebAccess Application and WebPublisher Application The following steps provide instructions for installing the WebAccess Application and WebPublisher Application. For information about installing the WebAccess Agent, see “Installing the WebAccess Agent” on page 113. 1 Make sure you install from the appropriate Windows workstation/server: + Ifyou are installing to a NetWare Web server, you can run the WebAccess Installation program on any Windows workstation. + Ifyou are installing to a Windows Web server, you must run the WebAccess Installation program on that server. 2 Make sure the Windows workstation/server from which you will perform the installation has the Novell Client installed. The WebAccess Installation program creates GroupWise objects in eDirectory. The Novell Client is required to access eDirectory. Ifnecessary, you can download the Novell Client from the Novell Product Downloads site (http://download.novell.com). 3 Make sure you have the file system and eDirectory access required to install the WebAccess Application and the WebPublisher Application: + You need full file system rights to the Group Wise domain directory. See Item 5: Gateway Directory in the “GroupWise WebAccess Installation Worksheet” on page 129. + You need full file system rights to the Web server. If your Web server is on a UNIX server, the WebAccess Installation program copies tar files to a location you specify; this can be the UNIX server if you have access to it from the Windows workstation where you are performing the installation, or another location from which you can then copy the tar Installing GroupWise WebAccess 107 files to the UNIX server. See Item 13: Web Server Type and Root Directory in the “GroupWise WebAccess Installation Worksheet” on page 129. + The WebAccess Installation program creates the WebAccess Application and WebPublisher Application objects (and their associated provider objects) in a container you specify (worksheet item 19). Make sure you have Admin rights (or Admin- equivalent rights) to the container. The default container is the GroupWise Domain object. 4 Shut down the JVM and the Web server. When installing the WebAccess Application and WebPublisher Application to a NetWare or Windows Web server, the WebAccess Installation program will attempt to shut down the Web server and the JVM. We recommend, however, that you manually shut down the Web server and the JVM yourself before starting the installation. 5 Insert the GroupWise 6.5 Administrator CD into the CD drive to start the WebAccess Installation program, click Install Products, click GroupWise WebAccess, then click Install Group Wise WebAccess. If the Installation program does not start automatically, run setup.exe from the root of the CD. or If you’ve already copied the GroupWise WebAccess software to a software distribution directory, run setup.exe from the internet\webacces directory. 6 Click Yes to accept the license agreement and display the GroupWise WebAccess: Components dialog box. GroupWise WebAccess: Components q xÍ GroupWise Webåccess uses the components listed below. Select the components you want to install at this time. Novell. KI SE | Components r Description 1 Communicates with a Web server and WebAccess Agent to process Webáccess users' requests. Must be installed to the Web server. Also includes Novell Speller Application. InstallShield Bac Cancel 7 Select GroupWise WebAccess Application and GroupWise WebPublisher Application (if you plan to use WebPublisher). Deselect the GroupWise WebAccess Agent option. 8 Click Next, then follow the installation prompts, using the information you recorded on the “GroupWise WebAccess Installation Worksheet” on page 129. 9 After installation is complete, you might need to do the following: + Ifyou kept your Web server’s default home page, create a link from your home page to the Novell Web Services page (novell.htm file) in the document root directory. + Ifyou chose to use an existing Java servlet engine rather than installing the Novell Servlet Gateway, modify the Java servlet engine’s servlet properties files to include the settings shown in the sample WebAccess servlet.properties file. This sample file is located in the internet\webacces\other directory on the CD. 108 GroupWise 6.5 Installation Guide + Ifyou chose to use an existing JVM on Windows rather than update to the one included with GroupWise WebAccess, edit the servletgateway.properties file and change the java.base setting to point to the existing JVM (for example, c:ydk1.1.8). The servletgateway.properties file is located the novell\java\servlets directory. + Ifyou are installing to an Apache Web server on UNIX Solaris, continue with “Completing the Installation on a UNIX Apache Web Server” on page 116. Completing the Installation on a UNIX Apache Web Server The WebAccess Installation program copies the following files to the location you specified: webaccess.tar, webaccessdocs.tar, webaccessjars.tar, webaccessservlets.tar, index.html, servlets.properties, and commgr.cfg. It also creates a palm subdirectory for the Palm Query Application (PQA) file it creates. To complete the installation and configuration process: 1 Using the tar -xvf command, extract the following tar files to the specified locations: + webaccess.tar: Extract to the root of the UNIX server. A /novell directory is created for the files. + webaccessdocs.tar: Extract to the Apache document root directory (for example, /usr/ local/apache/htdocs). + webaccessservlets.tar: Extract to the Tomcat ROOT/WEB-INF/classes directory (for example, /usr/local/tomcat/webapps/ROOT/WEB-INF/classes). + webaccessjars.tar: Extract to the Tomcat ROOT/WEB-INF/lib directory (for example, /ustr/local/tomcat/webapps/ROOT/WEB-INF/lib). 2 Modify the Tomcat web.xml file to include the following information. The web.xml file is in the Tomcat ROOT/WEB-INF directory. <web-app> <servlet> <servlet-name>webacc</servlet-name> <servlet-class>com.novell.webaccess.WebAccessServlet</servlet-class> <init-param> <param-name>Config</param-name> <param-value>/novell/webaccess/webacc.cfg</param-value> </init-param> <load-on-startup> </load-on-startup> </servlet> <servlet> <servlet-name>spellchk</servlet-name> <servlet-class>com.novell.collexion.spell.servlet.SpellServlet</servlet- class> <init-param> <param-name>Config</param-name> <param-value>/novell/webaccess/spellchk.cfg</param-value> </init-param> <load-on-startup> </load-on-startup> </servlet> <servlet> <servlet-name>webpub</servlet-name> <servlet-class>com.novell.webpublisher.WebPublisherServlet</servlet- class> Installing GroupWise WebAccess 109 <init-param> <param-name>Config</param-name> <param-value>/novell/webpublisher/webpub.cfg</param-value> </init-param> <load-on-startup> </load-on-startup> </servlet> </web-app> NOTE: If you will not use WebPublisher, do not include the webpub servlet definition. 3 Modify the webacc.cfg and webpub.cfg files, located in the /novell/webaccess and /novell/ webpublisher directories at the root of the UNIX server, to change the Templates.path setting to point to the templates. For example, change the following line in webacc.cfg: Templates.path=/java/servlets/com/novell/webaccess/templates to Templates.path=/usr/local/tomcat /webapps/ROOT/WEB-INF/classes/com/ novell/webaccess/templates 4 Copy the commgr.cfg file to the /novell/webaccess directory. If you installed Group Wise WebPublisher, you also need to copy the file to the /novell/webpublisher directory. 5 Inthe webacc.cfg file, verify that the paths for the following settings point to valid directories. Typically, these directories reside in the /novell/webaccess directory, but you can relocate them if desired. Refer to the comments in the webacc.cfg file for explanations of each of these settings. Log.path=/novell/webaccess/logs Security.Timeout.path=/novell/webaccess/users File.Upload.path=/novell/webaccess/temp Verify that the paths for the following settings are correct. Provider.GWAP.Config.file=/novell/webaccess/commgr.cfg Provider.LDAP.Config.file=/novell/webaccess/ldap.cfg 6 Inthe webpub.cfg file, verify that the paths for the following settings point to valid directories. Typically, these directories are reside in the /novell/webpublisher directory, but you can relocate them if desired. Refer to the comments in the webpub.cfg file for explanations of each of these settings. Log.path=/novell/webpublisher/logs File.Upload.path=/novell/webpublisher/temp Verify that the path for the following setting is correct. Provider.GWDOC.Config.file=/novell/webpublisher/commgr.cfg 7 Copy the index.html file to the Apache document root directory (for example, /usr/local/ apache/htdocs). You can replace your Web server’s current default home page with this file, or you can rename the file and link to it from your current default home page. Starting GroupWise WebAccess If you did not have the WebAccess Installation program start the WebAccess components, complete the following steps: 110 GroupWise 6.5 Installation Guide 1 Restart the JVM, Java servlet engine, and Web server. This loads the WebAccess Application (and WebPublisher Application if you installed it). To start the WebAccess Agent on a NetWare server, enter strtweb.ncf at the system console. or To start the WebAccess Agent as an application on a Windows server, click the Start menu > Programs > Novell GroupWise WebAccess > GroupWise WebAccess. or To start the WebAccess Agent as a service on a Windows server, open the Services window (from the Control Panel or the Administrative Tools window), right-click the WebAccess service, then click Start. If you need to stop the NetWare WebAccess Agent, press F7-Exit at the WebAccess agent console or enter stopweb and the NetWare server console. If you need to stop the Windows WebAccess Agent and it is running as an application in its own window, close the window. If it is running as a Windows service, open the Services window, right-click the WebAccess service, then click Stop. If you shut down other Group Wise agents to install the WebAccess Agent, make sure you start the agents again. Setting Up GroupWise WebAccess on Linux Complete the following tasks to set up GroupWise WebAccess and WebPublisher. These tasks are designed to help you get Linux WebAccess up and running as quickly as possible and to help you manage the WebAccess Agent in the future. + + + “Installing the Linux WebAccess Agent” on page 118 “Configuring the Linux WebAccess Agent” on page 119 “Installing and Configuring the WebAccess Application and WebPublisher Application” on page 120 “Starting the Web Server” on page 121 “Starting the Linux WebAccess Agent for the First Time” on page 121 “Monitoring the Linux WebAccess Agent from Your Web Browser” on page 122 “Starting the Linux WebAccess Agent on System Startup” on page 123 “Stopping the Linux WebAccess Agent” on page 123 “Configuring WebPublisher on Linux” on page 125 Installing the Linux WebAccess Agent 1 Make sure you have set up a basic GroupWise test system, described in Chapter 3, “Installing a Basic GroupWise System,” on page 23. 2 Make sure that LDAP is running on your eDirectory server and that it is configured to accept login from the WebAccess Agent Installation program (worksheet item 11) The Installation Advisor requires eDirectory access in order to create the WebAccess Agent object in eDirectory. The Installation Advisor uses LDAP to gain the required access. Installing GroupWise WebAccess 111 3 Open a new terminal window, then enter the following command: xhost + localhost If you cannot execute this command because the X Window System is not running on the Linux server, see “Installing the GroupWise Agents Using the Text-Based Installation Advisor” on page 167. Similar steps can be used to install the WebAccess Agent without needing the X Window System. In the same window, become root by entering su and the root password. Change to the root of the GroupWise 6.5 for Linux Administrator CD. Enter ./install. vO oF A Select the language in which you want to run the Installation Advisor and install the WebAccess software, then click Next. 8 In the Installation Advisor, click Install Products > GroupWise WebAccess > Install WebAccess Agent. The WebAccess Agent software is installed to the bin and lib subdirectories of /opt/novell/ groupwise/agents. 9 When the installation is complete, click OK. 10 Continue with Configuring the Linux WebAccess Agent. Configuring the Linux WebAccess Agent 1 After the WebAccess Agent files have been installed, click Configure WebAccess Agent. The WebAccess Agent installation and configuration steps are separate so that you can install updated agent software without needing to repeat the agent configuration steps. GroupWise WebAccess Agent Configuration Introduction L] Introduction p to the GroupWise WebAccess Agent Configuration Program g This program will do the following: o le Create the GroupWise WebAccess Agent object in eDirectory O | e Create configuration files for GroupWise WebAccess Agent Li Li Li Cancel Next 2 Review the Introduction, then click Next. 3 Accept the License Agreement, then click Next. 4 Specify the IP address or DNS hostname of the Linux server where you are installing the WebAccess Agent (worksheet item 3), then click Next. The default port number of 7205 is typically acceptable, unless another program is already using that port. 5 Browse to and select the domain directory for the domain where you are installing the WebAccess Agent (worksheet item 5), then click Next. 112 GroupWise 6.5 Installation Guide The default WebAccess Agent subdirectory (webac65a) is typically acceptable. It is created as a subdirectory of the domain/wpgate directory. 6 Fill in the LDAP information (worksheet item 11), then click Next. 7 Fill in the domain and agent information (worksheet item 6), then click Next. On the Configuration Complete page, Launch WebAccess Agent on System Startup is selected by default. 8 Ifyou do not want the WebAccess Agent to start automatically when the server restarts, deselect Launch WebAccess Agent on System Startup. 9 Click Exit to complete the configuration. 10 Continue with Installing and Configuring the WebAccess Application and WebPublisher Application. Installing and Configuring the WebAccess Application and WebPublisher Application 1 After installing and configuring the WebAccess Agent, click Install GroupWise WebAccess Application with Apache and Tomcat. This installs a version of Apache and Tomcat specifically for use with GroupWise. Apache files are installed under /var/opt/novell/http and /etc/opt/novell/http. Tomcat files are installed under /var/opt/novell/tomcat4 and /etc/opt/novell/tomcat4. In addition, a self-signed certificate is generated, enabling users to use WebAccess and WebPublisher using an SSL connection. or If you want to use an existing Apache and Tomcat installations, click Install Group Wise WebAccess Application. 2 When the installation is complete, click OK. 3 Click Configure WebAccess Application. GroupWise WebAccess Application Configuration ~ Introduction q Introduction Welcome to the GroupWise WebAccess Application Configuration o | Program. This program will do the following: o | e Create the GroupWise WebAccess objects in eDirectory O | e Configure your webserver to work with GroupWise WebAccess Li E Li Cancel Next 4 Review the Introduction, then click Next. 5 Accept the License Agreement, then click Next. 6 Browse to and select the WebAccess subdirectory (typically webac65a) under domain/wpgate (worksheet item 5). 7 Click Next to accept the default Apache and Tomcat locations that were established in Step 1. Installing GroupWise WebAccess 113 or Specify the locations of Apache and Tomcat installations on your system, then click Next. 8 Fill in the LDAP information (worksheet item 11), then click Next. 9 Browse to and select the eDirectory context where you want the WebAccess Application objects to be created. (worksheet item 19), then click Next. The GroupWise WebAccess objects are GroupWiseWebAccess, Group WiseProvider, LDAPProvider, and NovellSpeller. 10 On the Configuration Complete page, click Exit to complete the configuration. 11 Continue with Starting the Web Server. Starting the Web Server If you installed Apache and Tomcat along with the WebAccess Application, follow the instructions below to start the Web server. If you did not install Apache and Tomcat along with the WebAccess Application, restart Apache and Tomcat on your system. 1 Make sure you are logged in as root. 2 If you have other instances of Apache and Tomcat running on this server, bring them down before you start the new versions you just installed. 3 Change to the /etc/init.d directory. 4 Start Tomcat. ./novell-tomcat4 start 5 Wait until Tomcat is all the way up. 6 Start Apache. ./novell-httpd start 7 Continue with Starting the Linux WebAccess Agent for the First Time. Starting the Linux WebAccess Agent for the First Time You can choose to start the WebAccess Agent with or without a user interface. * “Starting the Linux WebAccess Agent with a User Interface” on page 121 + “Starting the Linux WebAccess Agent as a Daemon” on page 122 Starting the Linux WebAccess Agent with a User Interface 1 Make sure you are logged in as root. 2 Make sure that the MTA for the domain is running. 3 Change to the /opt/novell/groupwise/agents/bin directory. 4 To start the WebAccess Agent, enter the following command: -/gwinter --show --home domain directory/wpgate/webac65a & The WebAccess Agent --show switch does not display an agent console interface like the other GroupWise agents. Instead, WebAccess configuration and status information displays in the terminal window where you start the WebAccess Agent. 114 GroupWise 6.5 Installation Guide The --home startup switch specifies the domain directory and is required to start the WebAccess Agent. The ampersand (&) causes the WebAccess Agent to run in the background, so that the terminal window you started it in is again available for use. Æ Shell- Konsole oo x) Session Edit View Settings Help Jbd-lnx:/opt/novell/sroupwise/agents/bin + 000 09:19:14 ***** WebAccess Configuration Information ***** [000 09:19:14 [000 09:19:14 General Settings: [000 09:19:14 Agent Version: 6,5,10 [000 09:19:14 Gateway Home Directory: /susystem/provo3/upgate/WEBACGSA [000 09:19:14 Linux Release 2,4,19-4GB [000 09:19:14 SNMP: Disabled 000 09:19:14 Work Directory: ./tmpFiles [000 03:19:14 [000 03:19:14 Client/Server Settings: 000 09:19:15 IP Address: jpd-l1nx (172,16,4,95) 000 09:19:15 TCP Port for Incoming Connections; 7205 000 09:19:15 Client/Server over SSL: Disabled [000 09:19:15 HebConsole: Enabled 1000 09:19:15 HebConsole Url: http://172,16,47,95:0 000 03:19:15 [000 09:19:15 Performance Settings? 000 09:19:15 Processing Threads: 12 (Default? 000 09:19:15 Maximum users; 250 1000 09:19:15 Document Cache Settings: [000 09:19:15 Cache Path: /gusystem/provo3/wpgate/WEBAC65A 000 09:19:15 eee eee 000 09:19:15 Warning: Public Userid for WebPublisher not configured 000 09:19:15 WebAccess Server is ready for work A [Pa] «DI Status messages for the WebAccess Agent are written to the WebAccess Agent log file (mmddlog.nnn) in the /var/log/novell/groupwise/domain.webac65a directory. The log file name includes the month and day when it was created, along with an incrementing extension to accommodate multiple log files on the same day. 5 Skip to “Monitoring the Linux WebAccess Agent from Your Web Browser” on page 122. Starting the Linux WebAccess Agent as a Daemon 1 Make sure you are logged in as root. 2 Make sure that the MTA for the domain is running. 3 Change to the /etc/init.d directory. 4 To start the WebAccess Agent, enter the following command: ./grpwise-wa start 5 To confirm that the WebAccess Agent has started, enter the following command: ps -eaf | grep gwinter This lists all of the WebAccess Agent process IDs. 6 Continue with Monitoring the Linux WebAccess Agent from Your Web Browser. Monitoring the Linux WebAccess Agent from Your Web Browser Before you can monitor the Linux WebAccess Agent from your Web browser, you must configure its HTTP port and, if desired, provide a username and password to prevent unauthorized access. 1 In ConsoleOne, right-click the WebAccess Agent object, then click Properties. 2 Click GroupWise > Network Address to display the Network Address page. 3 In the HTTP Port field, enter a port number. We recommend that you use port 7211 if it is not already in use on the WebAccess Agent’s server. Installing GroupWise WebAccess 115 By default, any user who knows the WebAccess Agent’s IP address (or hostname) and the HTTP port number can use the Web console. If you want to restrict Web console access, you can assign a username and password. 4 Click GroupWise > Optional Gateway Settings to display the Optional Gateway Settings page. In the HTTP User Name field, enter an arbitrary username (for example, webacc). Click Set Password to assign a password (for example, monitor). Click OK to save your changes. On 6 GI To monitor the WebAccess Agent from your Web browser, view the WebAccess Agent Web console by supplying the IP address and port number of the WebAccess Agent. For example: http://172.16.5.18:7211 GroupWise Vi ess - WEBACE5A. Provo3 Status | Configuration | Environment | Log Files | Help Up Time: 1 Days 15 Hours 48 Minutes C/S Users 0 0 0 CIS Handler Threads 12 1 1 C/S Requests 5 CIS Requests Failed 0 Starting the Linux WebAccess Agent on System Startup Ifyou selected Launch WebAccess Agent on System Startup in the WebAccess Agent Installation program, the WebAccess Installation program configured your system so that the WebAccess Agent would start automatically each time you restart your server. The WebAccess Installation program always creates a grpwise-wa startup script in /etc/init.d for starting the WebAccess Agent. To enable automatic startup, the WebAccess Installation program also creates symbolic links named S99grpwise-wa in the rc3.d and rc5.d directories so that the WebAccess Agent can load on startup into runlevel 3 or 5, depending on the configuration of your Linux system. When the grpwise-wa script runs and starts the WebAccess Agent, it reads the WebAccess Agent configuration file (webaccess_agent_object.cfg) in /opt/novell/groupwise/agents/share to check for configuration information provided by startup switches. Because the WebAccess Agent does not have a user interface like the MTA, POA, and Internet Agent, the --show switch can be used in the configuration file. However, the information is directed to standard output, which might not be readily available to you. Stopping the Linux WebAccess Agent 116 When you start the WebAccess agent with the grpwise.wa script, you can also use the script to stop it. 1 Make sure you are logged in as root. 2 Change to the /etc/init.d directory. 3 To stop the WebAccess Agent, enter the following command: ./grpwise-wa stop GroupWise 6.5 Installation Guide 4 To confirm that the WebAccess Agent has stopped, enter the following command: ps -eaf | grep gwinter The only gwinter process ID you should see listed is the one for the grep command. When you start the WebAccess Agent manually (without using the grpwise-wa script), use the standard Linux kill command to stop it. 1 Make sure you are logged in as root. 2 Determine the process ID (PID) of the WebAccess Agent: ps -eaf | grep gwinter The PIDs for all gwinter processes are listed. 3 Kill the first gwinter process in the list: Syntax: kill PID Example: kill 1483 It might take a few seconds for all gwinter processes to terminate. 4 Repeat the ps command to verify that the WebAccess Agent has stopped. Configuring WebPublisher on Linux After installing and configuring WebAccess, as described in “Setting Up GroupWise WebAccess on Linux” on page 118, if you want to enable WebPublisher as well, you must perform some manual configuration. 1 In ConsoleOne, connect to the domain where the WebAccess Agent object was created during installation. 2 Ina convenient context, create a new user specifically for use with WebPublisher. 3 Add the new user to a post office and provide a GroupWise password for the WebPublisher user. 4 Browse to and right-click the WebAccess Agent object (by default, WEBAC65A), then click Properties > WebPublisher. Installing GroupWise WebAccess 117 Properties of WEBAC65A = WebAccess Access Control v | Reattach | Post Office Links | GroupWise + | NDS Rights vl WebPublisher Proxy User GroupWise Mailbox ID: Password: Library Access Allow access to these libraries: Object ID Web Display Name Domain Post Office | Add... [0 Assign General User Access to WebPublisher users Disk Cache Disk Cache Size: 100 |$] MB Cache Synchronization Interval: | 3600 S seconds Disk Cache Path: | 5 In the GroupWise Mailbox ID field, specify the WebPublisher user you created in Step 2 above. Click Add, then select the library for WebPublisher to access for documents. Select Assign General User Access to WebPublisher Users. In the Disk Cache Path field, specify /opt/novell/groupwise/webpublisher/cache. oon 0 Click OK to save the WebPublisher configuration information. 10 Restart your Web server, as described in “Starting the Web Server” on page 121 11 Restart the WebAccess Agent, as described in “Starting the Linux WebAccess Agent for the First Time” on page 121. In order the add documents to the library so that they can be viewed on the Internet, WebPublisher user must use the GroupWise Windows client. See “Publishing Documents to the Web with WebPublisher” in “Creating and Working with Documents” in the Group Wise 6.5 Windows Client User Guide (http://www.novell.com/documentation/gw65). This functionality is not currently available in the GroupWise Cross-Platform client. Testing GroupWise WebAccess and WebPublisher To test GroupWise WebAccess and WebPublisher, complete the steps in the following sections: + “Testing WebAccess on a Workstation” on page 126 + “Testing WebAccess on a Wireless Device” on page 127 + “Testing WebAccess on a Palm OS Device (NetWare and Windows WebAccess)” on page 127 + “Testing GroupWise WebPublisher” on page 128 Testing WebAccess on a Workstation 1 To access the WebAccess client when the WebAccess Agent is running on NetWare or Windows, in a Web browser, enter the IP address or hostname of the Web server. http://web_server_address 118 GroupWise 6.5 Installation Guide or To access the WebAccess client when the WebAccess Agent is running on Linux, in a Web browser, enter the IP address or hostname of the Web server plus the directory where the Novell Web Services page is located:. http://web_server_address/gw 2 On NetWare and Windows, if the Novell Web Services page is not the Web server’s default page, click the link you created to the page. 3 Select a GroupWise WebAccess language, then click Go to display the Login page. You can bypass the Novell Web Services page to go directly to the Login page by using the following URL: NetWare/Windows: http://web_server_address/servlet/webacc Linux: http://web_server_address/gw/webacc where web_server_address is the IP address or DNS hostname of your Web server. If the Web server uses SSL, you'll need to use https rather than http. 4 Type your Group Wise user ID or Group Wise full name in the Name box and your Group Wise mailbox password in the Password box. 5 Click Login to display the Group Wise WebAccess main window. 6 Click Help for more information about using GroupWise WebAccess. Testing WebAccess on a Wireless Device 1 Enter the following URL: NetWare/Windows: http://web_server_address/servlet/webacc Linux: http://web_server_address/gw/webacc where web_server_address is the IP address or DNS hostname of your Web server. If the Web server uses SSL, you'll need to use https rather than http. Follow the instructions in your wireless device’s documentation to add this URL to your Favorites or Bookmarks so you don't need to type the URL every time you log in. 2 Enter your Group Wise user ID and Group Wise mailbox ID. Testing WebAccess on a Palm OS Device (NetWare and Windows WebAccess) 1 Add the Group Wise Web Clipping Application (groupwise.pga) to your Palm OS device. The groupwise.pga file is located in the Web server’s doc_root_directory\com\novell\webacces\palm\en directory. The Group Wise Web Clipping Application is not created by Linux WebAccess. 2 Open the Group Wise Application. To do so, tap the Applications icon, tap the pick-list in the upper-right corner of the screen, select Palm.Net, then tap Group Wise. 3 Enter your GroupWise user ID and password, then log in. Testing GroupWise WebPublisher GroupWise WebPublisher only supports access through a Web browser on a computer. Wireless devices are not supported. Installing GroupWise WebAccess 119 1 To use WebPublisher when the WebAccess Agent is running on NetWare or Windows, in a Web browser, enter the IP address or hostname of the Web server. http://web_server_address or To use WebPublisher when the WebAccess Agent is running Linux, in a Web browser, enter the IP address of hostname of the Web server plus the directory where the Novell Web Services page is located. On NetWare and Windows, if the Novell Web Services page is not the Web server’s default page, click the link you created to the page. Select a GroupWise WebPublisher language, then click Go to display GroupWise WebPublisher. You can bypass the Novell Web Services page to go directly to WebPublisher by using the following URL: Linux: http://web_server_address/gw/webpub NetWare and Windows: http://web_server_address/servlet/webpub where web_server_address is the IP address or DNS hostname of your Web server. Ifthe Web server uses SSL, you’ll need to use https rather than http. To search for a specific document, enter the search words, then click Search. or To browse the documents in a library, click Document Browse, then click the library you want to browse. When you browse a library, the first 10 documents are listed. You can list additional documents if desired. 5 Click Help for more information about using GroupWise WebPublisher. What’s Next The “WebAccess” section of the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65) provides information to help you further configure and maintain GroupWise WebAccess, including how to: + + + Scale Group Wise WebAccess to meet the needs of your users and environment. Control users’ access to Group Wise WebAccess. Secure connections via SSL. Modify the WebAccess Agent’s configuration information, including the number of threads allocated for request processing. Control logging for the WebAccess Agent, WebAccess Application, and WebPublisher Application. Change the WebAccess Agent’s links to post offices. Modify configuration information for the WebAccess Application and WebPublisher Application. Monitor the WebAccess Application through a Web console. Create new Palm Query Application (PQA) files for Palm OS devices. 120 GroupWise 6.5 Installation Guide GroupWise WebAccess Installation Worksheet The following table lists the information you are prompted to provide as you complete the WebAccess installation. The table is divided into three sections: * “WebAccess Agent and WebAccess/WebPublisher Applications” on page 129 lists information you need to provide when you are installing the WebAccess Agent or the WebAccess/WebPublisher Applications. + “WebAccess Agent” on page 129 lists information you need to provide when installing the WebAccess Agent. * “WebAccess/WebPublisher Applications” on page 132 lists information you need to provide when installing the WebAccess Application and/or the WebPublisher Application. WebAccess Agent and WebAccess/WebPublisher Applications Item Explanation 1) Components to Install Select the components you want to install. * WebAccess Agent + WebAccess Application + WebPublisher Application For details, see “GroupWise WebAccess Components” on page 100. WebAccess Agent Item 2) Server Platform and Installation Directory + Platform: NetWare, Linux, or Windows * Installation directory: 3) Server Address * IP address: * DNS hostname: + Port number: (default = 7205)) Explanation Specify the type of network server (NetWare, Linux, or Windows) where you will install the WebAccess Agent. Specify the directory where you will install the WebAccess Agent. The default Linux directory is / opt/novell/groupwise/agents/bin. The default NetWare directory is sys:\system. The default installation workstation. Windows directory is c:\webacc. The directory path you specify must be from the perspective of the For details, see “Deciding Where to Install the GroupWise WebAccess Components” on page 104. Specify the IP address or DNS hostname of the network server where you will install the WebAccess Agent. The WebAccess Installation program will attempt to discover this information from the server, but you should be prepared to supply it in case the attempt fails. If port 7205 is already in use, specify a different port. For details, see “Network Address” on page 105. Installing GroupWise WebAccess 121 Item Explanation 4) Clustering Support This item applies to the NetWare WebAccess Agent only. * Enable: Yes | No Select Yes if you want to configure the WebAccess Agent for clustering. For details, see “Novell Cluster Services” on page 102. 5) Gateway Directory Specify the domain name and the path to the domain directory you want to associate with the E WebAccess Agent. The WebAccess Agent stores configuration information and work files in the * Domain name: A directory. * Domain directory path: Specify the name of the gateway directory you want created for the WebAccess Agent. This directory is created in the domain\wpgate or domain/wpgate directory. * Gateway directory name: On Linux, specify the eDirectory context of the Domain object. (default=WEBAC65A or webacc65a) For details, see “Gateway Directory Location and Name” on page 106. + eDirectory context: 6) Gateway Object Specify a name for the GroupWise Gateway object that will be created in eDirectory to represent è Nara the WebAccess Agent. The default name is the same as the gateway directory. (default=WEBAC65A For details, see “Gateway Object Name” on page 106. or webacc65a) 7) eDirectory This item applies if you are installing the NetWare or Linux versions of the WebAccess Agent. It Authentication does not apply to the Windows version. * Username: Specify an eDirectory username and password that will provide the WebAccess Agent with file A system access to the servers where the domain and post office directories reside. + Password For details, see “Domain and Post Office Access” on page 106. 8) Execution Options This item applies only if you are installing the Windows version of the WebAccess Agent. + Install and Configure if you want to enable the WebAccess Agent to be managed through an SNMP management SNMP for WebAccess program, select the Install and Configure SNMP for WebAccess option. Agent: Yes | No If you want to run the WebAccess Agent as a Windows service, select the Run WebAccess Agent as a Windows Service option, then choose whether you want to manually start the service each time or have it start automatically when the server starts. + Run WebAccess Agent as a Windows Service: Yes | No Startup Options: For details, see “Windows Options” on page 108. Automatic | Manual 9) Windows Service User This item applies only if you are installing the Windows version of the WebAccess Agent and plan to run itas a Windows service rather than a normal Windows application. + Username: Enter the username and password for a user account that provides the service with access to the domain and post office directories. + Password: For details, see “Windows Options” on page 108. 122 GroupWise 6.5 Installation Guide Item 10) Web Console Enable: Yes | No * Username: + Password: * HTTP Port: (default = 7211) 11) LDAP Information * LDAP server IP address: * LDAP server port: + Username in LDAP format: + Password: + SSL certificate: 12) WebPublisher Support * Enable: Yes | No * Mailbox ID: + Password: 13) Libraries Explanation Specify whether or not you want to enable the WebAccess Agent's Web console. The Web console allows you to monitor the operation of the agent through a Web browser. If you choose to enable the Web console, specify a WebAccess Agent username and password to use when logging in to the agent. If port 7211 is already in use, specify a different HTTP port. For details, see “Web Console” on page 108. This item applies to the Linux WebAccess Agent only. List the IP address and port of an LDAP server in your system and the username and password that the Installation Advisor can use to log in to eDirectory to create the WebAccess Agent object. If you want to use an SSL connection, specify an SSL certificate file. For more information, see “LDAP Information (Linux Only)” on page 109. Specify whether or not you want to enable the WebAccess Agent to support WebPublisher. If you enable WebPublisher support, you need to specify a GroupWise account (mailbox ID and password). For details, see “WebPublisher” on page 109. List the libraries from which you want to enable GroupWise users to share documents with WebPublisher users. For details, see “WebPublisher” on page 109. Installing GroupWise WebAccess 123 WebAccess/WebPublisher Applications Item 13) Web Server Type and Root Directory Web server type: * Netscape Enterprise Server for NetWare * Apache Web Server for NetWare + Netscape FastTrack\Enterprise Server for Windows NT * Microsoft Internet Information Server for Windows NT + Apache Web Server for UNIX Solaris Web server root directory: 14) Web Clipping Application (PQA) URL 15) Web Server Default Page * Current * Novell Web Services 16) Novell Root Directory Explanation This item applies if you are installing the NetWare or Windows versions of the WebAccess Application. Select the type of Web server where you will install the WebAccess Application and/or the WebPublisher Application. Specify the path to the Web server's root directory. The path must be from the perspective of the installation workstation. For details, see “Deciding Where to Install the GroupWise WebAccess Components” on page 104. This item applies if you are installing the NetWare or Windows versions of the WebAccess Application. Specify the URL that you want built into the Web Clipping Application (PQA) that enables Palm OS devices to access GroupWise WebAccess. For details, see “Web Clipping Application (PQA) URL (NetWare and Windows WebAccess)” on page 110. This item applies if you are installing the NetWare or Windows versions of the WebAccess Application. Select whether you want to retain your Web server’s current default page or replace it with the Novell Web Services page. For details, see “Web Server Default Page” on page 111. Specify a directory on the Web server where you want to install the configuration files for the WebAccess Application and/or WebPublisher Application. For NetWare and Windows, the default is the novell directory on the root of the server volume. For Linux, the default is /opt/novell/ groupwise/webaccess and /opt/novell/groupwise/webpublisher. For details, see “Deciding Where to Install the GroupWise WebAccess Components” on page 104. 124 GroupWise 6.5 Installation Guide Item 17) Java Servlet Engine * Use Novell Servlet Gateway + Use Tomcat + Use other Java servlet engine Path: 18) Default Language 19) eDirectory Object Configuration * Tree: + Context: Explanation This item applies if you are installing the NetWare or Windows versions of the WebAccess Application. Specify whether you want to use the Novell Serviet Gateway, Tomcat, or another Java servlet engine that is already installed on your Web server. If you use Tomcat or another Java servlet engine other than the Novell Servlet Gateway, you need to specify the path to the Java servlet engine’s root directory. For details, see “Deciding Where to Install the GroupWise WebAccess Components” on page 104. Specify the language for the initial Novell Web Services page. For details, see “Default Language” on page 111. Specify the tree where you are installing WebAccess. Specify the context where the WebAccess Installation program should create the WebAccess Application and/or WebPublisher Application objects. The default context is below the Domain object. For details, see “eDirectory Objects and Configuration Files” on page 112. Installing GroupWise WebAccess 125 126 GroupWise 6.5 Installation Guide Installing GroupWise Monitor Novell® GroupWise® Monitor is a monitoring and management tool that allows you to monitor Group Wise agents and gateways from any location where you are connected to the Internet and have access to a Web browser. Some agent administration can also be performed from your Web browser. The topics below help you plan and set up GroupWise Monitor: * “GroupWise Monitor Overview” on page 135 * “Monitor System Requirements” on page 137 * “Planning Group Wise Monitor” on page 139 * “Setting Up Group Wise Monitor” on page 143 * “GroupWise Monitor Installation Worksheet” on page 152 NOTE: If you plan to install GroupWise Monitor in a clustered server environment provided by Microsoft Clustering Services, see the GroupWise 6.5 Interoperability Guide (http://www.novell.com/documentation/ gw65) for additional information. GroupWise Monitor Overview Group Wise Monitor consists of two components: Monitor Agent: The Monitor Agent continuously polls other GroupWise agents (POA, MTA, Internet Agent, WebAccess Agent, Messenger Agents, and gateways), gathers status information from them, and displays the status information at the Monitor Agent console. The Monitor Agent also services requests for agent status information from the Monitor Application. Monitor Application: The Monitor Application extends the capability of your Web server so that agent status information can be displayed in the Monitor Web console in your Web browser. The Monitor Agent and the Monitor Application can run on the same server or on different servers, depending on the needs of your system. * “One Monitor Server vs. Two” on page 135 * “Monitor Security Requirements” on page 136 One Monitor Server vs. Two The Monitor Agent and the Monitor Application can run together on a Linux server or a Windows server, as illustrated below: Installing GroupWise Monitor 127 Web Web s—ä Server Monitor ETTE a_i una Workstation windows X mentor | or Linux The server where they run together must be a Web server because the Monitor Application is installed into the Web server installation. GroupWise System The Monitor Agent and the Monitor Application can also run on different servers. In addition to running on a Linux or Windows server, the Monitor Application can also run on a NetWare® or UNIX Solaris server in conjunction with a Web server running on one of those platforms, as illustrated below: Web Web Moni Server onitor Browser Application T i A Mau Workstation NetWare, 34-4 Ann Linux, or Linux System Windows, or UNIX Solaris Security, discussed in the next section, might also determine whether you run the Monitor Agent on the same server as the Web server. Monitor Security Requirements GroupWise Monitor can be configured to support the level of security you have established for your Internet/intranet communication. If you are not concerned about security issues (for example, you only plan to use Monitor on a secured intranet), you can install the Monitor components to any servers that provide access for your GroupWise administrators and that meet the requirements listed in “Monitor System Requirements” on page 137. If you plan to use Monitor to provide GroupWise administrators with access to your GroupWise system from anywhere on the Internet (rather than simply within a secured intranet), and you already have a firewall in place to provide security, you have the following options for configuring Monitor: ¢ Install both Monitor components inside your firewall and use a proxy service. See “Configuring Monitor Using a Proxy Service” on page 137. This is the recommended configuration. ¢ Install the Monitor Application on a Web server outside your firewall and the Monitor Agent on a server inside your firewall. See “Configuring Monitor Without a Proxy Service” on page 137. 128 GroupWise 6.5 Installation Guide Configuring Monitor Using a Proxy Service If your firewall includes a proxy service, you can install the Monitor Application to a Web server inside your firewall, and the Monitor Agent to another server inside the firewall, as shown in the following illustration. GroupWise Firewall Server Web Server Network Server System with Proxy with Monitor with Monitor y Internet Service Application Agent If desired, the Monitor A gent can also be installed to the Web server rather than a separate server, as discussed in “One Monitor Server vs. Two” on page 135. Configuring Monitor Without a Proxy Service If your firewall does not provide a proxy service, you need to install the Monitor Application to a Web server that is outside the firewall. Because the Monitor Agent requires direct access (mapped drive, UNC path, or file system mount) to a GroupWise domain directory, it needs to be installed to a server that is located within the firewall. GroupWise Web Server Firewall Network Server System with Monitor Server with Monitor y Internet Application Agent The firewall must allow inbound IP packets to be sent from the Web server to the IP address and port number of the Monitor Agent (for example, 172.16.5.18:8200). In addition, the firewall must allow outbound IP packets to be sent from the Monitor Agent to the Web server. This requires all high ports (above 1023) to be open to outbound IP packets. Monitor System Requirements O 32-bit/x86 processor A Any of the following server operating systems: + SUSE? Linux Standard Server 8, SUSE Linux Enterprise Server 8, SUSE Linux Enterprise Server 9, Red Hat Enterprise Linux 3 ES, or Red Hat Enterprise Linux AS * Windows NT Server, Windows 2000 Server, or Windows 2003 Server, plus the latest Service Pack for your version of Windows O Approximately 140 MB (111 MB shared with WebAccess; varies by platform) O Any of the following Web servers and Java servlet engines: * NetWare 4.2/5.1 (latest Support Pack required): NetWare Enterprise Web Server with the Novell Servlet Gateway Installing GroupWise Monitor 129 * NetWare 6.x: Enterprise Web Server or Apache Web Server, with the Tomcat 3.3 servlet engine * NetWare 6.5 with GroupWise 6.5 Support Pack 1 or later: Apache 2 with the Tomcat 4 servlet engine * Windows NT (latest Service Pack required): Microsoft Internet Information Server 4.0 or Netscape Enterprise Server 3.6 or later, either with the Novell Servlet Gateway + Windows 2000: Microsoft Internet Information Server 5 or later with the Novell Servlet Gateway * Linux: Apache 2 with the Tomcat 4 servlet engine * UNIX Solaris: Apache Web Server 1.3.3 or later with the Tomcat servlet engine O Java Virtual Machine (JVM) 1.4.2 or later Keep in mind the following platform-specific details: * NetWare servers can run only one JVM. On NetWare, the Monitor Application requires JVM 1.1.7B dated 12/12/2001 or later. This version is included with Monitor. During installation, you are prompted to replace your current version with the Monitor version; you should do so unless the server’s current version is newer. * Linux servers require J2SDK 1.4.2 and Jakarta Connector 1.2.3 in addition to the JVM. The JVM and the additional Java components can be installed when you install Monitor on Linux, or you can integrate Monitor into an existing Java installation. * Windows servers can run multiple JVMs at the same time. To ensure compatibility with the Monitor Application, you should install JVM 1.1.8 or higher. JVM 1.4.1 (Java 2 Runtime Environment, Standard Edition Version 1.4.1) is included with Monitor. + A JVM is not included for UNIX Solaris. You need to separately install JVM 1.1.7B or later to your UNIX Web server. Install the latest version available. O Any of the following Web browsers for the agent Web consoles: * Windows: Microsoft Internet Explorer 4.0 or later; Netscape Navigator 4.0 or later * Linux: Mozilla 1.4 or later and comparable Mozilla-based browsers; Netscape 6.2.2 or later * Macintosh: Safari 1.0 or later, Microsoft Internet Explorer 4.5 or later; Netscape Navigator 4.51 or later * UNIX: Netscape 4.0 or later; Microsoft Internet Explorer 4.0 or later O Any of the following wireless devices for the agent Web consoles: * Any wireless device that supports the Wireless Access Protocol (WAP) and has a microbrowser that uses Handheld Device Markup Language (HDML) 3.0 or later or Wireless Markup Language (WML) 1.1 or later * A Palm OS device with any Palm OS version that supports Web Clipping Applications (PQAs) * A Windows CE device with any Windows CE version 130 GroupWise 6.5 Installation Guide Planning GroupWise Monitor Before installing GroupWise Monitor, you should complete the planning tasks listed below. The planning tasks help you gather information you need as you install and set up Group Wise Monitor. You can use the “GroupWise Monitor Installation Worksheet” on page 152 to record your installation and setup information. * “Deciding Where to Install the GroupWise Monitor Components” on page 139 * “Determining the Monitor Agent’s Configuration” on page 140 * “Determining the Monitor Application’s Configuration” on page 141 Deciding Where to Install the GroupWise Monitor Components Monitor Server Web Server After reviewing “Group Wise Monitor Overview” on page 135 and the system requirements listed in “Monitor System Requirements” on page 137, plan where you want to install the Monitor components in your system. * “Monitor Server” on page 139 “Web Server” on page 139 The Monitor Agent runs on Linux and Windows. If you want to install the Monitor Agent and the Monitor Application on the same server, you can install them at the same time. If you want to install them on different servers, you must run the Monitor Installation program twice, once for each server. For example, you might want to install the Monitor Application on NetWare for use with a NetWare Web server, but you must always install the Monitor Agent on Linux or Windows. The installation directory for the Monitor Agent depends on the platform: * Linux: The Linux Monitor Agent is automatically installed to the bin and lib subdirectories of /opt/novell/groupwise/agents. * Windows: The default installation directory is c:\gwmon. GROUPWISE MONITOR INSTALLATION WORKSHEET Under Item 1: Platform, mark the platform (Linux or Windows) where you plan to install the Monitor Agent. Under Item 2: Components to Install, select whether you want to install the Monitor Agent, the Monitor Application, or both. Under Item 3: Monitor Agent Installation Path, specify the directory on the Linux or Windows server where you want to install the Monitor Agent software. The Monitor Application integrates with your Web server to pass agent status information gathered by the Monitor Agent to your Web browser for display in the Monitor Web console. The location of the Monitor Application files that are installed depends on the Web server that it is being integrated with. For example, on Windows, the images used to produce the Monitor Web console interface and the Monitor Web console help files are installed in the Installing GroupWise Monitor 131 docs\com\novell\gwmonitor subdirectory beneath the Web server root directory. On Linux, they are installed in the gwmon/com/novell/gwmonitor subdirectory beneath the tomcat/webapps directory. The Web server uses a servlet engine in order to incorporate product-specific components, such as the Monitor Application, into its functioning. GROUPWISE MONITOR INSTALLATION WORKSHEET Under Item 7: Web Server, select the Web server you want to use with Monitor. Under Item 8: Web Server Path, specify the directory path to the Web server root directory. Under Item 12: Java Servlet Engine, mark whether you want to use the Novell Servlet Gateway, the Tomcat Servlet Gateway, or another Java servlet engine. If you use the Novell Servlet Gateway, it is installed in sys:java on NetWare or in c:\novell\java on Windows. If you choose to use the Tomcat Servlet Gateway or another Java servlet engine, you need to specify the directory path to where the servlet engine is installed. Determining the Monitor Agent’s Configuration As you install the Monitor Agent, you are prompted to supply the configuration information described in the following sections: * “Monitor Agent Network Address” on page 140 * “Domain Directory Path” on page 140 * “Default Monitor Agent Language (Windows Only)” on page 141 * “LDAP Information (Linux Only)” on page 141 Monitor Agent Network Address The Monitor Agent communicates with the Monitor Application and with monitored agents by way of TCP/IP. GROUPWISE MONITOR INSTALLATION WORKSHEET Under Item 4: Monitor Agent Network Address, record the IP address or DNS hostname of the Linux or Windows server where you plan to install the Monitor Agent software. Use the default port number of 8200 unless that number is already in use on that server. Domain Directory Path The Monitor Agent can gather information about the locations of GroupWise agents to monitor by reading from a domain database. Using the gathered information, the Monitor Agent can display a list of monitored agents when you start it for the first time. GROUPWISE MONITOR INSTALLATION WORKSHEET Under Item 5: Domain Directory Path, specify the directory path to a domain where a GroupWise 6.x MTA is running. 132 GroupWise 6.5 Installation Guide Default Monitor Agent Language (Windows Only) Group Wise Monitor is automatically installed in all available languages. During installation, you can select a default language for the Monitor Agent console interface, which is available on Windows but not on Linux. GROUPWISE MONITOR INSTALLATION WORKSHEET Under Item 6: Default Monitor Agent Console Language, specify a default language. On Linux, you use the Monitor Web console exclusively. LDAP Information (Linux Only) If you are installing the Linux Monitor Agent and Monitor Application, the Installation Advisor needs to access eDirectory through LDAP. eDirectory access is required in order to create the Monitor Agent and Monitor Application objects. To obtain access, the Installation Advisor needs the IP address and port number of an LDAP server, along with a username and password to log in with. Because the Linux Installation Advisor uses LDAP to access eDirectory, you must provide the username in LDAP format. For example: cn=admin,ou=users,o=corporate If you want to secure the connection to eDirectory with SSL, you can specify a certificate file. For background information about SSL, see “Encryption and Certificates” in “Security” in the Group Wise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). If you do not want to use SSL, the LDAP server must be configured to accept clear text passwords WORKSHEET Under Item 15: LDAP Information, specify the IP address and port number of an LDAP server, a username in LDAP format, the password for the username, and if necessary, the full path to your SSL certificate file. Determining the Monitor Application’s Configuration As you install the Monitor Application to a Web server, you are prompted to supply the configuration information described in the following sections: + “Web Clipping Application (PQA) URL” on page 141 * “Web Server Default Page” on page 142 + “eDirectory Objects and Configuration File” on page 142 * “Default Monitor Web Console Language” on page 143 Web Clipping Application (PQA) URL On Windows, the Monitor Installation program creates a Web Clipping Application (PQA), also referred to as a Palm Query Application, to enable Palm OS device users to access the Group Wise Monitor Web console. (The Web Clipping Application is not available on Linux.) The Web Clipping Application, named gwmon.pga, includes the URL required to connect to the Monitor Application, a Login page, an About Novell GroupWise page, and the images used when displaying the Monitor Web console on the Palm OS device. Installing GroupWise Monitor 133 You must specify the URL you want used. For example: http://groupwise.novell.com The Monitor Installation program automatically appends /servlet/gwmonitor to the URL so that users are directed to the Monitor login page. For example, using the URL above, the Monitor Installation program creates the following URL in the gwmon.pga file: http://groupwise.novell.com/servlet/gwmonitor As you determine the URL, keep in mind the following: * Ifthe Web server uses SSL, you need to change http to https. ¢ If you are using a proxy server, you need to specify the proxy server’s address. * The Web clipping proxy server (gateway) does not currently support challenge and response authentication. Therefore, you need to ensure that the Web server is not configured to require basic challenge response authentication, or at least is configured not to require this authentication for the URL defined in the gwmon.pga file. GROUPWISE MONITOR INSTALLATION WORKSHEET Under Item 9: Web Clipping Application (PQA) URL, specify the URL you want included in the gwmon.pga file. Web Server Default Page The main Novell Web Services page (novell.htm) is installed to the Web server’s root directory. In the Windows Monitor Installation program, you can have this file replace the Web server’s current default Web page, or you can retain the current default Web page. On Linux, this Web page is handled differently, so there is no need to replace an existing Web page on Linux. If you use the Novell Web Services page as the default Web server page, the Web server’s current default page remains in its original location but is renamed to filename.001 (for example, default.001 or index.001). You should change the default Web server page only if the server and its Web server are used solely for Novell products. As you install additional Novell products, the Novell page is updated to allow access to each one. GROUPWISE MONITOR INSTALLATION WORKSHEET Under Item 10: Default Web Page, specify whether you want to use the Novell Web Services page or retain the Web server’s current default page. eDirectory Objects and Configuration File Monitor Application configuration information is stored in two places: in Novell eDirectory™ and in a configuration file. You can easily modify the configuration information in ConsoleOne® by editing the properties of the GroupWise Monitor Application object (named Group WiseMonitor). However, the configuration file is required if you need to install the Monitor Application to a Web server that is outside your firewall, where access to eDirectory is not available. The default location of the Monitor Application configuration file depends on the platform: ¢ Linux: The Monitor Application configuration file is /opt/novell/groupwise/agents/ gwmonitor/gwmonitor.cfg. 134 GroupWise 6.5 Installation Guide * Windows: The default application configuration file path is c:\novell and the Monitor Application configuration file (gwmonitor.cfg) is created in the gwmonitor subdirectory of the directory you specify. GROUPWISE MONITOR INSTALLATION WORKSHEET If you are installing the Windows Monitor, under Item 11: Monitor Configuration File Path, specify the directory on the Web server where you want to create the Monitor Application configuration file. On Linux, the Monitor software is automatically installed in subdirectories under /opt/novell/groupwise/ agents. Under Item 13: Monitor Object Configuration, specify the tree and context where you want the Monitor Installation program to create the GroupWise Monitor Application object and the accompanying Monitor Provider object (named GroupWiseProvider). eDirectory is considered the master location for the Monitor Application configuration information. Any changes made directly to the Monitor Application configuration file are overwritten the next time the information in eDirectory is modified and saved. The default configuration information is sufficient for an initial Monitor installation. For more information about configuring Monitor, see “Monitor” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Default Monitor Web Console Language Group Wise Monitor is automatically installed in all available languages. If necessary, you can select a different default language for the Monitor Web console interface and default Web server page than you selected for the Monitor Agent console interface. GROUPWISE MONITOR INSTALLATION WORKSHEET Under Item 13: Default Monitor Web Console Language, specify a default language. Setting Up GroupWise Monitor Follow the instructions for the platform where you are setting up GroupWise Monitor: * “Setting Up GroupWise Monitor on Linux” on page 143 + “Setting Up GroupWise Monitor on Windows” on page 148 * “Completing Optional Post-Installation Tasks” on page 149 Setting Up GroupWise Monitor on Linux Complete the following tasks to install GroupWise Monitor on Linux: + “Installing the Linux Monitor Agent” on page 144 * “Configuring the Linux Monitor Agent” on page 144 ¢ “Starting the Linux Monitor Agent for the First Time” on page 146 * “Accessing the Monitor Web Console on Linux” on page 146 + “Starting the Linux Monitor Agent on System Startup” on page 147 + “Stopping the Linux Monitor Agent” on page 147 Installing GroupWise Monitor 135 Installing the Linux Monitor Agent 1 Make sure that LDAP is running on your eDirectory server and that it is configured to accept login from the Monitor Agent Installation program (worksheet item 15) The Installation Advisor requires eDirectory access in order to create the Monitor objects in eDirectory. The Installation Advisor uses LDAP to gain the required access. 2 At the Linux server where you want to install Monitor, open a new terminal window, then enter the following command: xhost + localhost If you cannot execute this command because the X Window System is not running on the Linux server, see “Installing the GroupWise Agents Using the Text-Based Installation Advisor” on page 167, which describes the process for the POA and the MTA. 3 Become root by entering su and the root password. 4 Change to the root of the GroupWise 6.5 for Linux Administrator CD. 5 Start the GroupWise Installation Advisor. ./install 6 Select the language in which you want to run the Installation Advisor and install software, then click OK. 7 Click Install Products > GroupWise Monitor > Install GroupWise Monitor. The Monitor Agent software is installed to the bin and lib subdirectories of /opt/novell/ groupwise/agents. 8 When the file copy is complete, click OK. 9 Continue with Configuring the Linux Monitor Agent. Configuring the Linux Monitor Agent 1 After the Monitor Agent files have been installed, click Configure Monitor. The Monitor Agent installation and configuration steps are separate so that you can install updated agent software without needing to repeat the agent configuration steps. | Introduction | a i | C] introduction Welcome to the GroupWise Monitor Agent Configuration Program. This | program will create configuration files for the Group Wise Monitor Agent O | | | | | | | Cancel | | Next | | 2 Review the Introduction, then click Next. 3 Accept the License Agreement, then click Next. 136 GroupWise 6.5 Installation Guide 4 Browse to and select a domain directory (worksheet item 5) where the Monitor Installation program can access a domain database, then click Next. This allows the Monitor Agent to automatically discover all agents in your Group Wise system and start monitoring them. 5 Click Exit to complete the installation. 6 Continue with Installing and Configuring the Monitor Application. Installing and Configuring the Monitor Application 1 After installing and configuring the Monitor Agent, click Install Monitor Application with Apache and Tomcat. This installs a version of Apache and Tomcat specifically for use with GroupWise. Apache files are installed under /var/opt/novell/http and /etc/opt/novell/http. Tomcat files are installed under /var/opt/novell/tomcat4 and /etc/opt/novell/tomcat4. or If you want to use an existing Apache/Tomcat installation, click Install Monitor Application. 2 Accept the License Agreement, then click Next. 3 Specify the IP address or DNS hostname of the Linux server where you are installing the Monitor Application (worksheet item 4), then click Next. The default port number of 8200 is typically acceptable, unless another program is already using that port. 4 Click Next to accept the default Apache and Tomcat locations that were established in Step 1. or Specify the locations of Apache and Tomcat installations on your system, then click Next. 5 Fill in the LDAP information (worksheet item 15), then click Next. 6 Browse to and select the eDirectory context where you want the Monitor Application objects to be created (worksheet item 19), then click Next. The GroupWise Monitor Application objects are GroupWiseMonitor and MonitorProvider. 7 Click Exit to complete the configuration. 8 Continue with Starting the Web Server. Starting the Web Server If you installed Apache and Tomcat along with the Monitor Application, follow the instructions below to start your Web server. If you did not install Apache and Tomcat along with the Monitor Application, restart Apache and Tomcat on your system. 1 Make sure you are logged in as root. 2 Ifyou have other instances of Apache and Tomcat running on this server, bring them down before you start the new versions you just installed. 3 Change to the /etc/init.d directory. 4 Start Tomcat. ./novell-tomcat4 start Installing GroupWise Monitor 137 5 Wait until Tomcat is all the way up. 6 Start Apache. ./novell-httpd start 7 Continue with Starting the Linux Monitor Agent for the First Time. Starting the Linux Monitor Agent for the First Time 1 Make sure you are logged in as root. 2 Make sure you know the path to a domain directory where a domain database (domain.db) is located or the IP address of a server where the MTA is running. 3 Change to the GroupWise agent bin directory. cd /opt/novell/groupwise/agents/bin 4 Use one of the following commands to start the Monitor Agent: -/gwmon --home /domain directory € . /gwmon --ipa IP address --ipp port number € The --home startup switch specifies a domain directory where the Monitor Agent can access a domain database. The --ipa startup switch specifies the IP address of a server where an MTA is running, which is another way for the Monitor Agent to obtain information from a domain database. The -- ipp startup switch specifies the port number on which the Monitor Agent listens for incoming service requests. The ampersand (&) causes the Monitor Agent to run in the background, so that the terminal window you started it in is again available for use. A message indicates that the Monitor Agent is polling the domain you specified. You can also start the Monitor Agent using its startup script (/etc/initd/grpwise-ma). The Monitor Agent does not have a --show switch. The Monitor log file (mmddmon.nnn) for status messages is located in the /var/log/novell/groupwise/gwmon directory. The log file name includes the month and day when it was created, along with an incrementing extension to accommodate multiple log files on the same day. The Monitor Agent can also be monitored from your Web browser. 5 Continue with Accessing the Monitor Web Console on Linux. Accessing the Monitor Web Console on Linux 1 In your Web browser, view the following URL: http://network_address/gwmon/gwmonitor 138 GroupWise 6.5 Installation Guide GroupWise» Monitor CERERE (E Novell. y Oe Corporate Mail Monitored agents for “Corporate Mail" group X Remote Agents Total: 4 Displayed: 1-4 Greate | Problem || Suspend || Resume || Move || Options || Thresholds | Refresh fap [mw ] E Status Status Duration Up Time Type Version mr Normal 1d16h52m 3d14h58m MTA 6.5.1 (04/29/2004 Refresh E Normal 0d0h 14m 0d0ht0m POA 6.5.1 (04/29/2004 Hep [= Normal 14 16h52m 19423h50m MTA 6.5a (7/10/2003) TT (9) Development.Provol Normal 1d16h52m 19d23h50m POA 6.5a (7/10/2003) For instructions on protecting the Monitor Agent Web console with a password, see “Configuring Authentication and Intruder Lockout for the Monitor Web Console” in “Monitor” in the Group Wise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). Starting the Linux Monitor Agent on System Startup If you selected Launch Monitor Agent on System Startup in the Monitor Agent Installation program, your system was configured so that the Monitor Agent would start automatically. The Monitor Installation program always creates a grpwise-m a startup script in /etc/init.d for starting the Monitor Agent. To enable automatic startup, the Monitor Installation program creates symbolic links named S99grpwise-ma in the rc3.d and rc5.d directories so that the Monitor Agent can load on startup into runlevel 3 or 5, depending on the configuration of your Linux system. When the grpwise-ma script runs and starts the Monitor Agent, it reads the Monitor Agent configuration file (monitor.xml) in /opt/novell/groupwise/agents/share to check for configuration information. Stopping the Linux Monitor Agent When you start the Monitor Agent with the grpwise-ma startup script, you can also use the script to stop it. 1 Make sure you are logged in as root. 2 Change to the /etc/init.d directory. 3 To stop the Monitor Agent, enter the following command: ./grpwise-ma stop 4 To confirm that the Monitor Agent has stopped, enter the following command: ps -eaf | grep gwmon The only gwmon process ID you should see listed is the one for the grep command. When you start the Monitor Agent manually (without using the grpwise-ma script), use the standard Linux kill command to stop it. 1 Make sure you are logged in as root. 2 Determine the process ID of the Monitor Agent. ps -eaf | grep gwmon The PIDs for all gwmon processes are listed. 3 Kill the first gwmon process in the list. Installing GroupWise Monitor 139 kill first process ID It might take a few seconds for all gwmon processes to terminate. 4 Repeat the ps command to verify that the Monitor Agent stopped. Setting Up GroupWise Monitor on Windows 1 Ata Windows server that has the Novell Client™ installed, log in as an Admin equivalent to the eDirectory tree in which you are installing Monitor. The Monitor Installation program requires the Novell Client in order to create GroupWise objects in eDirectory. If necessary, you can download the Novell Client from the Novell Product Downloads site (http://download.novell.com). 2 Ifyou want to monitor GroupWise gateways or non-HTTP-enabled agents (such as earlier versions of any GroupWise agent), install the SNMP service for Windows. This enables the Monitor Agent to use SNMP in addition to HTTP. 3 Make sure no GroupWise agents are currently running on the Windows server where you plan to install the Monitor Agent. 4 Run setup.exe at the root of the GroupWise 6.5 Administrator CD, then click Install Products > GroupWise Monitor > Install GroupWise Monitor. or Run setup.exe from the \admin\monitor subdirectory on the CD or in your software distribution directory if you have updated it with GroupWise 6.5 software. 5 Follow the on-screen instructions to install GroupWise Monitor, supplying the information you gathered on the “GroupWise Monitor Installation Worksheet” on page 152. On Windows, the Monitor Installation program starts the Monitor Agent for you and the Monitor Agent console displays on the Windows server. tè GroupWise Monitor Configuration View Actions Reports Log Help E Corporate Mal = y NetWare Agents 12) n 5h53 Sn 12) Y Nomal 3d5h49m Piowol MTA 3d5h53m 5 714 NUM a ws Agents (2 DEI Windows Gateways (2) Next Poll: 259 seconds (HTTP: 8200 Agents: 2 After installation is complete, you might need to perform some additional steps, as described in “Completing Optional Post-Installation Tasks” on page 149. Completing Optional Post-Installation Tasks Depending on the configuration you have chosen for the Monitor Agent and Monitor Application, you might need to perform one of more of the following tasks after you have installed the Monitor software: 140 GroupWise 6.5 Installation Guide ¢ If you kept your Web server’s default home page file, create a link from your home page to the Novell Web Services page (novell.htm file) in the document root directory. ¢ Ifyou use a proxy service, follow the instructions in “Configuring Proxy Service Support for the Monitor Web Console” in “Monitor” in the GroupWise 6.5 Administration Guide. + If you are installing to the Apache Web Server for UNIX Solaris, continue with “Completing the Monitor Installation on a UNIX Apache Web Server” on page 149. * (Windows only) If you chose to use an existing Java servlet engine rather than installing the Novell Servlet Gateway, modify the Java servlet engine’s servlet properties files to include the settings shown in the sample Monitor servlet.properties file. This sample file is located in the \admin\monitor\other directory on the CD. * (Windows only) If you chose to use an existing JVM on Windows rather than update to the one included with Monitor, edit the servletgateway.properties file and change the java.base setting to point to the existing JVM (for example, c:\jdk1.1.8). The servletgateway.properties file is located the \novell\java\servlets directory. After completing any post-installation tasks that pertain to your Monitor configuration, continue with “Using GroupWise Monitor” on page 150. Completing the Monitor Installation on a UNIX Apache Web Server The Monitor Installation program copies the following files to the location you specified: gwmonitor.tar, gwmonitordocs.tar, gwmonitorjars.tar, gwmonitorservlets.tar, index.html, and servlets.properties. It also creates a palm subdirectory for the Palm Query Application (PQA) file it creates. To complete the installation and configuration process: 1 Using the tar -xvf command, extract the following tar files to the specified locations: + gwmonitor.tar: Extract to the root of the UNIX server. A /novell directory is created for the files. + gwmonitordocs.tar: Extract to the Apache document root directory (for example, /usr/ local/apache/htdocs). + gwmonitorservlets.tar: Extract to the Tomcat ROOT/WEB-INF/classes directory (for example, /usr/local/tomcat/webapps/ROOT/WEB-INF/classes). + gwmonitorjars.tar: Extract to the Tomcat ROOT/WEB-INF/lib directory (for example, /usr/local/tomcat/webapps/ROOT/WEB-INF/lib). 2 Modify the Tomcat web.xml file to include the following information. The web.xml file is in the Tomcat ROOT/WEB-INF directory. <web-app> <servlet> <servlet-name>gwmonitor</servlet -name> <servlet-class>com.novell.gwmonitor.MonitorServlet</servlet-class> <init-param> <param-name>Config</param-name> <param-value>/novell/gwmonitor/gwmonitor.cfg</param-value> </init-param> <load-on-startup> </load-on-startup> </servlet> </web-app> Installing GroupWise Monitor 141 3 Modify the gwmonitor.cfg file, located in the /novell/gwmonitor directory at the root of the UNIX server, to change the Templates.path setting to point to the templates. For example, change the following line in webacc.cfg: Templates.path=/java/servlets/com/novell/gwmonitor/templates to Templates.path=/usr/local/tomcat /webapps/ROOT/WEB-INF/classes/com/ novell/gwmonitor/templates 4 In the gwmonitor.cfg file, verify that the paths for the following settings point to valid directories. Typically, these directories reside in the /novell/gwmonitor directory, but you can relocate them if desired. Refer to the comments in the gwmonitor.cfg file for explanations of each of these settings. Log.path=/novell/gwmonitor/logs Security.Timeout.path=/novell/gwmonitor/users 5 Copy the index.html file to the Apache document root directory (for example, /usr/local/ apache/htdocs). You can replace your Web server’s current default home page with this file, or you can rename the file and link to it from your current default home page. Using GroupWise Monitor You can use GroupWise Monitor in various environments: * “Monitor Agent Console on a Windows Server” on page 150 * “Monitor Web Console in Your Web Browser” on page 151 * “Monitor Web Console on Your Palm OS Device” on page 152 Monitor Agent Console on a Windows Server To start the Monitor Agent on a Windows server and display the Monitor Agent console, click Start > Programs > GroupWise Monitor > GroupWise Monitor. The Monitor Agent console appears. "A GroupWise Monitor Jol] Configuration View Actions Reports Log Help 3] Corporate Mal = <Q NetWare Agents |) NetWare Gateways [2] -E Windows Agents 12] CEI Windows Gateways (2) lo POA 3d5h53m N/A Y Noma 3d5h49m Piovol MTA 3d5h53m 5 714 NLM Next Polt 259 seconds (HTTP: 8200 ¡Agents 2 At the Monitor Agent console, you can perform many activities, for example: ¢ Use items on the Configuration menu to configure the Monitor Agent as needed. + Use items on the View menu to choose how much and what kind of agent status information to display. 142 GroupWise 6.5 Installation Guide * Create agent groups in order to monitor related agents together. * Use items on the Reports menu to check the status of links throughout your Group Wise system and to organize status information into a format that can be e-mailed or printed. + Use items on the Actions menu to control agent polling. For more information about using the Monitor Agent console, see “Monitor” in the Group Wise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). To stop the Monitor Agent, click Configuration > Exit or close the window where the Monitor Agent is running. Monitor Web Console in Your Web Browser To display similar information in your Web browser, enter the Monitor Web console URL in your Web browser: Linux: https://network_address/gwmon/gwmonitor Windows: https://network_address/servlet/gwmonitor where network_address represents the IP address or DNS hostname of the server where your Web server runs. The Monitor Web console appears. GroupWise» Monitor 1 IN 1 Jala) (a ” 5 Corporate Mail [0] Monitored agents for "Corporate Mail.NetWare Agents” group + NetWare Agents a i Total: 2 Displayed: 1 - 2 NetWare Gateways [2 A + Windows Agents [2] Refresh | Select All | Clear All [Problem ] [Suspend ] [Resume Move] Windows Gateways [2] Name Status Status Duration Up Time Type C @ Provo1 Normal 3d5h52m 3d5h53m MTA Eee T (9) Development.Provo1 Normal 3d5h52m = 3d5h53m POA Rename Move Delete Refresh Help You can use this same URL to view the same agent status information in various wireless browsers and devices. You can perform the same monitoring activities at the Monitor Web console as you can at the Monitor Agent console. Refer to the online help in the Monitor Web console for additional information about each Monitor Web console page. For more information about using the Monitor Web console, see “Monitor” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Monitor Web Console on Your Palm OS Device To access the Monitor Web console on your Palm OS device: 1 Add the GroupWise Monitor Web Clipping Application (gwmon.pga) to your Palm OS device. The gwmon.pqa file is located in the Web server’s docs\com\novell\gwmonitor\palm\en directory. 2 Open the GroupWise Monitor Application. To do so, tap the Applications icon, tap the pick- list in the upper-right corner of the screen, select Palm.Net, then tap GroupWise Monitor. 3 Enter your login ID and password, then log in. Installing GroupWise Monitor 143 GroupWise Monitor Installation Worksheet Item 1) Platform * Linux * Windows 2) Components to Install: + GroupWise Monitor Agent + GroupWise Monitor Application 3) Monitor Agent Installation Path: Linux: /opt/novell/ groupwise/agents Windows: + c:\gwmon (default) + Other: 4) Monitor Agent Network Address: + IP address: + DNS hostname: + Port number: 8200 (default) 5) Domain Directory Path: 6) Default Monitor Agent Console Language: Explanation Mark the platform where you want to install the Monitor Agent. For more information, see “Deciding Where to Install the GroupWise Monitor Components” on page 139. Mark the components you want to install. You don't need to install both components at the same time or on the same platform. For more information, see “Deciding Where to Install the GroupWise Monitor Components” on page 139. Specify the directory path where you want the Monitor Agent software installed. For more information, see “Deciding Where to Install the GroupWise Monitor Components” on page 139. Specify the IP address or DNS hostname of the server where you plan to install the Monitor Agent. Specify the port number for the Monitor Agent to listen on. The Monitor Agent must use a unique port number. For more information, see “Monitor Agent Network Address” on page 140. Specify a domain directory where a GroupWise 6.x MTA is running. For more information, see “Domain Directory Path” on page 140. Select the default language for the Monitor Agent console Interface on the Windows server. For more information, see “Default Monitor Agent Language (Windows Only)” on page 141. 144 GroupWise 6.5 Installation Guide Item 7) Web Server: * Netscape Enterprise Server for NetWare * Apache Web Server for NetWare + Apache Web Server for Linux * Microsoft Internet Information Server (IIS) Windows * Netscape FastTrack/ Enterprise Server for Windows NT * Apache Web Server for UNIX Solaris 8) Web Server Path: 9) Web Clipping Application (PQA) URL 10) Default Web Page: * Novell page * Current page 11) Monitor Configuration File Path: Linux: /opt/novell/ groupwise Windows: + c:\novell (default) + Other: 12) Java Servlet Engine: + Use Novell Servlet Gateway + Use Tomcat Servlet Gateway + Use Other Java Servlet Engine Java Servlet Root Directory: Explanation Mark the Web server you want to use with GroupWise Monitor. For more information, see “Deciding Where to Install the GroupWise Monitor Components” on page 139. Specify the directory path to the Web server's root directory. For more information, see “Deciding Where to Install the GroupWise Monitor Components” on page 139. Specify the URL that you want built into the Web Clipping Application (PQA) that enables Palm OS devices to access the Monitor Web console. For details, see “Web Clipping Application (PQA) URL” on page 141. Select whether or not you want the Novell Web Services page to replace the Web server's default Web page. For more information, see “Web Server Default Page” on page 142. Specify the directory path where you want the Monitor configuration file installed. For more information, see “eDirectory Objects and Configuration File” on page 142. Select the Java servlet engine you want to use with Monitor. For the Tomcat Servlet Gateway or another Java servlet engine, specify the directory path to the servlet engine. For more information, see “Deciding Where to Install the GroupWise Monitor Components” on page 139. Installing GroupWise Monitor 145 Item 13) Default Monitor Web Console Language: 14) Monitor Object Configuration: * Tree: + Context: 15) LDAP Information * LDAP server IP address: * LDAP server port: * Username in LDAP format: + Password: + SSL certificate: Explanation Select the default language for the Monitor Web console Interface. For more information, see “Default Monitor Web Console Language” on page 143. Specify the tree where you are installing Monitor. Specify the context in which the Monitor Installation program should create the GroupWise Monitor and Monitor Provider objects, where configuration information is stored. For more information, see “eDirectory Objects and Configuration File” on page 142. This item applies only on Linux. List the IP address and port of an LDAP server in your system and the username and password that the Monitor Installation program can use to log in to eDirectory to create the Monitor Agent object. If you want to use an SSL connection, specify an SSL certificate file. For more information, see “LDAP Information (Linux Only)” on page 141. 146 GroupWise 6.5 Installation Guide Installing GroupWise Agents Novell® Group Wise” agents are first installed and started as part of installing a basic GroupWise system, as described in Chapter 3, “Installing a Basic GroupWise System,” on page 23. The following sections help you install additional agents as you create new domains and post offices in your growing GroupWise system. * “GroupWise Agent Overview” on page 155 * “Agent System Requirements” on page 156 + “Planning the GroupWise Agents” on page 157 * “Setting Up the GroupWise Agents” on page 161 + “What's Next” on page 173 * “GroupWise Agent Installation Worksheet” on page 174 NOTE: If you plan to install the GroupWise agents in a clustered server environment provided by Novell Cluster Services™ or Microsoft Clustering Services, see the GroupWise 6.5 Interoperability Guide (http:// www.novell.com/documentation/gw65) for additional information. GroupWise Agent Overview Each time you create a new post office, you must set up at least one Post Office Agent (POA) for it. Some of the POA’s tasks in the post office include: + Connecting GroupWise clients to mailboxes through network connections (TCP/IP, POP, IMAP) * Sending messages to other users and delivering incoming messages into mailboxes * Indexing messages and documents to support the Find feature in the Group Wise clients * Managing disk space usage in the post office and controlling the size of messages that users are allowed to send and receive Each time you create a new domain, you must set up a Message Transfer Agent (MTA) for it. Some of the MTA’s tasks in the domain include: * Routing user messages between post offices and domains * Routing administration messages throughout the GroupWise system so that databases are kept in sync ¢ Synchronizing GroupWise user information with Novell eDirectory™ user information The POA requires direct access to the post office directory. The MTA requires direct access to the domain directory. The preferred way to fulfil this requirement is to install each agent on the same server with its directory. Running an agent locally on the same server where its directory and database are located simplifies network connections, because no remote login is required. In Installing GroupWise Agents 147 addition, it reduces network traffic and protects database integrity. The following diagram illustrates direct access: Message Post Office Transfer Agent Agent È VA Q Q Domain Post Office However, if necessary, you can install the agent on a different server from its directory. This requires the agent to have a direct link (mapped drive, UNC path, or file system mount) to its directory on the remote server in order to function. The following diagram illustrates the direct links: Message Post Office Transfer Agent Agent Mapped Drive Mapped Drive UNC Path UNC Path File System Mount File System Mount Domain Post Office To route user and administration messages to the post office, the MTA requires a direct link (or direct access) to the post office directory, or a TCP/IP link to the POA for the post office. The following diagram illustrates the alternatives: Message Post Office Message Post Office Transfer Agent Agent Transfer Agent Agent TCP IP Mapped Mapped Mapped Mapped Mapped UNC UNC UNC UNC Mount Mount Mount Mount | Mount Q + Q Q Domain Post Office Domain Post Office Agent System Requirements O 32-bit/x86 processor A Any of the following server operating systems: 148 GroupWise 6.5 Installation Guide + NetWare® 4.2, NetWare 5.1, or NetWare 6.x, plus the latest Support Pack for your version of NetWare NOTE: Domains and post offices can be located on NetWare 3.12 servers, although the agents cannot run there. + SUSE? Linux Standard Server 8, SUSE Linux Enterprise Server 8, SUSE Linux Enterprise Server 9, Red Hat Enterprise Linux 3 ES, or Red Hat Enterprise Linux AS The X Window System and OpenMotif are required by the GUI GroupWise agent consoles. The agents can also run as daemons without user interfaces. * Windows NT Server, Windows 2000 Server, or Windows 2003 Server, plus the latest Service Pack for your version of Windows O Approximately 25 MB of free disk space (varies by platform) O Adequate memory to ensure acceptable performance * Approximately 10 MB of free memory (minimum for the agents to start) + Substantially more free memory for the POA depending on the number of active users, as illustrated by the table below: Concurrent Users Actual Memory Usage at Peak Time 100 active users (100-250 users in post office) 250 active users (250-500 users in post office) 500 active users (500-1000 users in post office) 1000 active users (1000-2500 users in post office) 50 MB 110 MB 125 MB 150 MB Although the Linux and Windows agent memory requirements differ slightly from the NetWare agents, you can use the figures provided for the NetWare agents to see what agent processes are most memory intensive. This can help you figure memory requirements for more complex configurations. See the following sections in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65): * “Estimating NetWare POA Memory Requirements” in “Post Office Agent” * “Estimating NetWare MTA Memory Requirements” in “Message Transfer Agent” Planning the GroupWise Agents Use the “GroupWise Agent Installation Worksheet” on page 174 to record your decisions about how to install the GroupWise agents as you review the following considerations: + + + “Selecting the Agent Platform” on page 158 “Selecting the Agent Location” on page 158 “Selecting the Agent Installation Directory” on page 159 “Gathering Domain and Post Office Information” on page 159 “Clustering the NetWare Agents” on page 159 “Configuring the Windows Agents” on page 160 “Deciding Which Languages to Install” on page 161 Installing GroupWise Agents 149 Selecting the Agent Platform The MTA and POA are available as NetWare NLM™ programs, Linux executables, and Windows executables. In general, Group Wise is most efficient if you match the agent platform with the network operating system where the post office and domain are located. For example, if a domain and post office are located on a NetWare server, then you would install the NetWare agents for them. However, this is not required. Those with mixed networks might wonder what platform combinations are possible. For more information, see the following sections in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65): + “Cross-Platform Issues in the Post Office” in “Post Office Agent” + “Cross-Platform Issues between Domains and Post Offices” in “Message Transfer Agent” GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 1: Agent Platform, mark whether you plan to install the agents on NetWare, Linux, or Windows. Review “Agent System Requirements” on page 156 to ensure that the specific server you have selected meets the listed requirements. Selecting the Agent Location Record which GroupWise agents you plan to run on the selected server (POA, MTA, or both) and whether you want to install the agents locally or remotely in relation to their directories and databases, as described in “GroupWise Agent Overview” on page 155. GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 2: Agents and Locations, mark the agents to install and their locations relative to the directories and databases they need to access. If the NetWare agents need to access their directories and databases on remote NetWare servers, you must add configuration information to the agent startup files to provide the needed access. You can choose from two access methods: + Use the /dn switch to specify the distinguished name of the agent object that was created along with the Domain or Post Office object. + Use the /user and /password switches to specify a network user ID and password for the agent to use when it accesses the remote NetWare server. GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 2: Agents and Locations, for the NetWare agents, record the startup switches and settings you'll need to add to the agent startup files after installation if you are installing the agents on a different NetWare server from where their directories and databases are located. Selecting the Agent Installation Directory The agent installation directory depends on the platform where you are installing the agents. 150 GroupWise 6.5 Installation Guide Consider these platform-specific guidelines: * NetWare: When installing the NetWare agents, we recommend you use the sys:\system directory on the NetWare server. This simplifies the use of startup files and ensures that the NLM programs are in the server’s search path. If you use a different directory, you must add that directory to the server’s search path. * Linux: The Linux agents are automatically installed to the bin and lib subdirectories under / opt/novell/groupwise/agents. * Windows: The default installation directory is c:\grpwise. However, you can install the agents to any directory you want. GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 3: Installation Path, record the directory where you want to install the GroupWise agent software. Both the MTA and the POA are installed to the specified directory. Gathering Domain and Post Office Information Record the following information about the domains and post offices for which you are installing and setting up the GroupWise agents: GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 6: Domains, record the domain name and path to the domain directory for the new domain. Under Item 7: Post Offices, record the post office name and path to the post office directory for the new post office. Domains and post offices must exist before you install the agents for them. If necessary, create the domains and post offices that you are installing the agents for. Clustering the NetWare Agents Novell Cluster Services is a server clustering system that ensures high availability and manageability of critical network resources including volumes (where GroupWise domains and post offices reside) and applications (such as the GroupWise agents). Novell Cluster Services supports failover, failback, and migration of individually managed cluster resources. The GroupWise NetWare agents can be configured to take advantage of the fault-tolerant environment provided by Novell Cluster Services if the following requirements are met: * The domains and post offices to be serviced by the NetWare agents have already been created on shared NSS volumes in the cluster. * The NetWare agents are being installed to a server that is part of the same cluster. When the agents are configured for clustering, their startup files are configured with shared volume names rather than specific server names. In addition, the POA is configured to more effectively re-establish logins with GroupWise clients when a failover or migration situation arises. Installing GroupWise Agents 151 GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 4: Configuring GroupWise Agents for Clustering, mark whether or not you want to configure the NetWare agents for clustering. If you are using clustering, under Item 11: Launch in Protected Mode, mark that you want the Agent Installation program to start the agents in Protected Mode. This is required in a clustering environment. Additional configuration of the Agent objects in ConsoleOne® is required to complete the agent setup in a clustering environment, as described in “Setting Up a Domain and Post Office in a Novell Cluster” in “Novell Cluster Services” in the GroupWise 6.5 Interoperability Guide (http:/ /www.novell.com/documentation/gw65): Configuring the Windows Agents When you install the Windows agents, you have choices about how the agents interact with the Windows operating system. * “Configuring the Windows Agents as Services” on page 160 * “Using SNMP Traps to Monitor the Windows Agents” on page 161 Configuring the Windows Agents as Services When you run the GroupWise Windows agents as services, they can start automatically and run without a user interface. GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 8: Installation Options, mark Install as Windows Services if you want to run the agents as services. When you run the Windows agents as services, they must run under a specific Windows user account. When domains and post offices are located on the same server where you are installing the agents, the agents can run under the local system account. You can also display the agent consoles when the agent software, directories, and databases are local. When domains and post offices are located on a remote server, you must specify a user with rights to access the domain and post office directories. If the Windows agents need to log in to a Windows server, provide a Windows username and password. If the Windows agents need to log in to a NetWare server, provide an existing eDirectory username and password, or create a new account for the agents, as described in “Creating a NetWare Account for Agent Access (Optional)” on page 163. GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 9: Windows Service Information, record the account the agents will run under, and if necessary, the password for the account. As with all Windows services, the Windows agents can be started automatically or manually as services each time the Windows server restarts. 152 GroupWise 6.5 Installation Guide GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 9: Windows Service Information, mark how you want the Windows agents to start each time the server is restarted. Using SNMP Traps to Monitor the Windows Agents If you want to use an SNMP manager program, such as the Management and Monitoring Services component of Novell ZENworks® Server Management, to monitor the agents, you must install some SNMP components along with the Windows agent software. GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 8: Installation Options, mark Install and Configure SNMP for GroupWise Agents if you want to use an SNMP manager program. If this option is dimmed during installation, the SNMP service has not been enabled on the Windows server where you are installing the agents. If you want to monitor the agents from an SNMP management program, the SNMP service must be enabled so you can select this option. NOTE: The NetWare and Linux agents rely on operating system components for SNMP functionality and do not require this installation option. Deciding Which Languages to Install If you have users with various language preferences, you can install the Group Wise agents in multiple languages. GROUPWISE AGENT INSTALLATION WORKSHEET Under Item 5: Languages, list the languages you want to install the agents for. By default, the agents start in the language selected for the domain. If that language has not been installed, the agents start in the language used by the operating system. If that language has not been installed, the agents start in English. Setting Up the GroupWise Agents After creating a new domain or post office, you need to configure the Agent object that was automatically created with it, then follow the setup instructions for the platform where you are installing the Group Wise agents: * “Configuring New Agent Objects in eDirectory” on page 162 + “Setting Up the GroupWise Agents on NetWare” on page 162 * “Setting Up the GroupWise Agents on Linux” on page 165 + “Setting Up the GroupWise Agents on Windows” on page 171 Installing GroupWise Agents 153 Configuring New Agent Objects in eDirectory When you create new post offices and domains, Agent objects are automatically created for them. Most agent configuration can be done after installation, but a few settings should be established before you install the agent software. In ConsoleOne: 1 Browse to and expand the eDirectory container where the new post office or domain is located to display its contents. Select the Post Office object or Domain object to display its contents. Right-click the Agent object, then click Properties to display the agent Identification page. In the Description field, type a brief description of the agent for display at the agent console. In the Platform field, select NetWare, Linux, or Windows. Click OK to save the new Agent object properties. Repeat these steps for each new post office and domain for which you are installing agents. on og A WO ND Continue with the installation instructions for the platform where you are installing the Group Wise agents. * “Setting Up the GroupWise Agents on NetWare” on page 162 * “Setting Up the GroupWise Agents on Linux” on page 165 * “Setting Up the GroupWise Agents on Windows” on page 171 Setting Up the GroupWise Agents on NetWare Complete the following tasks to set up the Group Wise NetWare agents. These tasks are designed to help you get the agents up and running as quickly as possible. + “Preparing the NetWare Server for the Agents” on page 162 ¢ “Installing the NetWare Agent Software” on page 163 * “Editing the NetWare Agent Startup Files” on page 165 Preparing the NetWare Server for the Agents Make sure the NetWare server where you plan to install the Group Wise agents has been properly prepared to run the agents: + “Obtaining a Static IP Address” on page 162 + “Creating a NetWare Account for Agent Access (Optional)” on page 163 + “Adding the NetWare Agent Installation Directory to the Server Search Path (Optional)” on page 163 Obtaining a Static IP Address The NetWare server where the GroupWise agents run should have a static IP address. DHCP should not be used to dynamically assign an IP address for it. Make sure the server where you plan to install the agents has a static IP address. 154 GroupWise 6.5 Installation Guide Creating a NetWare Account for Agent Access (Optional) When the GroupWise agents run on a different NetWare server from where their directories and databases are located, and they are not set up to authenticate through eDirectory (using the /dn startup switch), the agents must use a specific eDirectory username and password to log in to that server. To create a user for the agents to log in as: 1 In ConsoleOne, create a new user (such as GWA gents). 2 Provide a password for that user (such as GWise). 3 Grant that user the following rights to all domain, post office, and document storage directories: + Read or execute files * Write to files * Create files or directories * Erase files or directories + Modify files (rename or change attributes) + File scan 4 Add the /user and /password startup switches to the agent startup files so that the agents can log in to the remote server as the user you have created. Adding the NetWare Agent Installation Directory to the Server Search Path (Optional) If you have selected a directory other than sys:\system to install the agents to, add the agent installation directory to the server search path by adding a search command to the autoexec.ncf file. Installing the NetWare Agent Software After you have prepared the NetWare server to run the GroupWise agents, you are ready to install them. At a Windows machine: 1 Map a drive to the NetWare server where you want to install the agents. 2 Make sure you have sufficient rights to install software in the desired directory. 3 Run setup.exe at the root of the GroupWise 6.5 Administrator CD > click Install Products > Group Wise Agents > Install GroupWise Agents. or Run install.exe from the \agents subdirectory on the CD or in your software distribution directory if you have updated it with Group Wise 6.5 software. 4 Follow the on-screen instructions to install the GroupWise agents on the NetWare server, supplying the information you gathered on the “GroupWise Agent Installation Worksheet” on page 174, until you reach the Installation Complete page. Installing GroupWise Agents 155 GroupWise Agent Installation 4 =104x1 Installation Complete The GroupWise agent software has been successfully N ove l l. installed and configured. Options IV Update AUTDEXEC file IV Launch GroupWise agents now [7 Launch in Protected Mode Installation Guide Back Epi The Agent Installation program has created a grpwise.ncf file that contains the commands to start the GroupWise agents on the NetWare server whenever the server starts. Here at the end of the Agent Installation program, you can select how you want to start the agents. Update AUTOEXEC File: Select this option if you want the Agent Installation program to add the grpwise.ncf file to the NetWare autoexec.ncf file so that the agents start automatically whenever the server restarts. Launch GroupWise Agents Now: Select this option if you want the Agent Installation program to start the agents for you immediately. This is appropriate when you have installed the agents on the same server with the domain and post office directories. If you have installed the agents on a remote server from where the domain and post office directories are located, do not select this option. You must manually edit the agent startup files to configure the agents to access the remote servers. This configuration procedure is explained in “Editing the NetWare Agent Startup Files” on page 165. Launch in Protected Mode: If you want the A gent Installation program to launch the agents for you, you can choose to launch them in Protected Mode on NetWare 5.1 and later. This option also adds the protect command to the grpwise.ncf line in the NetWare autoexec.ncf file: protect grpwise.ncf This line automatically starts the agents in Protected Mode when the server restarts. 5 Select the desired agent startup options, then click Finish. If you encounter any problems starting the agents or if you chose not to have the Agent Installation program start the agents for you, refer to “Post Office Agent” and “Message Transfer Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65) for additional instructions. If you need the stop the agents, press F7-Exit at the agent console or enter unload gwpoa and unload gwmta at the NetWare server console. 6 If necessary, modify the agent startup files as described in “Editing the NetWare Agent Startup Files” on page 165, then manually start the NetWare agents by running grpwise.ncf. 7 To monitor an agent from your Web browser, view the agent Web console by supplying the IP address and port number of the agent. For example: http://172.16.5.18:1677 http://172.16.5.18:7100 156 GroupWise 6.5 Installation Guide http://172.16.5.18:7180 http://172.16.5.18:7181 When viewing the agent Web console, you can specify the POA client/server port, the MTA message transfer port, or the HTTP port you specified when you created the domain or post office. The POA client/server port and the MTA message transfer port are automatically redirected to their respective HTTP ports. Editing the NetWare Agent Startup Files The Agent Installation program creates a customized agent startup file for each domain and post office location. The first 8 characters of the post office and domain names became the names of the agent startup files, along with an agent-specific extension. For example, if the post office name is acctpo, then the POA startup file is named acctpo.poa. The Agent Installation program also customizes each startup file with the correct /home switch setting, pointing to the domain or post office directory. Each startup file also provides a comprehensive list of startup switches, with all but the /home switch commented out. You can use any ASCII text editor to set the startup switches required by the access method you recorded under Worksheet Item 2: Agents and Locations. The agent startup files are located in the agent installation directory. After modifying the startup files, use the grpwise.ncf file to start the NetWare agents from the NetWare server console. Setting Up the GroupWise Agents on Linux Complete the following tasks to set up the Linux agents. These tasks are designed to help you get the Linux agents up and running as quickly as possible and to help you manage the agents in the future. ¢ “Installing the GroupWise Agents on Linux” on page 165 + “Installing the GroupWise Agents Using the Text-Based Installation Advisor” on page 167 + “Starting the Linux Agents with a User Interface” on page 168 ¢ “Starting the Linux Agents as Daemons” on page 169 * “Monitoring the Linux Agents from Your Web Browser” on page 170 * “Using Agent Startup Files” on page 170 ¢ “Starting the Linux Agents on System Startup” on page 170 * “Stopping the Linux Agents” on page 171 Installing the GroupWise Agents on Linux 1 Open a new terminal window, then enter the following command: xhost + localhost If you cannot execute this command because the X Window System is not running on the Linux server, see “Installing the GroupWise Agents Using the Text-Based Installation Advisor” on page 167 2 Become root by entering su and the root password. 3 Change to the root of the GroupWise 6.5 for Linux Administrator CD. Installing GroupWise Agents 157 4 Start the Group Wise Installation Advisor. ./install 5 Select the language in which you want to run the Installation Advisor and install the agent software, then click OK. GroupWise 5 = z GroupWise. Novell. 9 View the Readme Y Create or update a GroupWise system ® Install Products Y Visit the Novell Group Wise Web Site a> 6 In the Installation Advisor, click Install Products > GroupWise Agents > Install GroupWise Agents. 7 When the file copy is complete, click OK. The Group Wise agent software is installed to the bin and lib subdirectories of /opt/novell/ groupwise/agents. 8 Click Configure GroupWise Agents. The agent installation and configuration steps are separate so that you can install updated agent software without needing to repeat the agent configuration steps. GroupWise Agents Configuration o) = o Introduction LI Introduction Welcome to the Group Wise Agent Configuration Program. The following agent software will be configured: LJ iti mi Message Transfer Agent(MTA): Routes messages between oO Domains/F domains, post offices, and gateways. LI will! A Post Office Agent(POA): Delivers messages to users’ mailboxes. Cancel Next 9 Review the Introduction, then click Next. 10 Accept the License Agreement, then click Next. 11 Provide the domain and post office information that the agents need: 158 GroupWise 6.5 Installation Guide 11a Click Add, select Domain, specify the domain name and domain directory, then click OK. 11b Click Add, select Post Office, specify the post office name and post office directory, then click OK. 11c Verify that the names and directories you have provided are correct, then click Next. On the Configuration Complete page, Launch GroupWise Agents on System Startup is selected by default. 12 If you do not want the agents to start automatically when the server restarts, deselect Launch GroupWise Agents on System Startup. 13 Click Exit to complete the configuration. 14 Skip to “Starting the Linux Agents with a User Interface” on page 168 or “Starting the Linux Agents as Daemons” on page 169 depending on whether or not you want a user interface on the Linux server where the agents run. Installing the GroupWise Agents Using the Text-Based Installation Advisor If you want to install the GroupWIse agents on a server where the X Window System is not running, you can use the text-based Installation Advisor. 1 Make sure you are logged in as root. 2 Change to the root of the GroupWise 6.5 for Linux Administrator CD. 3 Start the GroupWise Installation Advisor. ./install 4 Press any key to display the License Agreement. 5 Press any key to scroll through the License Agreement, then enter y to accept the License Agreement. 6 Enter 1 for GroupWise Agents. 7 Enter 1 for Install GroupWise Agents. A status bar indicates progress. 8 Enter y to configure the GroupWise agents. 9 Enter 1 to continue. 10 If you want to configure the MTA, enter 1 to specify the domain, enter the domain name, then enter the path to the domain directory. 11 If you want to configure the POA, enter 2 to specify the post office, enter the post office name, then enter the path to the post office directory. 12 Enter 3 to review the information you have provided, then press any key to continue. 13 Enter 4 to configure the agents, then press any key to exit. 14 Skip to “Starting the Linux Agents as Daemons” on page 169. Starting the Linux Agents with a User Interface 1 Make sure you are logged in as root. 2 Change to the GroupWise agent bin directory. cd /opt/novell/groupwise/agents/bin Installing GroupWise Agents 159 3 Enter the following command to start the MTA: Syntax: ./gwmta --show --home domain directory & Example: ./gwmta --show --home /gwsystem/domlnx & The --show startup switch starts the MTA with an agent console interface similar to that provided for the NetWare and Windows MTA. This user interface requires that the X Window System and OpenMotif be running on the Linux server. The --home startup switch specifies the domain directory and is required to start the MTA. The ampersand (&) causes the MTA to run in the background, so that the terminal window you started it in is again available for use. ©% Research.Provo3 - GroupWise POA File Configuration Log Statistics Actions Help Research,Provo3 Up Time: 3 Days 8 Hrs 13 Mins Groupllise Post Office Agent Statistics C/S Requests; 3731 Total Messages: 0 2 || Requests Pending: 0 Undeliverable; 0 o || User Timed Out; 2 Problem Messages; Check disk space every; 5 (mins) Perform disk check actions no more than every: 2 (hrs) Event #1 : Default POA Disk Check Event Free disk space threshold: 20MB Action Set #1 ; Default POA Disk Check Actions Mail message to administrator; upon failure Type of database files to check: User Msg Doc Database check action? Reduce Delete temporary/backup files older than (days): 1 Gag Gan Database Maintenance Events? Event #1 ¢ Default POA Mailbox/Library Maintenance Event to perform action(s): F Time to perform action(s); Midnight (12am) Action Set #1 : Default POA Mailbox/Library Maintenance Actions Tupe of database files to check: User Msg Doc Database check action: Analuze/Fixup Level of database analysis and verification: Structural Delete temporary/backup files older than (days): 7 Guardian database: OK 13 3 13 3 3 3 3 3 888888888888888888888 tt 883383333333333333338 passssssaeaseaea sesta gEseeReseoReseoReeese The status messages displayed on the MTA agent console are also written to the MTA log file (mmddmta.nnn) in the /var/log/novell/groupwise/domain.mta directory. The log file name includes the month and day when it was created, along with an incrementing extension to accommodate multiple log files on the same day. In ConsoleOne, you can see that the MTA has updated the domain database because the Version field on the Domain object shows 6.5 when the update is complete. Wait until the domain database has been updated before you start the POA. Use the following command to start the POA: Syntax: ./gwpoa --show --home post office directory & Example: ./gwpoa --show --home /gwsystem/polnx & 160 GroupWise 6.5 Installation Guide S Research.Provo3 - GroupWise POA File Configuration Log Statistics Actions Help Research,Provo3 Up Time; 3 Days 8 Hrs 13 Mins GroupWise Post Office Agent Status Statistics Processing * Busy: 0 : 0 C/S Requests: 3731 Total Messages: 0 User Connections: 2 | Requests Pending: 0 Undeliverable: 0 File Queues: o || User Timed Out: 2 Problem Messages: 0 00:00:01 803 Check disk space every: 5 (mins) A Perform disk check actions no more than every? 2 (hrs) Event #1 + Default POA Disk Check Event Free disk space threshold; 20MB Action Set #1 ; Default POA Disk Check Actions Mail message to administrator: upon failure Type of database files to check: User Msg Doc Database check action: Reduce Delete temporary/backup files older than (days): 1 aa 1 51 51 51 51.51 51 51 Database Maintenance Events: Event #1 : Default POA Mailbox/Library Maintenance Event Days to perform action(s); F Time to perform action(s): Midnight (12am) Action Set #1 : Default POA Mailbox/Library Maintenance Actions Type of database files to check: User Msg Doc Database check action: Analyze/Fixup Level of database analysis and verification: Structural Delete temporary/backup files older than (days): 7 Bee ee ee ee ee eee ees sessssasaesa sese sa CASAS Sesssssssssssesseses g 88888888888888888888 E E 2 Guardian database: OK TTSS j The status messages displayed on the POA agent console are also written to the POA log file (mmddpoa.nnn) in the /var/log/novell/groupwise/post_office.poa directory. The log file name includes the month and day when it was created, along with an incrementing extension to accommodate multiple log files on the same day. In ConsoleOne, you can see that the POA has updated the post office database because the Version field on the Post Office object shows 6.5 when the update is complete. If you encounter any problems starting the agents, see “Post Office Agent” and “Message Transfer Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65) for additional instructions. After the post office database has been updated, users can connect to the post office using either the Cross-Platform client or the Windows client. 6 Skip to “Monitoring the Linux Agents from Your Web Browser” on page 170 Starting the Linux Agents as Daemons 1 Make sure you are logged in as root. 2 Change to the /etc/init.d directory. 3 To start the Linux agents, enter the following command: ./grpwise start 4 To confirm that the agents have started, enter the following command: ps -eaf | grep gw This lists all GroupWise agent process IDs. 5 Continue with Monitoring the Linux WebAccess Agent from Your Web Browser. Monitoring the Linux Agents from Your Web Browser To monitor an agent from your Web browser, view the agent Web console by supplying the IP address and port number of the agent. For example: http://172.16.5.18:1677 http://172.16.5.18:7100 http://172.16.5.18:7180 http://172.16.5.18:7181 Installing GroupWise Agents 161 When viewing an agent Web console, you can specify the client/server port for the POA, the message transfer port for the MTA, or the HTTP port you specified when you created the post office or domain. The POA client/server port and the MTA message transfer port are automatically redirected to their respective HTTP ports. GroupWise 6.5.1 POA - Research.Proved Status | Configuration | Environment | Log Files | Scheduled Events | MTP Status | Help GroupWise Post Office Agent Up Time: 0 Days 0 Hours 28 Minutes CIS Users 1 Application Connections 1 Physical Connections 0 Priority Queues 0 Normal Queues 0 GWCheck Auto Queues 0 GWCheck Scheduled Queues 0 hread Status u CIS Handler Threads 6 0 Message Worker Threads 6 0 GW/Check Worker Threads 4 0 Message Transfer Status Open For instructions on protecting the agent Web consoles with passwords see “Using the POA Web Console” in “Post Office Agent” and “Using the MTA Web Console” in “Message Transfer Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/ gw65). Using Agent Startup Files The agent startup files are created by the Installation Advisor in the /opt/novell/groupwise/agents/ share directory and are named after the domain or post office that the agent services. Because the Installation Advisor prompted you for domain and post office names and directories, it can set the --home startup switches in the MTA and POA startup files. In the bin directory where the agent executables are located, you could start the agents with commands similar to the following examples: ./gwmta --show @../share/LnxDom.mta ./gwpoa --show @../share/LnxPost.poa Starting the Linux Agents on System Startup If you selected Launch GroupWise Agents on System Startup in the Agent Installation program, the Agent Installation program configured your system so that the agents would start automatically each time you restart your server. The Agent Installation program always creates a grpwise startup script in /etc/init.d for starting the agents. To enable automatic startup, the Agent Installation program also creates symbolic links named S99grpwise in the rc3.d and rc5.d directories so that the agents load on restart into level 3 or 5, depending on the configuration of your Linux system. When the grpwise script runs and starts the agents, it reads the agent startup files in /opt/novell/ groupwise/agents/share to check for configuration information provided by startup switches. Because the --show switch cannot be used in the startup files, the agents never run with agent console interfaces when started automatically when the server restarts. Stopping the Linux Agents When you use the --show startup switch to start the MTA and POA, you can stop them from the agent console interface. 1 Click File > Exit > Yes. 162 GroupWise 6.5 Installation Guide When you start the GroupWise agents with the grpwise script, you can also use the script to stop them. 1 Make sure you are logged in as root. 2 Change to the /etc/init.d directory. 3 To stop the GroupWise agents, enter the following command: ./grpwise stop 4 To confirm that the agents have stopped, enter the following commands: ps -eaf | grep gwmta ps -eaf | grep gwpoa The only gwmta and gwpoa process IDs you should see listed are the ones for the grep commands. When you start the Group Wise agents manually (without using the grpwise script), use the standard Linux kill command to stop them. 1 Make sure you are logged in as root. 2 Determine the process IDs (PIDs) of the MTA and POA: ps -eaf | grep gwmta ps -eaf | grep gwpoa The PIDs for all gwmta and gwpoa processes are listed. 3 Kill the first process listed for each agent: Syntax: kill PID Example: kill 1483 kill 1892 It might take a few seconds for all agent processes to terminate. 4 Repeat the ps commands to verify that the agents have stopped. Setting Up the GroupWise Agents on Windows Complete the following tasks to set up the Windows agents. These tasks are designed to help you get the Windows agents up and running as quickly as possible: * “Preparing the Windows Server for the Windows Agents” on page 172 + “Installing the Windows Agent Software” on page 172 Preparing the Windows Server for the Windows Agents Make sure the Windows server where you plan to install the Group Wise Windows agents has been properly prepared to run the agents: + “Obtaining a Static IP Address” on page 172 * “Mapping Drives to Post Offices and Domains” on page 172 * “Creating a Windows User Account for Remote Access (Optional)” on page 172 + “Enabling SNMP (Optional)” on page 172 Installing GroupWise Agents 163 Obtaining a Static IP Address The Windows server where the GroupWise Windows agents run should have a static IP address. DHCP should not be used to dynamically assign an IP address for it. Make sure the server where you plan to install the Windows agents has a static IP address. Mapping Drives to Post Offices and Domains The POA requires direct access to the post office directory and the MTA requires direct access to the domain directory. If the agents are not installed on the same server where their directories are located, make sure the server has drives mapped to all locations where the agents need access. After installation, the agents can access their directories using either mapped drives or UNC paths. However, mapped drives are required during installation so that the agent startup files can be set up properly. Creating a Windows User Account for Remote Access (Optional) If you specified a new Windows username and password under Worksheet Item 9: Windows Services Information, create the new Windows user account so it is ready when you start the agents for the first time. Follow the instructions for your Windows version: * In Windows NT, click Start > Programs > Administrative Tools > User Manager to create a new user. * In the Control Panel of Windows 2000, double-click Users and Passwords to add a new user. Grant the user Full Control rights in the domain and post office directories. Enabling SNMP (Optional) If you want to monitor the GroupWise Windows agents from an SNMP manager program, such as the Management and Monitoring Services component of Novell ZENworks Server Management, SNMP must be enabled on the Windows server where the agents are installed. If it is not already enabled, you should enable it before you run the Agent Installation program. Follow the instructions for your Windows version: * Inthe Control Panel in Windows NT, double-click Network > click Services > Add > double- click SNMP. * In the Control Panel in Windows 2000, double-click Add/Remove Programs > click Add/ Remove Windows Components > double-click Management and Monitoring Tools > select Simple Network Management Protocol. Installing the Windows Agent Software 164 After you have prepared the Windows server to run the Group Wise Windows agents, you are ready to install them. At the Windows server where you want to install the Windows agents: 1 Make sure you have mapped drives to all domain and post office directories for which you are installing agents. 2 Run setup.exe at the root of the GroupWise 6.5 Administrator CD > click Install Products > Group Wise Agents > Install GroupWise Agents. or Run install.exe from the \agents subdirectory on the CD or in your software distribution directory if you have updated it with Group Wise 6.5 software. GroupWise 6.5 Installation Guide What’s Next 3 Follow the on-screen instructions to install the GroupWise agents on the Windows server, supplying the information you gathered on the “GroupWise Agent Installation Worksheet” on page 174, until you reach the Installation Complete page. Choose whether or not you want the Agent Installation program to start the agents for you immediately, then click Finish. If you encounter any problems starting the agents or if you chose not to have the Agent Installation program start the agents for you, see “Post Office Agent” and “Message Transfer Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/ gw65) for additional instructions. If you need to stop the agents and they are running as applications in their own windows, click File > Exit in each window. If they are running as Windows services, open the Services window (from the Control Panel or Administrative Tools), right-click each agent service, then click Stop. To monitor an agent from your Web browser, view the agent Web console by supplying the IP address and port number of the agent. For example: http://172.16.5.18:1677 http://172.16.5.18:7100 http://172.16.5.18:7180 http://172.16.5.18:7181 When viewing the agent Web console, you can specify the POA client/server port, the MTA message transfer port, or the HTTP port you specified when you created the post office or domain. After you have created new domains and post offices, and installed the agents for them, you can complete their configuration by: * Refining the configuration of the agents to meet the specific needs of the new domains and post offices. See “Post Office Agent” and “Message Transfer Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). * Refining the configuration of the new domains and post offices. See “Post Offices” and “Domains” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). + Adding users to the new post offices. See “Users” in the Group Wise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Installing GroupWise Agents 165 GroupWise Agent Installation Worksheet Item 1) Agent Platform: * NetWare * Linux * Windows 2) Agents and Locations: POA: + Local to post office * Different server from post office /dn setting (NetWare only) MTA: * Local to domain + Different server from domain /dn setting (NetWare only) 3) Installation Path: 4) Configure NetWare Agents for Clustering: Yes | No 5) Languages: 6) Domains: * Domain name: * Path to database: 7) Post Offices: * Post office name: * Path to database: Explanation Mark the platform where you are installing the GroupWise agents. Mark the agents you want to install and where you want to install them. On NetWare, if you want to install the agents on a server different from where their directories and databases are located, specify the settings for the /dn startup switches the agents can use to access the remote servers. For more information, see “Selecting the Agent Location” on page 158. Specify the directory where you want to install the agent software. For more information, see “Selecting the Agent Installation Directory” on page 159. This item applies only if you are installing the NetWare agents. Mark whether or not you want to optimize the NetWare agents for use with Novell Cluster Services. For more information, see “Clustering the NetWare Agents” on page 159. List the languages you want to install. For more information, see “Deciding Which Languages to Install” on page 161. List the domains you are installing the MTA for. For more information, see “System and Domain Names” on page 28 and “Domain Directory” on page 29. List the post offices you are installing the POA for. For more information, see “Post Office Name” on page 33 and “Post Office Directory” on page 33. 166 GroupWise 6.5 Installation Guide Item 8) Installation Options: + Install GroupWise agent software: Yes | No * Install and configure SNMP for GroupWise agents: Yes | No + Install as Windows services: Yes | No 9) Windows Service Information: Account type: * Use local system account Allow service to interact with desktop: Yes | No + Use this Windows user account: User name: Password: Startup type: + Automatic * Manual + Disabled 10) Launch GroupWise Agents Now: Yes | No 11) Launch in Protected Mode: Yes | No Explanation This item applies only if you are installing the Windows agents. Mark the installation options you want when you install the Windows agents. For more information, see “Selecting the Agent Location” on page 158, “Using SNMP Traps to Monitor the Windows Agents” on page 161, and “Configuring the Windows Agents as Services” on page 160. This item applies only if you are installing the Windows agents. If you are installing the Windows agents as services, mark the type of account they can use to log in. If needed, specify the Windows user account they can run under. Also mark whether you want them to be started automatically or manually each time the Windows server restarts. For more information, see “Configuring the Windows Agents as Services” on page 160. Mark whether or not the Agent Installation program can start the agents for you at the end of the installation process. This item applies only if you are installing the NetWare agents. Mark whether or not you want the Agent Installation program to start the NetWare agents in Protected Mode on NetWare 5.1 or above. Installing GroupWise Agents 167 168 GroupWise 6.5 Installation Guide Installing the GroupWise Windows and Cross- Platform Clients The following sections assist you with assigning GroupWise accounts to users and with installing the Novell® Group Wise” 6.5 Windows client and the Group Wise 6.5 Cross-Platform client. * “GroupWise Client Overview” on page 177 * “GroupWise Client Workstation Requirements” on page 177 * “Planning Your GroupWise Client Installation” on page 178 + “Setting Up the GroupWise Client” on page 179 GroupWise Client Overview Each user with a GroupWise account has a mailbox in a post office. In a corporate workplace environment, GroupWise users with Windows workstations can run the GroupWise Windows client to access their mailboxes and to send and receive mail. GroupWise users with Linux or Macintosh workstations can run the Group Wise Cross-Platform client. Group Wise users can also access their mailboxes via a Web browser, WAP-enabled wireless telephone, Palm OS device, or Windows CE device by using the GroupWise WebAccess client. For information about WebAccess, see Chapter 5, “Installing GroupWise WebAccess,” on page 99. The GroupWise Windows client provides a full set of features, the GroupWise WebAccess client provides a similar but more limited set of features, and the GroupWise Cross-Platform client provides a basic set of features. Subsequent releases of the Cross-Platform client will include additional features. GroupWise Client Workstation Requirements GroupWise Windows Client O Any of the following Windows versions: * Windows 98 on a Pentium 133 or higher with at least 48 MB RAM * Windows NT on a Pentium 133 or higher with at least 64 MB RAM * Windows 2000 on a Pentium 200 or higher with at least 128 MB RAM * Windows XP on a Pentium 300 or higher with at least 128 MB RAM O 60 MB of free disk space to install the GroupWise Windows client Installing the GroupWise Windows and Cross-Platform Clients 169 GroupWise Cross-Platform Client A Any of the following desktop operating systems: + SUSE? Linux Desktop, SUSE Linux 8.2, or SUSE Linux 9 Professional, plus the KDE desktop or the GNOME desktop + Red Hat 9 or Red Hat Enterprise 3 WS, plus the GNOME desktop * Macintosh OS 10.3 (Panther) O Java Virtual Machine (JVM) 1.4.2 or later O 40 MB of free disk space to install the GroupWise Cross-Platform client Planning Your GroupWise Client Installation + “Assigning GroupWise Accounts to Users” on page 178 + “System-Wide Rollouts” on page 179 Assigning GroupWise Accounts to Users After you’ve finished your basic Group Wise system setup, you need to add users to the post office before they can log in to a GroupWise client. To do so, follow the instructions in one of the following sections: + “Assigning GroupWise Accounts to eDirectory Users” on page 178 + “Assigning GroupWise Accounts to Non-eDirectory Users” on page 178 Assigning GroupWise Accounts to eDirectory Users To give an eDirectory™ user a GroupWise account on the post office: 1 In ConsoleOne®, right-click the user you want to give an account to, then click Properties. 2 Click the GroupWise tab to display the GroupWise Account page. 3 In the Post Office field, click the Browse button to select the post office. 4 Inthe Mailbox ID field, enter the name the user will use when logging in to his or her mailbox. The field defaults to the eDirectory username. 5 Click OK. Assigning GroupWise Accounts to Non-eDirectory Users You give a non-eDirectory user a GroupWise account on a post office by adding the user to eDirectory as a GroupWise external entity. To add a user as a GroupWise external entity: 1 In ConsoleOne, right-click the container where you want to create the GroupWise external entity, click New, then click Object to display the New Object dialog box. 2 In the list, select GroupWise External Entity, then click OK to display the Create Group Wise External Entity dialog box. 3 Define the following properties: 170 GroupWise 6.5 Installation Guide GroupWise Object ID: Enter the user’s GroupWise ID. The user’s ID, along with the user’s post office and domain, provide the user with a unique name within the GroupWise system. Last Name: Enter the user’s last name. GroupWise Post Office: Select the post office where you want the user’s mailbox. External Network ID: Enter the user’s network ID for the network that he or she logs in to. Define Additional Properties: Select this option so that you can define additional information such as the user’s first name. The user’s first name appears in the Group Wise Address Book. Create Another External Entity: As soon as you select Define Additional Properties, this option becomes unavailable. Repeat Step 1 through Step 3 if you need to create additional GroupWise external entities. 4 Click Create. 5 Enter the user’s first name in the Given Name field. 6 Fill in any other fields you want, then click OK. The user is given a Group Wise account on the post office you selected and can access his or her mailbox through the GroupWise client. Logging in to GroupWise as a Non-eDirectory User Because non-eDirectory users do not log in to eDirectory, the GroupWise clients cannot use the Group Wise information in eDirectory to automatically log in to the users’ post office. When a non- eDirectory user starts a Group Wise client for the first time, he or she is prompted for a Group Wise user ID and post office location (IP address and port number). You need to provide non-eDirectory users with this information. If you don’t want to provide non-eDirectory users with the post office information, you can automate the login process by creating a GroupWise name server. A GroupWise name server is a DNS hostname entry that defines the TCP/IP address of the POA. During startup, the GroupWise client automatically looks for the GroupWise name server in DNS. For information about creating a GroupWise name server, see “Post Office Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). System-Wide Rollouts For a system-wide rollout of the GroupWise client software, you might want to consider alternatives to each user installing from the CD or the software distribution directory. For the GroupWise Cross-Platform client, you can use Ximian® Red Carpet™ for a system-wide rollout. For the GroupWise Windows client, if you have Novell ZENworks® Desktop Management, you can use it, along with the preconfigured .aot files included with GroupWise 6.5, to distribute the client. Or, you can have a login script run the client setup program with a response file to perform a silent install on workstations. For more information about these and other installation methods, see “Client” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Installing the GroupWise Windows and Cross-Platform Clients 171 Setting Up the GroupWise Client + “Setting Up the GroupWise Windows Client” on page 179 * “Setting Up the GroupWise Cross-Platform Client” on page 181 Setting Up the GroupWise Windows Client + “Installing the Windows Client” on page 180 + “Starting the Windows Client” on page 180 Installing the Windows Client 1 At the user’s workstation, insert the GroupWise 6.5 Client CD in the CD drive. or Map a drive to the client files in the software distribution directory. During the installation of your Group Wise system, the client files were copied to the software distribution directory on your server. For example, if you accepted the default z:\grpwise\software as your target, the client software was copied to z:\grpwise\software\client\win32. The setup program (setup.exe) can be run from the software distribution directory. In order to run this setup program, users require rights to client\win32 in the software distribution directory. The minimum rights required are Read and File Scan. 2 From the Windows taskbar, click Start > Run. 3 Browse to the GroupWise 6.5 Client CD or the client\win32 directory in the software distribution directory, then select setup.exe. 4 Click OK, follow the prompts until you reach the Setup Options screen, then click one of the following options: Workstation Install: Allows the user to run GroupWise from the network, which saves disk space on the user's hard drive. Standard Install: Installs all of the client files on the user’s hard drive. This option is required when the computer will run GroupWise in Caching or Remote mode. See “Client” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65) for more information about setting up GroupWise Remote and Caching modes. 5 Click the Browse button to select a different Destination Folder path or click Next to select the default. 6 Make sure each component you want to install is selected, then click Next. GroupWise: This component is required. Internet Browser Mail Integration: Sets Group Wise to be the default e-mail program on the workstation, so that whenever the user clicks an e-mail link on a Web page or chooses the Mail command in the browser (Internet Explorer 3.x and higher, Netscape Navigator 4.03-4.08), Group Wise starts. GroupWise Tip of the Day: The Tip of the Day displays different hints about using GroupWise. A new tip is displayed each time GroupWise is started. The user can disable Tip of the Day at any time. 7 Continue to follow the prompts and select the options you want. When the setup program has completed, a shortcut to run Group Wise appears on the user's desktop. 172 GroupWise 6.5 Installation Guide Starting the Windows Client At startup, the GroupWise client needs to know the location (IP address/hostname and port number) of the user’s post office. There are three ways that the client can get this information: + If the user is logged into eDirectory, the GroupWise client can read eDirectory for the post office’s location. ¢ Ifthe user is not logged into eDirectory, the GroupWise client can use a GroupWise name server to get the user’s post office location. A GroupWise name server is a DNS hostname entry that defines the IP address of the post office’s POA. During startup, the Group Wise client automatically looks for the GroupWise name server in DNS. For information about creating a GroupWise name server, see “Post Office Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). + The user can provide the post office location when prompted. To start the Group Wise client for the first time: 1 Double-click the GroupWise icon on the Windows desktop. 2 Enter the password and post office address information, then click OK. Setting Up the GroupWise Cross-Platform Client + “Setting Up the GroupWise Cross-Platform Client on Linux” on page 181 * “Setting Up the GroupWise Cross-Platform Client on Macintosh” on page 182 Setting Up the GroupWise Cross-Platform Client on Linux + “Installing the Cross-Platform Client on Linux” on page 181 * “Starting the Cross-Platform Client on Linux” on page 182 Installing the Cross-Platform Client on Linux 1 Open a new terminal window, then enter the following command: xhost + localhost In the same window, become root by entering su and the root password. Change to the root of the GroupWise 6.5 for Linux Cross-Platform Client CD. Enter ./install. a a WIN Select the language in which you want to run the Installation Advisor and install the Cross- Platform client software, then click OK. 6 In the Installation Advisor, click Install Products > Install GroupWise Client. The GroupWise Client is installed to the bin and lib subdirectories of /opt/novell/groupwise/ client. 7 When the installation is complete, click OK. You can also install the Cross-Platform client by changing to the client/linux directory on the GroupWise 6.5 for Linux Cross-Platform Client CD, then running the .rpm. Installing the GroupWise Windows and Cross-Platform Clients 173 Starting the Cross-Platform Client on Linux 1 At the command line, change to the /opt/novell/groupwise/client/bin directory. 2 Enter the following: . /groupwise 3 Specify the username, password, and server information, then click OK. For your convenience, a Cross-Platform client icon is automatically created on your desktop. Setting Up the GroupWise Cross-Platform Client on Macintosh Installing the Cross-Platform Client on Macintosh 1 Browse to the GroupWise.app.sit file on the GroupWise 6.5 for Linux Cross-Platform Client CD. 2 Double-click the GroupWise.app.sit file to install the Cross-Platform client software. The installation process adds a GroupWise Cross-Platform client icon to your desktop. Starting the Cross-Platform Client on Macintosh 1 Double-click the GroupWise Cross-Platform client icon to start the Cross-Platform client. 2 Specify the username, password, and server information, then click OK. What’s Next For information about using the features in the GroupWise Windows and Group Wise Cross- Platform clients, click Help > Help Topics, or Help > User Guide in the client. The user guides are both available on the GroupWise 6.5 documentation Web site (http://www.novell.com/ documentation/gw65/index.html). 174 GroupWise 6.5 Installation Guide Installing GroupWise Messenger Novell® GroupWise® Messenger is a corporate-based, secure instant messaging solution that supports instant messaging, presence, and archiving of conversations. The Messenger client integrates with the GroupWise client to provide access to instant messaging features from with the Group Wise client. GroupWise Messenger is installed separately from GroupWise and does not rely on your Group Wise system. All Messenger information is stored in eDirectory, not in Group Wise databases. For information, see the Novell GroupWise Messenger Installation Guide (NovellMessengerlnstallationGuide.pdf) in the \server\docs\en directory on the Novell GroupWise Messenger CD. Installing GroupWise Messenger 175 176 GroupWise 6.5 Installation Guide Update Chapter 10, “What's New in GroupWise 6.5 for Linux,” on page 179 Chapter 11, “What's New in GroupWise 6.5,” on page 181 Chapter 12, “Understanding the Update Process,” on page 205 Chapter 13, “Preparing Your GroupWise System,” on page 211 Chapter 14, “Updating Your GroupWise 6.x System to Version 6.5,” on page 213 Chapter 15, “Updating Your GroupWise 5.x System to Version 6.5,” on page 229 Chapter 16, “Updating an Evaluation GroupWise System to a Fully Licensed System,” on page 231 Chapter 17, “Moving Your Existing GroupWise System to Linux,” on page 233 Update 177 178 GroupWise 6.5 Installation Guide 1 0 What's New in GroupWise 6.5 for Linux GroupWise® 6.5 for Linux is GroupWise 6.5 Support Pack 1 running on Linux. It includes all the standard GroupWise components, plus a new client: * GroupWise System on Linux: The GroupWise Installation Advisor helps you create a new Group Wise system on your Linux server. GroupWise Administration on Linux: You can install the GroupWise Administrator snap- ins to the Linux version of ConsoleOne® to administer GroupWise domains and post offices located on Linux, NetWare®, and Windows servers. GroupWise Agents on Linux: All the GroupWise Agents (Post Office Agent, Message Transfer Agent, Internet Agent, WebAccess Agent, and Monitor Agent) run on Linux as daemons that can start automatically when the server restarts. The POA, MTA, and Internet Agent can be monitored from their agent consoles on the servers where they run. All the agents can be monitored using their Web consoles. GroupWise Cross-Platform Client on Linux and Macintosh: The GroupWise Cross- Platform client provides the same look and feel as the GroupWise Windows client and is available for use on Linux and Macintosh. The initial release includes most major features of the Windows client. Future releases will bring it even closer to full feature parity with the Windows client. For a list of Linux-specific updates to this GroupWise 6.5 Installation Guide, see Appendix C, “Documentation Updates,” on page 257. What’s New in GroupWise 6.5 for Linux 179 180 GroupWise 6.5 Installation Guide 1 1 What's New in GroupWise 6.5 Novell? Group Wise” 6.5 provides substantial improvements over GroupWise 6 in five key areas: + Expanded Client Features: The Group Wise client has an updated look and feel. The new Contacts folder provides access to the Freguent Contacts address book in the Address Book or any personal address book of your choice. From the Contacts folder, you can view, create, and modify contacts, resources, organizations, and groups. The new Checklist folder provides an area to create a personal task list. You can move any items to this folder, arrange them in the order you want, and check them off as you complete them. In addition, you can view any folder as a Checklist, allowing you to reorder messages and other mailbox items into a task list. You can assign color-coded categories messages, appointment, contacts, and so on and edit the displayed subject of any item, allowing you to more efficiently manage your mailbox. Improved Security: Secure Sockets Layer (SSL) connections can now be required by the administrator for all client access (GroupWise, POP3, and IMAP4) to Group Wise mailboxes. In addition, the Internet Agent and the WebAccess Agent can connect to post offices using SSL connections. Spam Handling: The GroupWise 6.5 client has a new Junk Mail Handling feature that lets users quickly control unwanted Internet e-mail messages (spam) with block lists and by automatically filing in the Junk Mail folder all messages from senders that are not in your personal address books (including Frequent Contacts). In addition, the Internet Agent can be configured to reject messages from known open relay hosts and spam hosts. Combined, these features protect users from seeing unwanted messages in their Group Wise mailboxes. Virus Scanning: By integrating third-party software into Group Wise as trusted applications, you can scan messages and attachments for viruses and prevent virus damage to your system. Instant Messaging: Novell GroupWise Messenger is a corporate-based, secure instant messaging solution that supports instant messaging, presence, and archiving of conversations. Group Wise Messenger must be installed separately from GroupWise. For information, see the Novell Group Wise Messenger Installation Guide (NovellMessengerlnstallationGuide.pdf) in the \server\docs\en directory on the GroupWise Messenger 1.0 CD. For a complete listing of all major enhancements and new features in the Group Wise components, please refer to the following sections: + + + + “Group Wise Administration” on page 182 “Group Wise Agents” on page 188 “Group Wise Client” on page 189 “Group Wise Internet Agent” on page 194 “GroupWise WebAccess” on page 197 “Group Wise Monitor” on page 202 What's New in GroupWise 6.5 181 GroupWise Administration Group Wise administration includes the following enhancements and new features. Changes included in GroupWise 6.5 are indicated by (v6.5). Changes included in GroupWise 6.5 Support Pack 1 are indicated by (v6.5 SP1). + + + + “User Move Status Utility (v6.5)” on page 182 “Recover Deleted Account Utility (v6.5)” on page 182 “Internet Addressing Changes (v6.5)” on page 183 “GroupWise View Enhancements (v6.5)” on page 184 “System Preferences Enhancements (v6.5)” on page 184 “Client Options Updates (v6.5)” on page 185 “Trusted Applications (v6.5)” on page 186 “User Description Display (v6.5)” on page 186 “GroupWise / eDirectory Associations (v6.5)” on page 186 “Multiple Account Deletion (v6.5)” on page 187 “Mailbox Auditing Information Display (v6.5)” on page 187 “Link Configuration Tool Enhancement (v6.5)” on page 187 “Message Retention Service for Trusted Applications (v6.5 SP1)” on page 188 “DirXML Driver Warnings (v6.5 SP1)” on page 188 User Move Status Utility (v6.5) The User Move Status utility in ConsoleOne® (Tools menu > GroupWise Utilities > User Move Status) helps you track progress as you move users from one post office to another. Using the User Move Status utility, you can: + + + + + + List users that are currently being moved and filter the list by domain, post office, and object. View the current status of the move for each object and see any errors that have occurred. Immediately retry a move where some of the information on the user inventory list failed to arrive at the destination post office. By default, the POA automatically retries every 12 hours for seven days to move all the information included on the user inventory list. Stop the POA from continuing its automatic retries. Restart (from the beginning) a move that has stopped before successful completion. Refresh the list to display current move status and clear completed moves from the list. For more information, see “Monitoring User Move Status” in “Users” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Recover Deleted Account Utility (v6.5) If you have a reliable backup procedure in place, you can restore recently deleted user and resource accounts in ConsoleOne (Tools menu > GroupWise Utilities > Recover Deleted Account). After the account has been re-created, you then restore the corresponding mailbox and its contents 182 GroupWise 6.5 Installation Guide (Tools menu > GroupWise Utilities > Backup/Restore Mailbox) to complete the process. Membership in distribution lists and ownership of resources must be manually re-established. For complete instructions, see “Recovering Deleted GroupWise Accounts” in “Databases” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Internet Addressing Changes (v6.5) The following changes have been made for Internet addressing: * “Allowed Address Formats” on page 183 + “Free Form User Address for Internet Addressing Override” on page 183 * “Prompt to Synchronize eDirectory E-Mail Address Attribute” on page 183 + “IDomains for External Objects” on page 183 Allowed Address Formats At the system level, you can select which address formats are allowed when receiving messages (for example, FirstName.LastName@InternetDomainName, UserID@InternetDomainName, and so forth). You can override these allowed address formats at the domain, post office, or user level. For example, you could allow all address formats at the system level; however, for a user named John Smith, you could override the settings to enable the user to receive messages as jsmith and john.smith, but not allow smith.john or jsmith.po.domain. You set system-level address formats in the Internet Addressing dialog box (ConsoleOne > Tools menu > GroupWise System Operations > Internet Addressing. For more information, see “Planning Internet Addressing” in “System” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Free Form User Address for Internet Addressing Override For the Internet Address override at the user level, you can enter the user address in any form as long as all characters are RFC compliant (no spaces, commas, etc.). This eliminates the need to create gateway aliases for Internet addresses. This option is set on the User object’s Group Wise Internet Addressing page in ConsoleOne. For more information, see “Changing a User's Internet Addressing Settings” in “Users” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Prompt to Synchronize eDirectory E-Mail Address Attribute If you change your Internet addressing options (for example, you change your preferred address format), you are prompted to update the eDirectory E-Mail Address attribute for all affected users. This prevents out-of-date e-mail address information in eDirectory. For a large system, the update process might take several minutes. A progress dialog box is displayed. IDomains for External Objects You can specify an Internet domain (IDomain) for any external (non-Group Wise) domains, post offices, and users defined in your system. Use the GroupWise Internet Addressing page on the Domain, Post Office, or User object. What's New in GroupWise 6.5 183 GroupWise View Enhancements (v6.5) The GroupWise View in ConsoleOne, which is displayed in the right pane when you select GroupWise System in the left (tree) pane, has been enhanced as follows: * Column Display and Order: For each view (Users, Distribution Lists, Gateways, Post Offices, and so forth), you can determine which columns are displayed and the order in which they are displayed. To edit the columns for a view, select Group Wise System in the left (tree) pane, select the view (for example, Users), click the View menu, then click Edit Columns to display the Select GroupWise View Columns dialog box. Use the dialog box to select the columns to display and their display order. Column Widths: You can change column widths in a view by dragging the right or left edge of the column label. Persistent Changes: Changes (width, order, last view) are preserved from one session to the next. For example, if you last used the Distribution Lists view, the next time you start ConsoleOne and open the GroupWise View, the Distribution Lists view is displayed. If the last-used view is not applicable (for example, you had the Gateways view open and when the new ConsoleOne session starts you select a Post Office object), the GroupWise View defaults to the Users view. Searching: When listing users in the GroupWise view, you can search for a complete user name (both first name and last name) by using a comma as a delimiter between the names. A space after the comma is optional. For example, if the user list displays first names in the first column and last names in the second column, you can type John,Smith to go directly to that user name, rather than searching on “John” and then scrolling down through several other Johns until you reach “Smith.” If the columns were reversed, you could use Smith,John. For more information, see “GroupWise View” in “System” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). System Preferences Enhancements (v6.5) The following enhancements have been made to the GroupWise System Preferences. * “Default Password for New Users” on page 184 * “Admin Lockout” on page 184 Default Password for New Users Admin Lockout For convenience when creating numerous Group Wise user accounts, you can establish a default password to be assigned to all new Group Wise accounts (ConsoleOne > Tools menu > Group Wise System Operations > System Preferences > Default Password for New Users). For more information, see “System Preferences” in “System” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). You can restrict GroupWise administrators from performing system operations (Tools menu > Group Wise System Operations) unless they are connected to the primary domain. All operations, except Select Domain and Pending Requests, will be unavailable when connected to a secondary domain. 184 GroupWise 6.5 Installation Guide You configure this option through System Preferences (ConsoleOne > Tools menu > GroupWise System Operations > System Preferences > Admin Lockout Settings). For more information, see “System Preferences” in “System” in the Group Wise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Client Options Updates (v6.5) The following updates have been made to Client Options: * “Junk Mail Handling” on page 185 * “Force Client Caching Mode” on page 185 + “New Views Tab in Environment Options” on page 185 * “Restore Default Settings” on page 185 * “Locked Settings Show Where the Setting Was Locked” on page 185 + “New Lockable Settings” on page 186 For additional information about Client Options, see “Setting Defaults for the GroupWise Client Options” in “Users” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). Junk Mail Handling In Client Options Environment Options, the General tab includes settings for the new Junk Mail Handling feature.You can specify whether or not the Junk Mail Handling feature is available for a user. This setting affects both the client and the POA. Junk Mail Handling allows users to block or junk unwanted Internet e-mail. Force Client Caching Mode The Force Caching Mode setting (User object > Tools > Client Options > Environment Options > Client Access tab) now includes a field to specify a number of days before Caching mode is enforced. This allows the user to continue using Online mode until the grace period has passed. New Views Tab in Environment Options In Client Options Environment Options, there is a new Views tab. The settings Read Next After Accept, Decline, or Delete and Open New View After Send have been moved from the General tab to the Views tab. The Disable HTML View setting has also been moved from the General tab to the Views tab. Restore Default Settings A Restore Default Settings button is available on every Client Options tab. Locked Settings Show Where the Setting Was Locked When settings are locked at the domain or post office level, the information is passed down to the levels below it. The lock icons indicate at which level the setting was locked. What's New in GroupWise 6.5 185 New Lockable Settings In previous versions of GroupWise, settings in Client Options that were not available in the Group Wise client were not lockable. In this version, these settings are lockable. Trusted Applications (v6.5) Trusted applications are third-party programs that can log into the POA in order to access GroupWise mailboxes and perform various tasks. The Trusted Applications feature (Tools > Group Wise System Operations > Trusted Applications) allows you to edit and delete trusted applications that are available in your GroupWise system. For instructions on creating and installing trusted applications to your GroupWise system, search for GroupWise Trusted Application API at the Novell Developer Kit (NDK) Web site (http:// developer.novell.com/ndk). For information about editing trusted applications, see “Trusted Applications” in “System Operations” in “System” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). User Description Display (v6.5) You can suppress the display of the contents in the Description field of the User object from appearing in the GroupWise Address Book. (Domain object > Properties > Address Book > Do Not Display User Comments). This keeps comments provided by an administrator in ConsoleOne private from GroupWise users. For more information, see “Determining Fields, Field Order, and Sort Order for the Address Book” in “Address Book” in “System” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). GroupWise / eDirectory Associations (v6.5) The following changes have been made for Group Wise / Novell eDirectory™ associations: + “Graft GroupWise Objects Utility” on page 186 * “Invalid Associations Utility” on page 187 + “Convert User to External Entity” on page 187 Graft GroupWise Objects Utility Previous versions of the Graft GroupWise Objects utility (Tools menu > GroupWise Utilities > GW/eDirectory Association > Graft GroupWise Objects) allowed you to create eDirectory objects for a post office’s users, resources, libraries, and distribution lists. However, you had to graft all four object types at once. You can now select which object types you want to graft. For example, you could graft a post office's users and resources, but not its libraries and distribution lists. For more information, see “Graft GroupWise Objects” in “System” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). 186 GroupWise 6.5 Installation Guide Invalid Associations Utility In a proper association between directories, a GroupWise object in eDirectory points to the corresponding information in the GroupWise directory; that is, the domain database (wpdomain.db). In turn, the information in the GroupWise directory points back to its corresponding object in eDirectory. Occasionally, perhaps because of improper grafting, an invalid association occurs, where the information in the Group Wise directory no longer points to the same eDirectory object that points to it. Such directory problems can now be easily resolved. For information, see “Invalid Associations” in “System” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Convert User to External Entity You can now convert User objects to GroupWise External Entity objects. This removes the user’s User object from eDirectory while retaining the user's GroupWise account information in a GroupWise External Entity object. See “Convert User to External Entity” in “System” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Multiple Account Deletion (v6.5) After you select multiple GroupWise accounts for deletion and indicate whether to delete the eDirectory account, the GroupWise account, or both, the OK to All button applies your deletion options to all selected GroupWise accounts, rather than prompting you on each account to delete. See “Removing GroupWise Accounts” in “Users” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Mailbox Auditing Information Display (v6.5) You can run an audit report in ConsoleOne to determine licensing and activity status for mailboxes in a post office (Post Office object > Tools menu > Group Wise Utilities > Mailbox/Library Maintenance > Audit Report action). Any time after the report runs, you can display the audit information for the post office (Post Office object > Tools > Group Wise Diagnostics > Information). By selecting a Domain object instead of a Post Office object, you can display cumulative information for all audited post offices in the domain. For more information, see “Auditing Mailbox License Usage in the Post Office” in “Post Offices” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Link Configuration Tool Enhancement (v6.5) In the Link Configuration Tool in ConsoleOne, you can drag and drop domains from one link type to another like you could in NetWare® Administrator. This is a quick alternative to the previous ConsoleOne method, where you would right-click a domain, click Edit, then select a different link type. What's New in GroupWise 6.5 187 Message Retention Service for Trusted Applications (v6.5 SP1) GroupWise now supports trusted applications that perform message retention services. When you enable message retention services for a user, the user is unable to purge or archive mailbox items until after the trusted application has copied the items from the user’s mailbox to another storage location. For more information, see “Retaining User Messages” in “Databases” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). DirXML Driver Warnings (v6.5 SP1) The DirXML® Driver for GroupWise provides data integration between GroupWise users and groups in eDirectory. For example, you can have an e-mail account automatically created as soon as an employee is hired. The same driver can also disable an e-mail account when a user is no longer active. If you are using the DirXML Driver for Group Wise, some Group Wise operations that you perform in ConsoleOne require you to take preliminary actions with the driver. For example, if you recover a deleted account, you need to stop the driver before recovering the account and restart it after the operation is complete. The Admin Preferences (ConsoleOne > Tools menu > GroupWise System Operations > System Preferences) now includes a Display DirXML Warnings option that, when enabled, lets you receive a warning message whenever you perform a GroupWise operation in ConsoleOne that is affected by the DirXML driver. The warning message includes instructions about the actions you need to take with the driver before continuing with the GroupWise operation. By default, the Display DirXML Warnings option is enabled. If you are not using the driver, you can disable the option to avoid receiving unnecessary messages. For more information about enabling or disabling the option, see “System Preferences” in “System Operations” in “System” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). GroupWise Agents The Group Wise agents include the enhancements and new features listed below. Changes included in Group Wise 6.5 are indicated by (v6.5). Changes included in GroupWise 6.5 Support Pack 1 are indicated by (v6.5 SP1). * “IMAP Support in the POA (v6.5)” on page 188 * “Secure Connections via SSL between the POA and Clients (v6.5)” on page 189 + “LDAP Server Pooling (v6.5)” on page 189 + “More Specific QuickFinder Intervals (v6.5)” on page 189 + “CAP Support in the POA (v6.5 SP1)” on page 189 IMAP Support in the POA (v6.5) The Post Office Agent (POA) now supports connections to IMAP (Internet Messaging Application Protocol) clients. For setup instructions, see “Supporting IMAP Clients” in “Post Office Agent” in the Group Wise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). 188 GroupWise 6.5 Installation Guide Secure Connections via SSL between the POA and Clients (v6.5) You can use SSL to secure connections between the POA and GroupWise clients or IMAP e-mail clients. You can disable, enable, or require (force) SSL connections for GroupWise clients either inside or outside your firewall and for IMAP e-mail clients that access the post office. For setup instructions, see “Enhancing Post Office Security with SSL Connections to the POA” in “Post Office Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). LDAP Server Pooling (v6.5) Initial LDAP server pooling capabilities, to facilitate robust LDAP authentication for GroupWise users, were introduced in GroupWise 6 Support Pack 2. In GroupWise 6.5, LDAP server information is entered into ConsoleOne once per LDAP server (Tools menu > GroupWise System Operations > LDAP Servers > Add). Additional LDAP information can be configured specifically for each post office (Post Office object > Security page). For setup instructions, see “Providing LDAP Authentication for GroupWise Users” in “Post Office Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). More Specific AuickFinder Intervals (v6.5) You can specify the QuickFinder™ Interval and Start QuickFinder Indexing settings in terms of hours and minutes, instead of just hours. See “Regulating Indexing” in “Post Office Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). CAP Support in the POA (v6.5 SP1) The POA now supports connections to CAP (Calendar Access Protocol) clients. For setup instructions, see “Supporting CAP Clients” in “Post Office Agent” in the Group Wise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). GroupWise Client The Group Wise client for Windows includes the enhancements and new features listed below. Changes included in GroupWise 6.5 are indicated by (v6.5). Changes included in GroupWise 6.5 Support Pack 1 are indicated by (v6.5 SP1). + “Contacts Folder (v6.5)” on page 190 * “Checklist Folder (v6.5)” on page 190 * “Sent Items Folder (v6.5)” on page 191 + “Junk Mail Handling (v6.5)” on page 191 + “Tabbed Item Views (v6.5)” on page 191 * “Categories (v6.5)” on page 191 + “My Subject (v6.5)” on page 192 What's New in GroupWise 6.5 189 + “Filter Enhancements (v6.5)” on page 192 + “Calendar Enhancements (v6.5)” on page 192 + “New Headers (v6.5)” on page 192 + “New Icons (v6.5 / v 6.5 SP1)” on page 192 + “Pending Sent Items (v6.5)” on page 192 + “Attachment Enhancement (v6.5 / v6.5 SP1)” on page 192 + “Mode Drop-Down List (v6.5)” on page 193 * “From Drop-Down List in a Compose View (v6.5)” on page 193 * “Read Views (v6.5)” on page 193 * “Toolbar Enhancements (v6.5)” on page 193 + “Address Selector (v6.5)” on page 193 * “Address Book Enhancements (v6.5)” on page 193 + “S/MIME Secure Message Enhancements (v6.5)” on page 193 + “HTML Enhancement (v6.5 SP1)” on page 194 + “POP3 and IMAP4 Account Passwords (v6.5 SP1)” on page 194 For information about using new features, from the GroupWise client for Windows, click Help > What's New. For additional information about using the GroupWise client, see the GroupWise 6.5 Windows Client User Guide. Contacts Folder (v6.5) The Contacts folder, by default, represents the Frequent Contacts address book in the Address Book. (You can change the folder properties so that 1t represents a different address book in the Address Book.) Any modification you make in the Contacts Folder is also made in the Frequent Contacts address book. From this folder, you can view, create, and modify contacts, resources, organizations, and groups. The Contacts folder is a system folder, which means that it cannot be deleted. Checklist Folder (v6.5) Use the Checklist folder to create a task list. You can move any items (mail messages, phone messages, reminder notes, tasks, or appointments) to this folder and arrange them in the order you want. Each item is marked with a check box so that you can check off items as you complete them. After you have moved an item to the Checklist folder, you can open it, click the Checklist tab, and assign it a due date. You can also mark it Completed and set its position in the list from the Checklist tab. If you want another folder to work the way the Checklist folder does, right-click the folder, click Properties, click the Display tab, then select Checklist from the Setting Name drop-down list. The Checklist folder is a system folder. It replaces the Task List folder. 190 GroupWise 6.5 Installation Guide Sent Items Folder (v6.5) The Sent Items folder displays all the items you have sent. Use this folder to find items you want to resend, reschedule, retract, and so forth. When you send items in Remote or Caching mode, the number of pending items displays in square brackets to the right of the Sent Items folder. This number displays until the items have been sent. The Sent Items folder is a system folder. (The Sent Items folder in previous versions of Group Wise was a Find Results folder.) Junk Mail Handling (v6.5) Use Junk Mail Handling to decide what to do with unwanted Internet e-mail that is sent to your Group Wise e-mail address. Junk Mail Handling allows you to block or junk unwanted Internet e-mail. When you block e-mail, the e-mail address or Internet domain is added to a Block List. When you junk e-mail, the e-mail address or Internet domain is added to a Junk List. You can also add addresses and domains directly to the Block and Junk Lists. E-mail that is junked is moved to a Junk Mail folder. E-mail that is blocked never arrives in your mailbox. A Trust List allows you add addresses and domains that you never want to block or junk. You can specify to junk all Internet e-mail originating from all users except those in your personal address books (including the Frequent Contacts address book). Tabbed Item Views (v6.5) Item views have tabs where you can make selections and specify additional information about that item. In items you are composing, the Send Options tab lets you select the send options that apply to that item. For example, the Mail item view includes options for Priority, Delayed Delivery, Security, Status Tracking, and so forth. In items you have received and sent, the Properties tab shows who else received the item, the size and creation date of attached files, and more. The Personalize tab gives you the options of adding a personal subject and assigning a category to the item. Categories (v6.5) You can assign a category to any item, including contacts. Categories provide you with a way to organize your items. You create and add categories and assign identifying category colors. The colors display in the item list and in the Calendar. You can assign more than one category to an item, and specify which category is the primary one. The color of the primary category is used to identify the item. To assign a category to an item, right-click the item, click Category, then click the category name. Four default categories (Follow-Up, Low Priority, Personal, and Urgent) are available for you to immediately assign to items. You can modify and delete them if you choose, as well as continue to create new categories. You can filter on categories by using the Show menu next to the new Filter icon. You can add a Category column heading and sort your item list by category. What's New in GroupWise 6.5 191 My Subject (v6.5) You can add a personal subject to items in your item list. This subject displays in the item list and in the Calendar. When you open the item, you can see the original subject. Filter Enhancements (v6.5) The new Filter icon is two overlapping circles, one shaded and one white. The Filter icon is now located in the top right of the item list header. The Filter dialog box has been simplified. To access the previous Filter dialog box, click Advanced Filter in the Filter dialog box. Calendar Enhancements (v6.5) The Calendar has a new header with new navigation and date-choosing controls. These controls are consistent in every Calendar view. The colors in the Calendar have been softened to allow category colors of Calendar items to be more noticeable. New Headers (v6.5) Headers have been added above the item list, Folder List, Calendar, and Quick Viewer. They have also been added to items. These headers provide information about the folder or view you are in. In items, they include drop-down lists that display who the item was sent to, recurring dates of auto-date appointments, attachment lists, and more. New Icons (v6.5 / v 6.5 SP1) New icons have been added, and existing icon images have been updated in the toolbar, Item List, Folder List, Calendar, attachment window, item views, and Quick Viewer. Four new icons indicate status for sent items. In SP1, seven new icons indicate status for received items that have been replied to, forwarded, and/or delegated. For an image and description of these icons, click Help, click Help Topics, click the Index tab, look up icons, then display the topic About the Icons Appearing Next to Your Items. Pending Sent Items (v6.5) Pending sent items are displayed in bold in the Item List. Attachment Enhancement (v6.5 / v6.5 SP1) Opening attachments has been enhanced. If the attached item is a forwarded or embedded message, single-clicking the attachment opens the attached message in the message field of the open item. When an attached message is displayed in the message field, the item header includes a link called Parent Message. If you click this link, the message field displays the “parent message,” meaning the item one level up. If the attached item is a file, single-clicking the attachment displays it in the message field of the open item. Double-clicking the attachment either opens it in the application with which it is associated, or displays it in the viewer. New options in Tools > Options > Environment > Default Actions allow you to specify defaults for what happens when attachments are double-clicked. You are also prompted to specify these options the first time you double-click attachments. 192 GroupWise 6.5 Installation Guide In SP1, GroupWise warns you if an attachment is larger than 1000 KB (1 MB). To eliminate the warning message, click Tools > Options > Environment > Default Actions, then deselect Warn If Larger Than. You can also adjust the attachment size at which the warning message is displayed Mode Drop-Down List (v6.5) The Mode drop-down list has been moved from the toolbar to the Folder List header. From this drop-down list, you can select the Online, Caching, and Remote modes. Also from this drop-down list, you can select your Archive mailbox, Backup mailbox, and Proxy. From Drop-Down List in a Compose View (v6.5) In an item you are composing, you can select a Proxy name or the account from which you want to send this item by clicking the From drop-down list. Read Views (v6.5) When you open an item you have sent or received, the item is displayed in a read view (“viewer”). This view is easier to read and distinguish from a compose view. Toolbar Enhancements (v6.5) The toolbar at the top of a folder or item is now context-sensitive; it changes to provide the options you need most in that location. The toolbar icons have been updated with new images. You can now display text next to the icon. Address Selector (v6.5) When you are composing an item and click Address from an item view toolbar, a simple address book called the Address Selector dialog box is displayed. If you want to open the system address book, click Address Book in the Main Window toolbar. Address Book Enhancements (v6.5) The Address Book has been reorganized to display address books in an Address Book List in the left pane of the Address Book view. You can expand and collapse each address book by clicking + and -. Groups display below each expanded address book. Contacts, resources, organizations, and groups display in the right pane of the Address Book view. SIMIME Secure Message Enhancements (v6.5) User and recipient public certificates are accessible from the Address Book. The Certificate Management and S/MIME Warning dialog boxes have been updated. What's New in GroupWise 6.5 193 HTML Enhancement (v6.5 SP1) By default, if you have Default Read View set to Plain Text, Group Wise still displays HTML-only messages automatically because no plain text version is available. In SP1, you can select Force so that a message informs you whenever an HTML-only message cannot be displayed. Then you can click View > HTML to view it. POP3 and IMAP4 Account Passwords (v6.5 SP1) Microsoft Secure Password Authentication is supported for accessing Exchange servers and MSN accounts. GroupWise Internet Agent The Group Wise Internet Agent includes the enhancements and new features listed below. Changes included in GroupWise 6.5 are indicated by (v6.5). Changes included in GroupWise 6.5 Support Pack 1 are indicated by (v6.5 SP1). + “Secure Connections via SSL (v6.5)” on page 194 + “Forced SSL Option for POP and IMAP Clients (v6.5)” on page 194 * “SMTP Host Authentication (v6.5)” on page 195 + “Rerouting Relay Host Messages (v6.5)” on page 195 * “Default Number of SMTP Send and Receive Threads (v6.5)” on page 195 + “Real-Time Blacklists (v6.5)” on page 195 * “Deferred Message Retry (v6.5)” on page 196 * “Enhanced Verbose Logging (v6.5)” on page 196 + “Blocked.txt File (v6.5)” on page 196 * “Internet Agent Restart (v6.5)” on page 197 Secure Connections via SSL (v6.5) You can use SSL to secure connections between the Internet Agent and Post Office Agents (POAs). SSL options are configured on the Internet Agent object’s Network Address page and SSL Settings page in ConsoleOne. For more information, see “Securing Internet Agent Connections Via SSL” in “Internet Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Forced SSL Option for POP and IMAP Clients (v6.5) You can now disable, enable, or require (force) SSL connections for POP and IMAP clients. If SSL is enabled, the POP/IMAP client determines whether or not an SSL connection is used. If SSL is disabled, no SSL connections are used. If SSL is required, only SSL connections are allowed. SSL options are configured on the Internet Agent object’s Network Address and SSL Settings pages in ConsoleOne. For more information, see “Securing Internet Agent Connections Via SSL” in “Internet Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). 194 GroupWise 6.5 Installation Guide SMTP Host Authentication (v6.5) The Internet Agent supports SMTP host authentication for both outbound and inbound message traffic. With outbound authentication, you can ensure that the Internet Agent is able to send messages to other SMTP hosts that require proper authentication credentials before they accept messages. In addition, you can limit the Internet Agent to sending messages only to hosts that require authentication. With inbound authentication, you can require other SMTP hosts to supply proper authentication credentials (Group Wise username and password) before the Internet Agent accepts messages from them. This also applies to POP3/IMAP4 clients. For more information about SMTP host authentication, see “Configuring SMTP Host Authentication” in “Internet Agent” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). Rerouting Relay Host Messages (v6.5) If you use a relay host for outbound messages, you can use a route.cfg file to specify SMTP hosts that you want to directly send outbound messages to. Whenever a message is addressed to a user at a host that is included in the route.cfg file, the Internet Agent sends the message directly to the host rather than to the relay host. The route.cfg file can also be used for other purposes, including: * Sending e-mail to hosts that are unknown to the Public Domain Name Servers. The route.cfg file acts much like a hosts file to enable the Internet Agent to resolve addresses not listed in DNS. * Routing messages destined for certain hosts through a separate SMTP host that checks for viruses or performs some other task on them before routing them to the destination host. For more information about the route.cfg file, see “Enabling SMTP Relaying” in “Internet A gent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Default Number of SMTP Send and Receive Threads (v6.5) The default number of SMTP threads has been increased from 2 send threads and 4 receive threads to 8 send threads and 16 receive threads. This applies to any new Internet Agent installation. It also applies to updated Internet Agent installations if the /copyonly startup switch is not being used. The send and receive thread settings are configured on the Internet A gent object’s SMTP/MIME Settings page in ConsoleOne. For more information about the SMTP send and receive threads, see “Configuring SMTP/MIME Services” in “Internet Agent” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). Real-Time Blacklists (v6.5) Many organizations, such as Mail Abuse Prevention System (MAPS), Open Relay DataBase (ORDB), and SpamCop, provide lists of IP addresses that are known to be open relay hosts or spam hosts. You can use the real-time blacklists provided by these sites to protect your users from offensive spam. What's New in GroupWise 6.5 195 You define blacklist sites through the Internet Agent object’s Access Control Blacklists page in ConsoleOne. For more information about using real-time blacklists, see “Blocking Unwanted E-Mail” in “Internet Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). Deferred Message Retry (v6.5) You can specify the number of hours after which the Internet Agent stops trying to send deferred messages. A deferred message is any message that could not be sent because of a temporary problem (host down, MX record not found, and so forth). For the first hour of the specified time, the Internet Agent tries resending the message every 20 minutes. After the first hour, it tries resending the message every four hours. For example, if you specify 10 hours, the Internet Agent tries resending the message at 20 minutes, 40 minutes, 1 hour, 5 hours, and 9 hours. After the 10 hours has expired, it returns an Undeliverable status to the sender. You configure this option through the Internet Agent object’s SMTP/MIME Settings page in ConsoleOne. For more information about the deferred message retry setting, see “Configuring SMTP/MIME Services” in “Internet Agent” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). Enhanced Verbose Logging (v6.5) In Verbose logging mode, the Internet Agent logs more information, such as: + The filename, path, message ID, and size of the message file being processed ¢ The IP address of any inbound SMTP connections + The Internet Agent-specific MSG number * SMTP connection messages such as “Connected to novell.com” and “Accepted connection from IP address novell.com” Logging modes are configured on the Internet Agent object’s Log Settings page in ConsoleOne. For more information about logging, see “Using Internet Agent Log Files” in “Internet Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Blocked.txt File (v6.5) ConsoleOne creates a blocked.txt file that includes all the hosts that have been added to the Prevent Messages From exceptions list (Default Class of Service > SMTP Incoming > Prevent Messages From). This list is used to define the hosts or domains you do not want to receive messages from. You can manually edit the blocked.txt file to add or remove hosts. To maintain consistency for your system, you can also copy the list to other Internet Agent installations. The blocked.txt file is created in the domain\wpgate\gwia directory. For more information about the blocked.txt file, see “Configuring SMTP/MIME Services” in “Internet Agent” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). 196 GroupWise 6.5 Installation Guide Internet Agent Restart (v6.5) When the Internet Agent restarts, it rereads all of its configuration files. This includes gwia.cfg, blocked.txt, gwauth.cfg, and route.cfg. Changing Internet Agent information in ConsoleOne causes an automatic restart of the Internet Agent to ensure that it knows about the changed information. If you change the configuration files, you can use the new restart option (F6 - Restart) in the Internet Agent console to manually restart the Internet Agent so that it recognizes the changes. For more information about the Internet Agent console, see “Monitoring Internet Agent Operations” in “Internet Agent” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). GroupWise WebAccess GroupWise WebAccess includes the enhancements and new features listed below. Changes included in GroupWise 6.5 are indicated by (v6.5). Changes included in GroupWise 6.5 Support Pack 1 are indicated by (v6.5 SP1). * “Apache Web Server for NetWare Support (v6.5 / v6.5 SP1)” on page 197 * “Tomcat Servlet Engine Support (v6.5 / v6.5 SP1)” on page 197 + “Easier Creation of PQA Files (v6.5)” on page 198 * “Secure Connections via SSL (v6.5)” on page 198 + “Trusted Server (Single Sign-On) Support (v6.5)” on page 198 + “Session Cookie Support (v6.5)” on page 198 * “Proxy Server Data Caching (v6.5)” on page 198 * “Document Viewing and Opening Options (v6.5)” on page 199 * “Size Limitations for Document Viewing (v6.5 SP1)” on page 199 + “Web Browser Data Caching (v6.5 SP1)” on page 200 + “New WebAccess Client Features (v6.5 / v6.5 SP1)” on page 200 Apache Web Server for NetWare Support (v6.5 / v6.5 SP1) GroupWise 6.5 WebAccess supports Apache Web Server on NetWare 6. Support Pack 1 includes support for Apache 2 Web Server on NetWare 6.5. The Installation program recognizes the NetWare server’s version, installs to the appropriate location (apache directory or apache2 directory), and configures the appropriate files. For information, see “WebAccess System Requirements” on page 96. Tomcat Serviet Engine Support (v6.5 / v6.5 SP1) GroupWise 6.5 WebAccess supports the Tomcat 3.3 servlet engine on NetWare 6. Support Pack 1 includes support for the Tomcat 4 servlet engine on NetWare 6.5. WebAccess does not include the Tomcat servlet engine, but can be installed to a NetWare 6.x server that is using it. For information, see “WebAccess System Requirements” on page 96. What's New in GroupWise 6.5 197 Easier Creation of PQA Files (v6.5) The Installation program includes a startup switch, -pga or /pga, that instructs the program to show only the screens required to create a PQA (Palm Query Application) file. The PQA file can be used on a Palm OS device to access GroupWise through the device. For more information about the Internet Agent console, see “Creating a PQA File for the WebAccess Client” in “WebAccess” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). Secure Connections via SSL (v6.5) The WebAccess Agent includes SSL support to provide secure connections to Post Office Agents (POAs) and the WebAccess Agent Web console. SSL options are configured on the WebAccess Agent object’s Network Address page and SSL Settings page in ConsoleOne. For more information, see “Securing WebAccess Agent Connections Via SSL” in “WebAccess” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Trusted Server (Single Sign-On) Support (v6.5) The GroupWise WebAccess Application can be configured to support single sign-on via trusted servers. When enabled, the WebAccess Application authenticates users to GroupWise using authentication header credentials generated by an authentication server (for example, a Novell iChain® Authentication Server). For information about configuring the WebAccess Application to support single sign-on via trusted servers, see “Configuring the WebAccess Application” in “WebAccess” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Session Cookie Support (v6.5) The GroupWise WebAccess Application can be configured to support secure sessions by using session cookies on a per-template-set basis. The session cookie, which is created when the user opens the session, ties the session to the browser and ensures that the WebAccess Application accepts session requests from that browser only. The session cookie is held in memory and exists only as long as the user is logged in. Session cookie support is configured through the GroupWise WebAccess Application object’s Security page in ConsoleOne. For more information, see “Configuring the WebAccess Application” in “WebAccess” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Proxy Server Data Caching (v6.5) The GroupWise WebAccess Application can be configured to enable or disable caching of WebAccess data on proxy servers (or other caching devices) on a per-template-set basis. Proxy servers that cache files can pose an information security risk because any information that the WebAccess Application sends to users is cached. This includes sensitive mailbox information such as message text and passwords. You can attempt to disable proxy server caching of GroupWise information. If you do so, the WebAccess Application includes a “disable proxy caching” request in the header of each file that 198 GroupWise 6.5 Installation Guide it sends. If the proxy server accepts the request, the file is not cached; if it does not accept the request, the file is cached, regardless of this setting. Proxy server data caching is enabled/disabled through the GroupWise WebAccess Application object’s Template page (Define User Interfaces feature) in ConsoleOne. For more information, see “Configuring the WebAccess Application” in “WebAccess” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Document Viewing and Opening Options (v6.5) Previous versions of GroupWise WebAccess allowed users to view an attached document or library document in HTML format. If users wanted to open the document in its native application, they had to first save it to their local drives and then open it in the application. You can now configure WebAccess to enable users to open a document in the document’s native application without first saving it to the local drive. This results in a document having two options: View (as HTML) and Open (in native format). You can enable both options, the View option only, the Open option only, or neither option. You can also enable options for all documents, or you can determine available options based on the type of document. For example, you could force all Microsoft Word documents (.doc files) to use the Open option, while Microsoft Excel documents (.xls files) use the View option. The Open option requires that 1) the Web browser knows the correct application or plug-in to associate with the document, according to its file extension or MIME type, and 2) the application or plug-in is available to the user. Otherwise, the user is prompted to save the file to disk or specify the application to open it. The WebAccess viewing and opening options are configured through the GroupWise WebAccess Application object’s Setting page. For more information, see “Configuring the WebAccess Application” in “WebAccess” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). The WebPublisher viewing and opening options are configured through the Group Wise WebPublisher Application object’s Setting page. For more information, see “Configuring the WebPublisher Application” in “WebAccess” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). Size Limitations for Document Viewing (v6.5 SP1) With Support Pack 1, you can set a maximum size limit for viewing attachments and library documents in HTML format. If a file exceeds the size limit (1024 KB by default), the file is not rendered to HTML. The WebAccess viewing options are configured through the GroupWise WebAccess Application object’s Setting page. For more information, see “Configuring the WebAccess Application” in “WebAccess” in the GroupWise 6.5 Administration Guide (http://www.novell.com/ documentation/gw65). The WebPublisher viewing options are configured through the Group Wise WebPublisher Application object’s Setting page. For more information, see “Configuring the WebPublisher Application” in “WebAccess” in the GroupWise 6.5 Administration Guide (http:// www.novell.com/documentation/gw65). What's New in GroupWise 6.5 199 Web Browser Data Caching (v6.5 SP1) GroupWise 6.5 supports disabling of proxy server data caching (see “Proxy Server Data Caching (v6.5)” on page 198). Support Pack 1 adds support for disabling Web browser data caching. Both proxy server data caching and Web browser data caching are configured through the same option. Therefore, if you disable one, both are disabled. The location where you enable or disable data caching has changed from the WebAccess Application object’s Template page to the Security page. For more information, see “Configuring the WebAccess Application” in “WebAccess” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). New WebAccess Client Features (v6.5 / v6.5 SP1) The following features and enhancements have been made to the WebAccess client: + “Document Viewing and Open Options (v6.5)” on page 200 * “Global Send Options (v6.5)” on page 200 + “Item Send Options (v6.5)” on page 200 * “Checklist Folder (v6.5)” on page 201 + “Sent Items Folder (v6.5)” on page 201 * “Find (v6.5)” on page 201 + “Enhanced Item Properties (v6.5)” on page 201 * “Setting the Default Number of Messages to Display (v6.5)” on page 201 + “Printer-Friendly View (v 6.5 SP1)” on page 201 + “Message Capture after Web Server Outage (v6.5 SP1)” on page 201 For additional information about WebAccess client features, refer to the WebAccess client Help. Document Viewing and Open Options (v6.5) Previous versions of GroupWise WebAccess and WebPublisher allowed users to view an attached document or library document in HTML format. Ifusers wanted to open the document in its native application, they had to first save it to their local drives and then open it in the application. WebAccess can now be enabled by the administrator to allow users to open a document in the document's native application without first saving it to the local drive. This results in a document having two options: View (as HTML) and Open (in native format). Global Send Options (v6.5) WebAccess Client Options now include Send Options. Click the Options icon on the toolbar, then click Send Options. You can specify Classification, Priority, Reply Requested, and Return Notification options. These options apply to all items you send. Item Send Options (v6.5) In an item you are creating, click Send Options. You can specify Classification, Priority, Reply Requested, and Return Notification options. These options apply to the item you are creating. 200 GroupWise 6.5 Installation Guide Checklist Folder (v6.5) The Checklist folder is new in both the Windows and WebAccess versions of the Group Wise client. You can move items to the Checklist folder, arrange items in the order you want, assign due dates to items, and mark them Complete. The Checklist folder is a system folder. It replaces the Task List folder. Sent Items Folder (v6.5) The Sent Items folder displays all the items you have sent that you have not moved to other folders. Use this folder to find items you want to resend, reschedule, retract, and so forth. The Sent Items folder is a system folder. The Sent Items folder in previous versions of GroupWise was a Find Results folder. Find (v6.5) Click the Find icon (a magnifying glass) on the left toolbar of the Main Window to search for items, including document references in your mailbox. You can do a full-text search or search for text in the subject. You can search in the From or To/ CC fields. Select the item types you want to search, the Item Source, and the folders you want to search in, then click Find. The Find Results display, in date descending order, in the right pane of the browser window. Enhanced Item Properties (v6.5) To view basic properties about an item, open an item, then click Properties. To view more detailed properties, open an item, click Properties, then click Other Properties. Setting the Default Number of Messages to Display (v6.5) You can set the default number of messages to display in the Item List by clicking the Options icon on the toolbar, then clicking General. You can select from 5 to 200 messages to be displayed by default. Printer-Friendly View (v 6.5 SP1) If your browser’s Print feature prints a message in a format that loses information, click Print View in the Mail Message window to display a printer-friendly version of the message in a new browser window, then print the message from the new window. Message Capture after Web Server Outage (v6.5 SP1) If a Web server outage occurs while you are composing a message, your message is not lost when you click Send. It is captured and appears at the bottom of the WebAccess Login page so that you can retrieve it when your Web server comes back up and you log into WebAccess again. What's New in GroupWise 6.5 201 GroupWise Monitor GroupWise Monitor includes the enhancements and new features listed below. Changes included in GroupWise 6.5 are indicated by (v6.5). Changes included in GroupWise 6.5 Support Pack 1 are indicated by (v6.5 SP1). * “Apache Web Server for NetWare Support (v6.5 / v6.5 SP1)” on page 202 + “Tomcat Servlet Engine Support (v6.5 / v6.5 SP1)” on page 202 + “Easier Creation of PQA Files (v6.5)” on page 202 + “Agent Groups (v6.5)” on page 202 * “Enhanced Monitor Agent Menus (v6.5)” on page 203 + “Suspend/Resume Polling Capability (v6.5)” on page 203 + “Custom States (v6.5)” on page 203 Apache Web Server for NetWare Support (v6.5 / v6.5 SP1) Group Wise 6.5 Monitor supports Apache Web Server on NetWare 6. Support Pack 1 includes support for Apache 2 Web Server on NetWare 6.5. The Installation program recognizes the NetWare server’s version, installs to the appropriate location (apache directory or apache2 directory), and configures the appropriate files. For information, see “Monitor System Requirements” on page 129. Tomcat Serviet Engine Support (v6.5 / v6.5 SP1) Group Wise 6.5 Monitor supports the Tomcat 3.3 servlet engine on NetWare 6. Support Pack 1 includes support for the Tomcat 4 servlet engine on NetWare 6.5. Monitor does not include the Tomcat servlet engine, but can be installed to a NetWare 6.x server that is using it. For information, see “Monitor System Requirements” on page 129. Easier Creation of PQA Files (v6.5) The Monitor Installation program includes a startup switch, -pga or /pga, that instructs the program to show only the screens required to create a PQA (Palm Query Application) file. The PQA file can be used on a Palm OS device to access the Monitor Web console through the device. For information, see “Creating a PQA File for the Monitor Web Console” in “Monitor” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Agent Groups (v6.5) In GroupWise 6.5 Monitor, you can create groups of related agents to monitor together. All agents in the group share the same threshold, notification, and polling options, so that you can set these options once for the agent group, rather than for each agent individually. For example, you could create an agent group for each region or site in your organization. The groups can be nested hierarchically. For setup instructions, see “Creating and Managing Agent Groups” in “Monitor” in the Group Wise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). 202 = GroupWise 6.5 Installation Guide Enhanced Monitor Agent Menus (v6.5) The menus of the Monitor Agent console have been reorganized to group features more conveniently. Suspend/Resume Polling Capability (v6.5) Polling of monitored agents can be suspended and resumed either indefinitely or for a specified period of time. You can control polling from the Monitor Agent console and from the Monitor Web console. For more information, see “Polling the Agents for Updated Status Information” in “Monitor” in the GroupWise 6.5 Administration Guide (http://www.novell.com/documentation/gw65). Custom States (v6.5) You can now create your own custom states in the Monitor Web console as well as in the Monitor Agent console. What's New in GroupWise 6.5 203 204 GroupWise 6.5 Installation Guide Understanding the Update Process You can update a Novell® GroupWise” 5.x or GroupWise 6.x system to GroupWise 6.5. To update a GroupWise 4.x system to Group Wise 6.5, you need to first update the system to GroupWise 5.x. Before you begin updating your GroupWise system to GroupWise 6.5, you should review the following sections. These sections, which describe the process to follow when updating, help you plan and implement a successful update strategy: * “Understanding eDirectory Schema Extensions” on page 205 + “Understanding GroupWise Software Updates” on page 205 + “Understanding Domain and Post Office Database Updates” on page 206 + “Understanding GroupWise Client Updates” on page 207 * “Understanding Internet Agent Updates” on page 207 * “Understanding WebAccess Updates” on page 208 * “Understanding Monitor Updates” on page 208 * “Understanding GroupWise Gateway Compatibility” on page 209 For a list of enhancements and new features in GroupWise 6.5, see Chapter 11, “What's New in GroupWise 6.5,” on page 181. In some cases, you might need to maintain a mixed-version environment as you roll out Group Wise 6.5. For a table showing which GroupWise 5.x and 6.x components can be used together, see Appendix A, “GroupWise Version Compatibility,” on page 239. Understanding eDirectory Schema Extensions Group Wise 6.5 includes new functionality that requires you to extend the schema of any Novell eDirectory™ trees where you have GroupWise objects. The GroupWise Installation Advisor automatically extends the schema for any trees you select. Understanding GroupWise Software Updates The GroupWise 6.5 software requirements are different than previous GroupWise software requirements. To review the requirements, see “Group Wise System Requirements” on page 19. Software Distribution Directory The GroupWise Installation Advisor helps you copy the Group Wise 6.5 software (administration, agents, client, and so forth) to a GroupWise software distribution directory. This can be an existing software distribution directory or a new software distribution directory. Understanding the Update Process 205 How users run the Group Wise client is the main issue to consider when deciding whether to update an existing software distribution directory or create a new one. The GroupWise 6.5 client cannot run against old (pre-6.5) GroupWise post offices. When you update an existing software distribution directory, users running from the software distribution directory (a workstation installation) are automatically forced to update. If their post office is not yet updated, they are locked out until you update it. Users running the Group Wise client from their local drives (a standard installation) can continue to run the local GroupWise client until you prompt them to update. In general, you should update an existing software distribution directory only if 1) all users can run the GroupWise client from their local drives, or 2) you can update all users’ post offices within a reasonable time of updating the software distribution directory. If this approach does not work for you, you should create a new GroupWise 6.5 software distribution directory. You can then use the new software distribution directory to update your domains and post offices to version 6.5 while users continue to run the older Group Wise client from the existing software distribution directory. After the users’ post offices have been updated, you can update their existing software distribution directory to version 6.5 to get them up and running on the Group Wise client. ConsoleOne GroupWise 6.5 is administered through ConsoleOne®, version 1.3.4 or higher. ConsoleOne 1.3.4 is included on the GroupWise 6.5 Administrator CD. If necessary, you can install it at the same time as the other GroupWise software. After you’ve installed GroupWise 6.5, we strongly recommend that you no longer use NetWare® Administrator to administer your GroupWise system. Doing so can cause problems such as overwriting of the GroupWise 6.5 database dictionary files by older dictionary files. In addition, some GroupWise 6.5 administration functionality, such as post office disk space management, is available only when using ConsoleOne. You can also use ConsoleOne to administer pre-6.5 GroupWise components in your GroupWise system. Administration Agent Beginning with GroupWise 5.5, the Administration Agent’s functionality was moved into the Message Transfer Agent (MTA) and the Post Office Agent (POA). If you are updating a GroupWise 5, 5.1, or 5.2 system, you need to make sure that you do not run the Administration Agent against the domain after you’ve started the GroupWise 6.5 MTA. Doing so can result in the loss of GroupWise 6.5 information. The Agent Installation program includes an option to help you remove the ADA. Understanding Domain and Post Office Database Updates Functionality enhancements in GroupWise 6.5 require the Group Wise domain and post office databases to be updated with new records and fields, similar to the schema extensions that are required for eDirectory. You must update the primary domain first so that correct replication of GroupWise 6.5 information can take place as you update post offices and secondary domains. After you update the primary 206 GroupWise 6.5 Installation Guide domain, you can update the primary domain’s post offices or you can update a secondary domain and its post offices. The following diagram illustrates this update sequence. 8 MA Domain (2) “© Domain A SÁ P A Q @ Post Post Post © * Ra Office Office Office Office Office To update a domain database, you run the Group Wise 6.5 Message Transfer Agent (MTA) against it. The first time the GroupWise 6.5 MTA runs against a domain, it rebuilds the domain database (wpdomain.db) so the database includes the records required for new GroupWise 6.5 information. The MTA uses a new domain dictionary file (gwdom.dc) to rebuild the database. Likewise, to update a post office database, you run the GroupWise 6.5 Post Office Agent (POA) against it. The first time the GroupWise 6.5 POA runs against the post office, it rebuilds the post office database (wphost.db) so the database includes the new records required for GroupWise 6.5 information. The POA uses a new post office dictionary file (gwpo.dc), which it requests from the MTA, to rebuild the database. A user cannot run the GroupWise 6.5 client until his or her post office has been updated. IMPORTANT: Before you update a secondary domain, you must wait until the update to the primary domain has run to completion. Before you update a post office, you must wait until the update to its domain has run to completion. Updating a large domain database can take 20 minutes or more. If you do not wait until the update runs to completion, you might encounter database versioning discrepancies. If such discrepancies occur, see “MTA Fails to Update the Domain Database Version” and “POA Fails to Update the Post Office Database Version” in “Strategies for Agent Problems” in GroupWise 6.5 Troubleshooting 2: Solutions to Common Problems. Understanding GroupWise Client Updates After a post office is updated to version 6.5, users can run the GroupWise 6.5 client on a Windows 98 or Windows NT/2000/XP workstation. If necessary, they can also continue to run their older GroupWise client for Windows, but they will not have GroupWise 6.5 functionality. IMPORTANT: Users who need to proxy users on a post office should not update to the GroupWise 6.5 client until the proxy users’ post office has been updated to version 6.5. If they do update to the GroupWise 6.5 client, they cannot access the proxy users’ mailboxes. For a list of new features in the GroupWise 6.5 client, see Chapter 11, “What's New in GroupWise 6.5,” on page 181. Understanding Internet Agent Updates The GroupWise 6.5 Internet Agent is fully functional only when running against GroupWise 6.x domains and post offices. If you run it against a GroupWise 5.x domain or post office, users on Group Wise 5.x post offices can send and receive Internet messages (SMTP support), but cannot use POP3 and IMAP4 clients to access their mailboxes. Understanding the Update Process 207 The GroupWise 5.x/6 Internet Agent can run against a GroupWise 6.5 domain and post office, which means that you can continue to use it until all domains and post offices are updated to version 6.5. For a list of new features in GroupWise 6.5 Internet Agent, see Chapter 11, “What’s New in GroupWise 6.5,” on page 181. Understanding WebAccess Updates As you plan how to update GroupWise WebAccess, you need to consider both the WebAccess Agent and the WebAccess components on the Web server. * “WebAccess Agent” on page 208 * “WebAccess Components on the Web Server” on page 208 WebAccess Agent The GroupWise 6.5 WebAccess Agent cannot access older (pre-6.5) domains and post offices. In addition, WebAccess Agents older than version 5.5 EP SP3 cannot access GroupWise 6.5 domains and post offices. Therefore, to continue to provide WebAccess service to users while you are updating your system, you need to: * Update the WebAccess Agent at the same time you update its domain and post offices. This keeps the WebAccess Agent version synchronized with the domain and post office version. * Ifyou have multiple domains or post offices that will be updated over a long period of time, install the GroupWise 6.5 WebAccess Agent in a GroupWise 6.5 domain to service users on Group Wise 6.5 post offices. Keep your current WebAccess Agent, installed in a Group Wise domain that will support it, to service users on pre-6.5 post offices. WebAccess Components on the Web Server The GroupWise 6.5 WebAccess Agent can communicate with the GroupWise 5.5 or newer WebAccess applications/servlets (on the Web server). If you have GroupWise 5.5 or newer, you can update your WebAccess Agent independent of the WebAccess components on the Web server. The GroupWise 6.5 WebAccess Agent cannot communicate with pre-5.5 Web server components. In this case, you need to update the WebAccess components on your Web server at the same time you update the WebAccess Agent. For a list of changes and new features in GroupWise 6.5 WebAccess, see Chapter 11, “What's New in GroupWise 6.5,” on page 181. Understanding Monitor Updates Group Wise Monitor is not dependent on any other Group Wise agents, so it can be updated at any time. For a list of changes and new features in GroupWise 6.5 Monitor, see Chapter 11, “What's New in GroupWise 6.5,” on page 181. For Monitor update instructions, see “Preparing Your Group Wise System” on page 211. 208 GroupWise 6.5 Installation Guide Understanding GroupWise Gateway Compatibility There are no known issues with using GroupWise gateways with GroupWise 6.5. Understanding the Update Process 209 210 GroupWise 6.5 Installation Guide Preparing Your GroupWise System To prepare your Novell® GroupWise® system to be updated to version 6.5, complete the following tasks: * Validate your domain and post office databases to make sure that there are no physical inconsistencies with the database. If problems exist, you should recover or rebuild the database. For information about validating, recovering, or rebuilding a database, see the GroupWise documentation for your GroupWise version at the Novell Documentation Web site (http://www.novell.com/documentation). * Back up the domain or post office immediately before updating it. GroupWise provides a backup utility, gwbackup.exe, that you can use to back up and restore your databases. For information about using the backup utility, see the GroupWise documentation for your Group Wise version at the Novell Documentation Web site (http://www.novell.com/ documentation). Preparing Your GroupWise System 211 212 GroupWise 6.5 Installation Guide Updating Your GroupWise 6.x System to Version 6.5 The following sections provides step-by-step instructions for updating your Novell® GroupWise® 6.x system to GroupWise 6.5. Before beginning, make sure you have reviewed Chapter 12, “Understanding the Update Process,” on page 205 and Chapter 13, “Preparing Your Group Wise System,” on page 211. + “Installing the GroupWise 6.5 Software” on page 213 * “Updating the Primary Domain” on page 217 * “Updating Post Offices” on page 223 + “Updating Users’ GroupWise Clients” on page 224 + “Updating Secondary Domains” on page 227 * “Updating the GroupWise Internet Agent” on page 227 * “Updating GroupWise WebAccess” on page 227 + “Updating GroupWise Monitor” on page 227 Installing the GroupWise 6.5 Software To start the GroupWise Installation Advisor: 1 From a Windows workstation, log in as an Admin equivalent to the Novell eDirectory™ tree where you are installing GroupWise. 2 Insert the GroupWise 6.5 Administrator CD into the workstation's CD drive. 3 Click Start, click Run, then type d: setup. exe (where d is your CD drive). Updating Your GroupWise 6.x System to Version 6.5 213 GroupWise. Novell O View the Readme O View the Installation Guide @ Create or update a GroupWise system 9 Install Products O Visit the Novell GroupWise Web Site 4 Click Create or Update a GroupWise System, then click Yes to accept the license agreement and display the Welcome to GroupWise Install dialog box. GroupWise Installation -loj xj Welcome to GroupWise Install Install does the following: Novell. [ii Helps you plan your system ® Ensures that eDirectory is extended to work with Groupwise e Updates ConsoleDne Installs Group Wise Administrator files for A J ConsoleOne ` Sets up the GroupWise software distribution directory e Runs ConsoleOne with the Setup Advisor to help you configure your GroupWise system if necessary GroupWise Installation El = [o] x| Administration Options ‘You may create or update a GroupWise system, or N ove Il perform other administrative tasks. IV Create a new system or update an existing system. IV Evtendithe NDS Schema I Install Administration files y M Copy files to a software distribution directory. Installation Guide | < Back Exit 214 GroupWise 6.5 Installation Guide 6 Make sure that Create a New System or Update an Existing System is selected, then click Next to display the Select Tree dialog box. ox Select Tree eDirectory will be extended to work with GroupWise N ove Il on the tree(s) you select. If the tree you want is not listed, log in as Admin equivalent to the desired tree and click Refresh. You will need to extend the schema for each tree associated with a GroupWise domain in order to take advantage of GroupWise functionality. Select tree(s): NOVELL INC Installation Guide | 7 In the Select Tree dialog box, select the trees whose schema you want to extend (you should extend the schema of all trees where Group Wise objects reside), click Next, then follow the prompts until you reach the Ready to Install dialog box. GroupWise Installation Ready to Install N ove Il Click Install to copy Groupwise files to your system. È / Installation Guide | <Back | Install Exit 8 Click Install, then follow the prompts until you reach the Determine Next Step dialog box. Updating Your GroupWise 6.x System to Version 6.5 215 GroupWise Installation 104 x} Novell. 1 #3 Determine Next Step GroupWise software has been successfully installed. Install will now guide you through the remaining steps to complete the GroupWise system configuration. Are you @ Updating an existing GroupWise system? C Creating a new GroupWise system? Installation Guide | 9 Click Updating an Existing GroupWise System, then click Next to display the Update < Back Ext | GroupWise System dialog box. GroupWise Installation E = (04 xj Novell. if Pe Update GroupWise System To update an existing Groupwise system, you must perform the following steps in order. 1. Click Update to update all agents in the primary domain. Always run the MTA to update the domain database first and then run the POAs to update the post office databases. 2. After verifying that the primary domain has been updated successfully, update all agents in each secondary domain by running install.exe from the agents directory on the CD or software distribution directory. 3. Users can update the GroupWise client after you've updated their post office. Enter the location of the primary domain: A gi Installation Guide | 10 Continue with the next section, Updating the Primary Domain. Updating the Primary Domain To update the primary domain, you need to install and start the GroupWise 6.5 MTA. The MTA uses the new domain dictionary file (gwdom.dc) to update the domain database to version 6.5. IMPORTANT: The MTA cannot be running while you update the MTA files. If you are updating a GroupWise system that still uses the ADA (Administration Agent), the ADA cannot be running. In addition, after you've updated to the GroupWise 6.5 MTA, do not run the ADA again. The ADA became obsolete with GroupWise 5.5. Running the ADA in combination with a GroupWise 6.5 MTA results in the loss of GroupWise 6.5 information. To install and start the GroupWise 6.5 MTA: 1 To install the MTA to a NetWare® server, make sure the workstation has access to both the primary domain directory and the NetWare server where you want to install the MTA, enter the path to the primary domain directory, then click Update to launch the Agent Installation program. or 216 GroupWise 6.5 Installation Guide To install the MTA to a Windows server, click Finish, go to the Windows server, ensure that you have access to the primary domain directory, then start the Agent Installation program (install.exe). The Agent Installation program is located in the \agents directory in the GroupWise 6.5 software distribution directory or on the GroupWise 6.5 Administrator CD. 2 Click Yes to accept the license agreement and display the Overview dialog box. GroupWise Agent Installation = m| xj Overview Welcome to the Groupwise Agent Installation Program. N ove I | È The following agent software will be installed and configured: Message Transfer Agent (MTA): Routes messages between domains, post offices, and gateways Post Office Agent (POA): Delivers messages to users’ mailboxes 3 Click Next to display the Install/Uninstall dialog box. GroupWise Agent Installation i 4 210] x| Install / Uninstall Novell. Bisel GroupWise agent executables and startup files for each designated POA and MTA will be installed to the specified directory. © Uninstall All GroupWise agent executable files and startup files will be deleted from the specified directory. If you still plan to run one or more GroupWise agents from this directory, do not choose Uninstall. Installation Guide | < Back Exit 4 Make sure Install is selected, then click Next to display the Select Platform dialog box. Updating Your GroupWise 6.x System to Version 6.5 217 GroupWise Agent Installation E 104 x} Select Platform Select the agent software platform: Novell. (© NetWare C Windows NT/2000 È) ci Installation Guide | < Back Exit | 5 In the Select Platform dialog box, select NetWare or Windows, then click Next to display the Installation Path dialog box. GroupWise Agent Installation E =104x1 Installation Path Enter the path where you want the Group Wise agent N ove I | . software installed. Installation path: MES Gj Options - IV Install Groupwise agent software IV Install and configure SNMP for GroupWise agents Install as NT services FK ofa Installation Guide | < Back Exit | The default NetWare installation directory is sys:\system and the default Windows directory is c:\grpwise. You can, however, install the agent files to any directory. On NetWare, if you don’t install to the sys:\system directory, you must define the agent directory in the server’s search path. For example, you could add SEARCH ADD sys:\system\agent_directory to the autoexec.ncf file, where agent directory is the actual name of the installation directory. If you are installing to Windows, the dialog box displays the following options: Install GroupWise Agent Software: This option must be selected to install the agent files. You would only want to deselect it if you previously installed the Group Wise 6.5 MTA without configuring it for SNMP or as a Windows service and now want to perform those configuration tasks. Install and Configure SNMP for GroupWise Agents: Select this option to enable the MTA to be monitored through an SNMP management program. This option is available only if the SNMP service is enabled on the Windows server. Install as Windows Services: Select this option to install the MTA as a Windows service. 6 Select the directory where you want to install the agent files, then click Next to display the Language dialog box. 218 GroupWise 6.5 Installation Guide GroupWise Agent Installation =(5) x| Language Select the agent languages to install: Novell. E @ 3 Installation Guide < Back If multiple languages are displayed, you can install one or more of'the languages. By default, the MTA starts in the language selected for the domain. Ifthat language has not been installed, the MTA starts in the language used by the operating system. If that language has not been installed, the MTA starts in English. Select the languages you want to install, then click Next to display the Domains / Post Offices dialog box. GroupWise Agent Installation = 15) xj Domains / Post Offices To configure the agent software, Install must know the N ove I l. locations of the domains and post offices these agents will service. Click Add to specify a domain or post office location. Click Next when all domains and post offices have been added. [Name [Path ype [HTTP Port | Add... Remove Installation Guide Ext | To simplify the process of loading the MTA, the Agent Installation program uses the domain information you enter in the Domains / Post Offices dialog box to create an MTA startup file. The startup file includes a required switch (/home-path) that points to the domain directory. The Agent Installation program also creates a grpwise.ncf file on NetWare or a Startup menu shortcut on Windows. The .ncf file or shortcut includes the command to load the MTA using the MTA startup file. To specify the location of your domain, click Add, enter the domain name, enter the path to the domain directory, then click OK to add the domain to the list. In addition to the MTA, the POA is automatically installed to the installation directory. If you plan to run the POA on the same server as the MTA, specify the location of the post office (or post offices) the POA will service. The Agent Installation program creates a POA startup file with a /home switch that points to the post office directory. It then includes the command to load the POA in the grpwise.ncf file on NetWare or in a Startup menu shortcut on Windows. Updating Your GroupWise 6.x System to Version6.5 219 9 Click Next. If you are installing the NetWare MTA or the Windows MTA (as a regular Windows application, not as a Windows service), the Summary dialog box is displayed. Skip to Step 11. or If you are installing the MTA as a Windows service, the Windows Service Information dialog box is displayed. GroupWise Agent Installation 104 xj Windows Service Information The following settings will be applied to each MTA and N ove I l. POA service installed. Ti ju act with desktop 74° Use this Windows user account In order to run against a post office or domain on a NetWare server, this user and password must already exist in eDirectory and have rights to the domain and post office directories. Specify name of the Windows user account to use/create: A —_—_—__ Specify password: Verify password: -Startup Type (© Automatic © Manual © Disabled Installation Guide | < Back Ext | The MTA requires a user account that provides access to the domain directory. + Ifthe domain directory is on the Windows server, you can use the local system user account to provide the access; the Use Local System Account option is available only if the domain directory is on the local server. + Ifthe domain directory is on another Windows server, you need to specify a Windows user account that provides access to that server. + Ifthe domain directory is on a NetWare server, you need to specify a username and password that is valid as both a Windows user account and an eDirectory user account. If you are also planning to run the POA on this server, the user account you specify must also provide access to the post office directory. 10 Provide the appropriate user account information, then click Next to display the Summary dialog box. GroupWise Agent Installation 4 = |e x Summary Platform: Netware N ove I I . Path: jAsystem If the above information is incorrect, click Back until you teach the appropriate page and then enter the correct values. È y E OMe Installation Guide | 220 GroupWise 6.5 Installation Guide 11 12 Click Install to install the agent files. After the files are installed, the Agent Installation program creates the MTA startup file and the grpwise.ncf file (NetWare) or Startup menu shortcut (Windows). MTA Startup File: If an MTA startup file already exists, the Agent Installation program renames the existing file with a .mtl extension. For example, an existing provo.mta file would be renamed to provo.mtl before the new provo.mta file is created. If you’ve made modifications to the existing MTA startup file, you might want to use it instead of the new MTA file. The same is true for the POA (if you defined a post office in the Domains / Post Office dialog box). grpwise.ncf File (NetWare only): If a grpwise.ncf file already exists, the Agent Installation program gives you the option of 1) overwriting the existing grpwise.ncf file, 2) appending the new MTA load commands to the existing grpwise.ncf file, or 3) creating a new file named grpwisl.ncf. If you have modified the existing grpwise.ncf file and want to save the modifications, you should append to the existing file or create a new grpwis1.ncf file. If you append to the file, make sure you review it later to ensure that it includes only the commands you want. Shortcut: If a shortcut already exists on the Start menu (Start > Programs > GroupWise Agents), the Agent Installation program replaces the shortcut with the new shortcut. After the startup file and grpwise.ncf file or Windows shortcut have been created, the Installation Complete dialog box is displayed. GroupWise Agent Installation [1512] Installation Complete The GroupWise agent software has been successfully N ove l l. installed and configured. IV Launch GroupWise agents now TT Launch in Protected Mode Installation Guide Back Exit | Select from the following options: Update AUTOEXEC File: This option applies only to the NetWare agents. Select this option to reference the grpwise.ncf file from the NetWare server’s autoexec.ncf file so that the MTA loads automatically whenever the server starts. If you specified a post office in the Domains / Post Offices dialog box (Step 8), the POA is also loaded. Delete Obsolete Administration Agent (ADA) Files and References to ADA: The Administration Agent (ADA) is no longer necessary and should not be used with the GroupWise 6.5 MTA. Select this option to delete the ADA program and startup files. Launch Group Wise Agents Now: Select this option to start the MTA. After you start the MTA, it updates the domain database to version 6.5. You can verify that the database version has been updated by viewing the Domain object’s Identification page in ConsoleOne®. If you specified a post office in the Domains / Post Offices dialog box (Step 8), the POA is also started. After the domain database is updated, the POA updates the post office database. You Updating Your GroupWise 6.x System to Version6.5 221 can view the Post Office object’s Identification page in ConsoleOne to verify that the database version has been updated. If for some reason it has not been updated, restart the POA. IMPORTANT: If you specified a post office in the Domains / Post Offices page (Step 8) so that the POA will be running on the same server as the MTA, do not select this option. Start the MTA manually and wait until it has updated the domain database. For a large domain database, you might need to wait 20 minutes or more. When the Domain object's Identification page in ConsoleOne shows that the database version has been updated to 6.5, then start the POA to update the post office database. You can check the Post Office object’s Identification page in ConsoleOne to verify that the database version has been updated to 6.5. If for some reason it has not been updated, see “POA Fails to Update the Post Office Database Version” in “Strategies for Agent Problems” in GroupWise 6.5 Troubleshooting 2: Solutions to Common Problems. If you’ ve installed the NetWare MTA and want it to run in protected mode on the NetWare server, select the Launch in Protected Mode option. 13 Click Finish to perform the selected options. 14 To update post offices in the domain, continue with the next section, Updating Post Offices. or To update other domains, skip to “Updating Secondary Domains” on page 227. Updating Post Offices To update a post office, you need to install the GroupWise 6.5 POA and run it against the post office. The POA uses a new 6.5 version of the post office dictionary file (gwpo.dc) to update the post office database to version 6.5. After you’ ve installed the POA, you might also need to copy the new GroupWise client views from the software distribution directory to the post office directory. + “Installing and Starting the POA” on page 223 * “Copying the GroupWise Views to the Post Office Directory” on page 224 Installing and Starting the POA The POA cannot be running while you update it. Users who connect to the post office via client/ server (TCP/IP) cannot access the post office while the POA is shut down. However, users who connect to the post office via direct access (mapped drive or UNC path) can continue to access the post office. IMPORTANT: The MTA for the domain that the post office belongs to should be updated and running before you install and start the POA. To install and start the POA: 1 To install the POA to a NetWare server, start the GroupWise Agent Installation program (install.exe) from a Windows 98/NT/2000/XP workstation that has access to the server. or To install the POA to a Windows server, start the GroupWise Agent Installation program (install.exe) from that server. The install.exe program is located in the \agents directory in the GroupWise 6.5 software distribution directory or on the GroupWise 6.5 Administrator CD. 222 GroupWise 6.5 Installation Guide To streamline the update process on NetWare and Windows, you can run the Agent Installation program (agents\install.exe) with the /copyonly startup switch, which copies the updated agent software files but does not perform any other agent configuration. On Linux, the Installation program offers separate file copy and configuration options to streamline the update process. 2 Click Yes to accept the license agreement and display the Overview dialog box. GroupWise Agent Installation =104x1 Overview ‘Welcome to the GroupWise Agent Installation Program. N ove I l. The following agent software will be installed and configured: Message Transfer Agent (MTA): Routes messages between domains, post offices, and gateways Post Office Agent (POA): Delivers messages to users’ mailboxes Bach Exit 3 Follow the prompts to complete the installation and start the POA. The process for installing the POA is identical to installing the MTA. If you need information about any of the Installation Agent dialog boxes, refer to “Updating the Primary Domain” on page 217. 4 Continue with the next section, Copying the GroupWise Views to the Post Office Directory. Copying the GroupWise Views to the Post Office Directory Group Wise 6.5 includes new views for the GroupWise client. When the POA starts, it updates the post office database and also attempts to update the client views in the post office directory. To do so, it requires access to the software distribution directory. If it doesn’t have access, you must manually copy the views. You can check whether or not the POA was able to update the views by verifying the existence of the us02*.vew files in the x:\post_office\ofviews\win directory, where x. \po is the path to the post office directory. If the us02*.vew files do not exist, copy all files from z:\software\client\ofviews\win to x:\po\ofviews\win where z: \software is the path to the software distribution directory and x: \po is the path to the post office directory. Updating Your GroupWise 6.x System to Version 6.5 223 Updating Users’ GroupWise Clients After a post office is updated to version 6.5, users who have accounts on that post office can start using the GroupWise 6.5 client. The tasks you need to complete to update users depend on whether or not the users’ software distribution directory has been updated to GroupWise 6.5. + “Users” Software Distribution Directory Already Updated” on page 225 * “Users’ Software Distribution Directory Requires Updating” on page 225 Users’ Software Distribution Directory Already Updated If you updated the users’ software distribution directory to version 6.5 during installation, the following occurs the next time users start the Group Wise client: ¢ Users who run the GroupWise client from the software distribution directory (a workstation installation) are updated to version 6.5. + Users who run the GroupWise client from their local drives (a standard installation) are not updated automatically. You need to use the Software Directory Management feature in ConsoleOne to force Standard Install users to update. Follow the instructions under “Users’ Software Distribution Directory Requires Updating” on page 225, choosing the Force Auto- Update Check by GroupWise Component option when instructed. Users’ Software Distribution Directory Requires Updating If the users’ software distribution directory has not been updated, you need to use the new software distribution directory (or the GroupWise 6.5 Administrators CD) to update the users’ old software distribution directory. Users are then updated. IMPORTANT: Before you update a software distribution directory, make sure all post offices that use the software distribution directory have been updated. The GroupWise 6.5 client cannot access a pre-6.5 post office. Users who update to the GroupWise 6.5 client before their post office has been updated are locked out of the post office. Users cannot be running the GroupWise client from the software distribution directory while you are updating the software in it. Open files are not updated. To update a Group Wise software distribution directory to GroupWise 6.5: 1 Make sure you have Read, Write, Create, Erase, Modify, and File Scan rights (or equivalent rights) in an existing GroupWise 6.5 software distribution directory and in the software distribution directory you are updating to version 6.5. or If you still have access to the GroupWise 6.5 Administrator CD, you can use it instead of an existing GroupWise 6.5 software distribution directory. 2 In ConsoleOne, click Tools > GroupWise System Operations > Software Directory Management. 224 GroupWise 6.5 Installation Guide Novell? UGWISYSigrpwiselsoftwarebd Edit... Description: NGWISYSigrpwisetsoftwareb | 3 Select the software distribution directory you want to update, then click Update to display the Update Software Distribution Directory dialog box. KW update Software Distribution Directory xj 0); | oftware Distribution Directory Cancel INovell2 hd Help | © Path | Force auto-update check by GroupWise components 4 Click Update by Copying From. 5 Click Software Distribution Directory, then select the GroupWise 6.5 software distribution directory. or If the GroupWise 6.5 software distribution directory is not listed, click Path, then enter the path to the directory. You can also use this option to update the software directly from the Group Wise 6.5 Administrator CD. The Force Auto-Update Check by GroupWise Components option is automatically selected. This causes the GroupWise client to check for a new version; if a new version is found, the client then prompts users to update the next time they start the client. IMPORTANT: If the software distribution directory is already updated to version 6.5 and you are now trying to force Standard Install users to update to the GroupWise 6.5 client, you should select only the Force Auto-Update Check by GroupWise Components option. 6 Click OK to copy the files. Updating Your GroupWise 6.x System to Version6.5 225 IMPORTANT: When you turn on auto-update (the Force Auto-Update Check by GroupWise Components option), a flag is set in each post office database. This flag instructs the GroupWise client to check for updated software. GroupWise clients using direct access mode (mapped or UNC path) read this new setting in the post office database and automatically check for updated software. However, GroupWise clients running in client/server mode do not access the post office database directly; instead, the Post Office Agent accesses the post office database for them. For the Post Office Agent to read the new auto-update setting, you need to restart the Post Office Agent. Only after the POA restarts will GroupWise clients running in client/server mode check for updated software. Updating Secondary Domains After you have updated the primary domain, you can update any secondary domains in your system. To do so, follow the same process you used to update the primary domain, its post offices, and users. To streamline the update process on NetWare and Windows, you can run the Agent Installation program (agents\install.exe) with the /copyonly startup switch, which copies the updated agent software files but does not perform any other agent configuration. On Linux, the Installation program offers separate file copy and configuration options to streamline the update process. IMPORTANT: The MTA for the domain that the secondary domain links to should be updated and running before you update the secondary domain. Updating the GroupWise Internet Agent After you’ ve updated your domains and post offices, you can update the Internet Agent. For information about update issues you should consider, see “Understanding Internet Agent Updates” on page 207. To streamline the update process on NetWare and Windows, you can run the Internet Agent Installation program (internet\gwia\install.exe) with the /copyonly startup switch, which copies the updated Internet Agent software files but does not perform any other Internet Agent configuration. On Linux, the Installation program offers separate file copy and configuration options to streamline the update process. For complete information about installing GroupWise 6.5 Internet Agent, see Chapter 4, “Installing the GroupWise Internet Agent,” on page 73. Updating GroupWise WebAccess After you’ve updated your domains and post offices, you can update GroupWise WebAccess. For information about update issues you should consider, see “Understanding WebAccess Updates” on page 208. For information about installing GroupWise 6.5 WebAccess, see Chapter 5, “Installing GroupWise WebAccess,” on page 93. Updating GroupWise Monitor You can update GroupWise Monitor at any time. For information about installing GroupWise 7 Monitor, see Chapter 6, “Installing GroupWise Monitor,” on page 127. 226 = GroupWise 6.5 Installation Guide Updating Your GroupWise 5.x System to Version 6.5 The process and procedures for updating a Novell® GroupWise® 5.x system to version 6.5 are the same as when updating a GroupWise 6.x system to version 6.5. Refer to the following sections for instructions: * Chapter 12, “Understanding the Update Process,” on page 205 * Chapter 13, “Preparing Your GroupWise System,” on page 211 * Chapter 14, “Updating Your GroupWise 6.x System to Version 6.5,” on page 213 What's New Since Your GroupWise 5.x Version The GroupWise features and functionality that are new to you depend on the version of GroupWise 5 that you are updating from (5, 5.1, 5.2, 5.5, 5.5 Enhancement Pack). For example, if you are updating from GroupWise 5.2, the new features and functionality added in versions 5.5, 5.5 Enhancement Pack, 6, and 6.5 are all new. If you are updating from Group Wise 5.5 Enhancement Pack, only the version 6 and 6.5 features are new. Chapter 11, “What's New in GroupWise 6.5,” on page 181 includes only the changes made since version 6. For changes made in previous versions, refer to the following: * Version 5.2 to 5.5: What's New in GroupWise 5.5 (http://www.novell.com/documentation/ lg/gw55/gw55updt/data/a4dx213.html) * Version 5.5 to 5.5 Enhancement Pack: GroupWise 5.5 Enhancement Pack Getting Started (http://www.novell.com/documentation/lg/gw55ep/pdfdoc/gw55ep.pdf) * Version 5.5 EP to 6: What's New in GroupWise 6 (http://www.novell.com/documentation/ gw6/gw6_install/data/aady513.html) GroupWise 5.2 Administration Agent WARNING: Beginning with GroupWise 5.5, the Administration Agent's functionality was moved into the Message Transfer Agent (MTA) and the Post Office Agent (POA). If you are updating a GroupWise 5, 5.1, or 5.2 system, you need to make sure that you do not run the Administration Agent against the domain after you've started the GroupWise 6.5 MTA. Doing so can result in the loss of GroupWise 6.5 information. Updating Your GroupWise 5.x System to Version6.5 227 228 GroupWise 6.5 Installation Guide Updating an Evaluation GroupWise System to a Fully Licensed System An evaluation GroupWise® system, available from the Novell® Product Downloads page (http:// download.novell.com/pages/PublicSearch.jsp), can consist of one domain, two post offices, and as many as five users on each post office. When you purchase the full Group Wise product, install the GroupWise Administrator snap-ins to ConsoleOne®. When you begin to administer your evaluation system with the licensed snap-ins, your evaluation system is converted into a fully licensed system, in which you can create any number of domains and post offices, along with the number of users for which you are licensed. Updating an Evaluation GroupWise System to a Fully Licensed System 229 230 GroupWise 6.5 Installation Guide Moving Your Existing GroupWise System to Linux This section is designed for those who are moving existing GroupWise® 6.5 users, post offices, and domains to Linux. If you have GroupWise 6.0 or 5.x, review Chapter 14, “Updating Your GroupWise 6.x System to Version 6.5,” on page 213 and Chapter 15, “Updating Your Group Wise 5.x System to Version 6.5,” on page 229 to acquaint yourself with the issues involved in updating from one version of GroupWise to another. Because Group Wise 6.5 for Linux is functionally equivalent to GroupWise 6.5 Support Pack 1, there are no update issues involved in moving to Linux if you are already running GroupWise 6.5. * “Moving Windows Users to Linux or Macintosh” on page 233 * “Moving a Post Office to Linux” on page 233 * “Moving a Domain to Linux” on page 236 Moving Windows Users to Linux or Macintosh If users want to move from Windows workstations to Linux or Macintosh, they first need to install the Cross-Platform client, as described in “Setting Up the GroupWise Cross-Platform Client” on page 173. They can then immediately use the Cross-Platform client to connect to their GroupWise mailboxes, regardless of whether the mailboxes reside on Linux, NetWare®, or Windows servers. If users have Caching mailboxes or archives on their Windows workstations, they can simply copy them to an appropriate location on their Linux or Macintosh workstations, and then, in the Cross- Platform client, update the file location information accordingly (Tools > Options > Archive Directory and Caching Mailbox Directory). Remote mode is not currently supported in the Cross- Platform client, so Remote users should not copy their Remote mailboxes to Linux or Macintosh. Moving a Post Office to Linux 1 Ifyou are moving a post office that has a library with a remote document storage area, follow the steps in Handling Remote Document Storage Areas, then return to this point. 2 On the Linux server, become root in a terminal window. 3 Mount the NetWare or Windows server where the post office is located to the Linux file system, using commands similar to the following examples: NetWare Server: mount -t ncpfs //NetWare server name /mountpoint directory -o user=username -o ipserver=server IP. address -o server=server_hostname or mount -t cifs //NetWare_server_name/volume -o user=username /mountpoint_directory Moving Your Existing GroupWise System to Linux 231 The NetWare_server_name should be specified as its full DNS name (for example, Inxsvr3.provo.novell.com). The username should be specified as a fully qualified name (for example, admin.users.corporate). Windows Server: mount -t smbfs //Windows_server_name/sharename /mountpoint_directory -o username=username 4 Create a new directory for your GroupWise system into which the post office directory will be copied. For example: mkdir /gwsystem If you want to use an existing directory, make sure that it is empty. 5 Use DBCopy to copy the post office directory from the NetWare or Windows server to the new directory on the Linux server. ./dbcopy -M /post_office_directory /destination_directory DBCopy is typically used for backing up your GroupWise system, but when you use the -M switch to move a post office, it changes directory names to lowercase as required on Linux and copies the message queue directories as well as the GroupWise databases in the post office. For instructions on installing and running DBCopy, see “GroupWise Database Copy Utility” in “Databases” in the GroupWise 6.5 Administration Guide. At this point, it is acceptable for users to still be running GroupWise. For a large post office, it might take one to two hours to copy the post office. You will run DBCopy again in a later step, after you have configured the post office for its new location, in order to pick up new and modified files. At that point, all users need to be out of GroupWise for a short time. If you are copying a large post office, you might want to skip to Step 11 to install the POA software while the post office is being copied, to further minimize down time for users. You should then return to Step 6 when the copying is completed. 6 In ConsoleOne® on Windows, update the location information for the post office: Ga Display the Identification property page of the Post Office object. 6b In the UNC Path field, change the path to the location on the Linux server where you copied the post office. For example: \\linuxsvr3\gwsystem\research For a Linux server, ConsoleOne interprets the UNC path as a Linux path. Do not put a Linux path in the UNC Path field. 6c Display the Identification property page of the POA object for the post office. 6d In the Platform field, make sure that Linux is selected. Ge Display the Network Address property page of the POA object for the post office. 6f In the Network Address field, specify the IP address of the Linux server. 6g Click OK to save the new path and IP address information for the post office. 7 Notify users that they must exit GroupWise unless they are running in Caching mode. Users in Caching mode do not need access to the post office in order to continue using GroupWise. 8 On the NetWare or Windows server, stop the POA for the post office. GroupWise users can no longer access the post office. 232 GroupWise 6.5 Installation Guide 9 On the Linux server, run DBCopy again. ./dbcopy -M -I mm-dd-yyyy /post_office_directory /destination_directory When you run DBCopy the second time and include the -I switch with today’s date, it copies only files that have been modified today, like an incremental backup. The second DBCopy process should be substantially shorter than the first one. 10 Run the standalone GroupWise Check utility (GWCheck) with the storelowercase support option to convert the filenames and directory names stored inside Group Wise databases in the post office to lowercase: 10a See “Starting GWCheck on a Linux Workstation” in “Databases” in the GroupWise 6.5 Administration Guide for instructions on installing and starting GWCheck. 10b In the Database Type box, select Post Office. 10c Browse to and select the post office database in its new location, then specify the post office name. 10d In the Object Type box, select Post Office. 10e In the Support Options field on the Misc tab, specify storelowercase. 10f Click Run to run GWCheck. 11 Run the GroupWise Installation program to install the Linux POA for the post office, as described in “Installing the GroupWise Agents on Linux” on page 157. 12 Start the Linux POA using the --show startup switch, as described in “Starting the Linux Agents with a User Interface” on page 159. 13 If your system includes an Internet Agent that is used for POP and IMAP e-mail clients, check the link between the Internet Agent and the post office: 13a In ConsoleOne on Windows, right-click the Internet Agent object, then click Properties. 13b Click Post Office Links. 13c Make sure that the link shows the correct IP address where the Linux POA for the moved post office is now running. 14 If your system includes the WebAccess Agent, check the link between the WebAccess Agent and the moved post office: 14a In ConsoleOne on Windows, right-click the WebAccess Agent object, then click Properties. 14b Click Post Office Links. 14c Make sure that the link shows the correct IP address where the Linux POA for the moved post office is now running. 15 Provide GroupWise users with the new IP address where the Linux POA is now running so that they can start Group Wise again and access their mailboxes on the Linux server. If you are running a GroupWise name server, as described in “Simplifying Client/Server Access with a GroupWise Name Server” in “Post Office Agent” in the GroupWise 6.5 Administration Guide, users are automatically redirected to the new IP address when they start Group Wise. 16 When the Linux POA is running smoothly for the new post office location, delete the old post office directory structure on the NetWare or Windows server. Moving Your Existing GroupWise System to Linux 233 17 Set up a backup procedure for the post office in it new location, as described in “GroupWise Database Copy Utility” in “Databases” in the GroupWise 6.5 Administration Guide. Handling Remote Document Storage Areas If the post office that you are moving to Linux has a library with a remote document storage area that is still located on NetWare or Windows, you have two alternatives for accessing the document storage area: * Mount the storage area: You can leave the document storage area on the NetWare or Windows servers. To provide access, you mount the storage area to the Linux server where the post office is located, using the command provided in Step 3 in “Moving a Post Office to Linux” on page 233. * Move the storage area: If you want to eliminate the NetWare or Windows server, you can move the document storage area to a convenient location on the Linux server. This also eliminates the need for mounting file systems. In either case, before the Linux POA can successfully access the document storage area, you must make sure that all directory names and file names are in lowercase. In addition, you must update the document storage area location in ConsoleOne: Browse to and right-click the Library object, then click Properties. Click GroupWise > Storage Areas. Select the storage area that you have moved, then click Edit. hb WO N = In the Linux Path field, provide the full path to the storage area from the point of view of the POA running on the Linux server. Click OK twice to save the storage area information. 6 Return to Step 2 in “Moving a Post Office to Linux” on page 233. Moving a Domain to Linux 1 On the Linux server, become root in a terminal window. 2 Mount the NetWare or Windows server where the domain is located as a Linux file system, using commands similar to the following examples: NetWare Server: mount -t ncpfs //NetWare_server_name /mountpoint directory -o user=username -o ipserver=server. IP. address -o server=server. hostname or mount -t cifs //NetWare_server_name/volume -o user=username /mountpoint_directory The NetWare_server_name should be specified as its full DNS name (for example, Inxsvr3.provo.novell.com). The username should be specified as a fully qualified name (for example, cn=admin.users.corporate). Windows Server: mount -t smbfs //Windows_server/sharename /mountpoint directory -o username=username 3 Ifyou have not already done so, create a new directory for your GroupWise system into which the domain directory will be copied. For example: 234 GroupWise 6.5 Installation Guide 10 11 12 13 mkdir /gwsystem If you want to use an existing directory, make sure that it is empty. On the NetWare or Windows server, stop the MTA for the domain. If the domain has gateways, stop the gateways. Use DBCopy to copy the domain directory from the NetWare or Windows server to the new directory on the Linux server. ./dbcopy -M /domain directory /destination_directory DBCopy is typically used for backing up your GroupWise system, but when you use the -M switch to move a domain, it changes directory names to lowercase as required on Linux and copies the message queue directories as well as well as the GroupWise databases in the domain. For instructions on installing and running DBCopy, see “GroupWise Database Copy Utility” in “Databases” in the GroupWise 6.5 Administration Guide. In ConsoleOne on Windows, update the location information for the domain: Ta Display the Identification property page of the Domain object. 7b In the UNC Path field, change the path to the location on the Linux server where you moved the domain. For example: \\linuxsvr3\gwsystem\provo3 For a Linux server, ConsoleOne interprets the UNC path as a Linux path. Do not put a Linux path in the UNC Path field. 7c Display the Identification property page of the MTA object for the domain. Td In the Platform field, make sure that Linux is selected. Te Display the Network Address property page of the MTA object for the domain. 7f In the Network Address field, specify the IP address of the Linux server. 7g Click OK to save the new directory and IP address information for the domain. If you are using the /work startup switch to place the MTA working directory (mslocal) outside the domain directory structure: 8a Copy the mslocal directory to the Linux server so that no messages en route between users are lost. 8b In the mslocal directory structure, rename files and directories that contain uppercase letters to all lowercase. Run the GroupWise Installation program to install the MTA for the new domain location, as described in “Installing the GroupWise Agents on Linux” on page 157. If the domain has gateways, follow the instructions in “Handling Gateways” on page 238 before you proceed with Step 11. Start the Linux MTA using the --show startup switch, as described in “Starting the Linux Agents with a User Interface” on page 159. At the MTA agent console, check to see if all links between the new Linux MTA and other domains and post offices are open. If you have closed links, see “MTA Status Box Shows a Closed Location” in “Strategies for Agent Problems” in GroupWise 6.5 Troubleshooting 2: Solutions to Common Problems. If the domain has gateways, start each gateway. Moving Your Existing GroupWise System to Linux 235 14 When the Linux MTA is running smoothly for the domain new location, delete the old domain directory structure (and if applicable, the mslocal directory structure) on the NetWare or Windows server. Handling Gateways If the domain that you moved to Linux has gateways associated with it, you must reselect each gateway directory in ConsoleOne: 1 Browse to and select the Domain object for the domain you just moved to Linux. 2 Right-click a Gateway object, then click Properties. 3 Click GroupWise > Identification. 4 In the Subdirectory field, reselect the gateway directory. If you do not have any gateway subdirectories to choose from, you have not successfully completed Step 7 in “Moving a Domain to Linux” on page 236. al Click OK to save the gateway directory information. 6 Repeat Step 2 through Step 5 for each gateway that belongs to the domain. 7 Return to Step 11 on page 237 to start the Linux MTA for the domain. 236 GroupWise 6.5 Installation Guide Appendixes Appendix A, “GroupWise Version Compatibility,” on page 239 Appendix B, “Third-Party Materials,” on page 247 Appendix C, “Documentation Updates,” on page 257 Appendixes 237 238 GroupWise 6.5 Installation Guide GroupWise Version Compatibility Use the tables in this section to determine compatibility among the following Novell® Group Wise” versions: * “GroupWise 6.5 for Linux” on page 239 * “GroupWise 6.5” on page 243 * “GroupWise 6” on page 246 IMPORTANT: GroupWise 5.x versions have entered the end-of-life phase and are no longer supported. For update instructions, see Chapter 15, “Updating Your GroupWise 5.x System to Version 6.5,” on page 227. The GroupWise 5.x administration tool, NetWare® Administrator with GroupWise snap-ins, cannot be used to administer GroupWise 6.x systems. For each Group Wise version, the tables indicate compatibility for: * Administrative components: Domain and post office database platforms and versions, eDirectory™ platforms, and GroupWise snap-in to ConsoleOne® platforms and versions * Agents: Domain and post office database platforms and versions, agent platforms and versions * Clients: Post office directory platforms and access, POA platforms and versions, client modes In the compatibility tables, cells that combinations that are not applicable are marked N/A. For example, the POA never needs to communicates with the Internet Agent, so that table cell is N/A. For information about what operating system versions are supported for GroupWise 6.5 on NetWare, Linux, and Windows, refer to “GroupWise System Requirements” on page 19. For information about what operating system versions are supported for GroupWise 6, refer to the GroupWise 6 Installation Guide (http://www.novell.com/documentation/gw6). GroupWise 6.5 for Linux In the compatibility tables, GroupWise 6.5 for Linux is represented by GW 6.5L where space is limited. * “Compatibility with GroupWise 6.5” on page 240 * “Compatibility with GroupWise 6” on page 241 GroupWise Version Compatibility 239 Compatibility with GroupWise 6.5 GroupWise 6.5 Administrative Components with GroupWise 6.5 for Linux GroupWise 6.5 GW 6.5 Objects in Windows ConsoleOne Domain and Post Office eDirectory on NetWare + GW 6.5 Snap-Ins Databases on NetWare or Windows or Windows GroupWise 6.5 for Linux Components GW 6.5L Domain and Post Office Databases on Linux N/A N/A Supported GW 6.5L Objects in eDirectory on Linux N/A N/A Supported Linux ConsoleOne + GW 6.5L snap-ins Supported Supported N/A Table Summary: On both Linux and Windows, ConsoleOne with the Group Wise snap-ins can be used to access GroupWise databases for domains and post offices and Group Wise objects in eDirectory located on NetWare, Linux, or Windows. When using Linux ConsoleOne to administer domains and post offices on NetWare or Windows, you must mount the NetWare or Windows server to your Linux machine. When using Windows ConsoleOne to administer domains and post offices on Linux, you can use a Samba share to access the Linux server from your Windows machine. GroupWise 6.5 Agents with GroupWise 6.5 for Linux GroupWise 6.5 GW 6.5 GW 6.5 GW 6.5 GW 6.5 GW 6.5 Domain or MTA on POA on GWIA on WebAccess Monitor on Post Office NetWare or NetWare or NetWare or on NetWare Windows GroupWise 6.5 Databases on Windows Windows Windows or Windows for Linux NetWare or Agents Windows GW 6.5L Domain | N/A Supported Supported Supported Supported Supported and Post Office Databases on Linux GW 6.5L MTA Supported Supported Supported Supported N/A Supported on Linux GW 6.5L POA Supported Supported N/A N/A Supported Supported on Linux GW 6.5L GWIA Supported Supported N/A Supported N/A Supported on Linux GW 6.5L Supported N/A Supported N/A N/A Supported WebAccess on Linux GW 6.5L Monitor on Linux Supported Supported Supported Supported Supported N/A 240 GroupWise 6.5 Installation Guide Table Summary: Domains and post offices can be located on NetWare, Linux, or Windows. We do not recommended that you run the Linux agents for domains and post offices located on NetWare and Windows. However, existing GroupWise 6.5 domains and post offices can be moved onto Linux servers so that the Linux agents can update them to Group Wise 6.5 for Linux. All the Linux agents can communicate as usual with the NetWare and Windows agents. GroupWise 6.5 Mailbox Access with the GroupWise 6.5 Cross-Platform Client GroupWise 6.5 GroupWise 6.5 GW 6.5 POA GW 6.5 POA GW 6.5 POA for Linux Post Office Client/Server Access Client/Server Access Dial-Up Access Client Direct Access Online Mode Caching Mode Remote Mode Cross-Platform client on Linux Not supported Supported Supported Not supported Table Summary: The GroupWise 6.5 for Linux Cross-Platform client can communicate in client/ server mode with the GroupWise 6.5 POA on NetWare or Windows. The Cross-Platform client cannot access the post office directly, nor can it communicate with the GroupWise 6.5 POA across a dial-up connection over a modem. Remote mode is not supported in the Cross-Platform client. Compatibility with GroupWise 6 GroupWise 6 Administrative Components with GroupWise 6.5 for Linux GroupWise 6 GW 6 Objects in Windows ConsoleOne Domain and Post Office eDirectory on NetWare + GW 6 snap-ins Databases on NetWare or Windows or Windows GroupWise 6.5 for Linux Components GW 6.5L Domain and Post Office Databases on Linux N/A N/A Not Supported GW 6.5L Objects in eDirectory on Linux N/A N/A Not Supported Linux ConsoleOne + GW 6.5L snap-ins Supported Supported N/A Table Summary: On Linux, ConsoleOne with the GroupWise snap-ins can be used to access GroupWise databases for domains and post offices and Group Wise objects in eDirectory on NetWare, Linux, and Windows. On Windows, ConsoleOne with the GroupWise 6 snap-ins cannot be used to access GroupWise 6.5 for Linux domains and post offices on Linux. The general rule is that later Group Wise snap-ins can administer earlier Group Wise system components, but earlier Group Wise snap-ins cannot administer later GroupWise system components. GroupWise Version Compatibility 241 GroupWise 6 Agents with GroupWise 6.5 for Linux GroupWise 6 GW 6 MTA GW 6 POA GW 6 GWIA GW6 GW 6 Monitor Domain and on NetWare on NetWare onNetWareor WebAccess on Windows Post Office or Windows or Windows Windows on NetWare GroupWise 6.5 | Databases on or Windows for Linux NetWare or Agents Windows GW 6.5L N/A Not Not Not Not Not Domain and Supported Supported Supported Supported Supported Post Office Databases on Linux GW 6.5L MTA | Supported Supported Supported Supported N/A Supported on Linux GW 6.5L POA | Supported Supported N/A N/A Supported Supported on Linux GW 6.5L Supported Supported N/A Not N/A Supported GWIA Supported on Linux GW 6.5L Supported N/A Not N/A N/A Supported WebAccess Supported on Linux GW 6.5L Supported Supported Supported Supported Supported N/A Monitor on Linux Table Summary: Domains and post offices can be located on NetWare, Linux, or Windows. We do not recommended that you run the Linux agents for domains and post offices located on NetWare and Windows. However, existing GroupWise 6 domains and post offices can be moved onto Linux servers so that the Linux agents can update them to GroupWise 6.5 for Linux. Although most GW 6.5L/GW 6 agent combinations are supported, note that two combinations are not supported. GroupWise 6 Mailbox Access with the GroupWise 6.5 Cross-Platform Client GroupWise 6.5 | GroupWise 6 GW 6 POA GW 6 POA GW 6 POA for Linux Post Office Client/Server Access Client/Server Access Dial-Up Access Client Direct Access Online Mode Caching Mode Remote Mode Cross-Platform client on Linux Not supported Not supported Not supported Not supported Table Summary: The GroupWise 6.5 for Linux Cross-Platform client cannot access a GroupWise 6 post office in any way. The general rule is that earlier POAs cannot communicate with later GroupWise clients, but later GroupWise POAs can always communicate with earlier GroupWise clients. 242 =~ GroupWise 6.5 Installation Guide GroupWise 6.5 Select the GroupWise version that you want to determine GroupWise 6.5 compatibility with: + “Compatibility with GroupWise 6” on page 243 * “Compatibility with GroupWise 5.x” on page 244 Compatibility with GroupWise 6 GroupWise 6 Administrative Components with GroupWise 6.5 GroupWise 6 GW 6 Objects in ConsoleOne + Domain and Post Office eDirectory GW 6 Snap-Ins Databases GroupWise 6.5 Components GW 6.5 Domain and Post Office Databases N/A N/A Not Supported GW 6.5 Objects in eDirectory N/A N/A Not Supported ConsoleOne + GW 6.5 snap-ins Supported Supported N/A Table Summary: ConsoleOne with the GroupWise 6.5 snap-ins can be used to access Group Wise 6 databases for domains and post office and GroupWise 6 eDirectory objects. However, ConsoleOne with the GroupWise 6 snap-ins cannot be used to access GroupWise 6.5 databases and Group Wise 6 eDirectory objects. The general rule is that later GroupWise snap-ins can administer earlier Group Wise system components, but earlier GroupWise snap-ins cannot administer later GroupWise system components. GroupWise 6 Agents with GroupWise 6.5 GroupWise 6 GW6MTA GW6POA GW6GWIA GW6 GW 6 Domain and WebAccess Monitor GroupWise 6.5 Post Office Agents Databases GW 6.5 Domain N/A Not Not Not Not Not and Post Office Supported Supported Supported Supported Supported Databases GW 6.5 MTA Supported Supported Supported Supported N/A Supported GW 6.5 POA Supported Supported N/A N/A Supported Supported GW 6.5 GWIA Supported Supported N/A Not N/A Supported Supported GW 6.5 Supported N/A Not N/A N/A Supported WebAccess Supported GW 6.5 Monitor Supported Supported Supported Supported Supported N/A GroupWise Version Compatibility 243 Table Summary: GroupWise 6 agents cannot access domain and post office databases that have been updated to GroupWise 6.5. When a GroupWise 6.5 MTA or POA accesses a GroupWise 6 database, it automatically updates the database to GroupWise 6.5. Although most GroupWise 6.5/ GroupWise 6 agent combinations are supported, note that two combinations are not supported. GroupWise 6 Mailbox Access with the GroupWise 6.5 Windows Client GroupWise 6 GW 6 POA GW 6 POA GW 6 POA GroupWise 6.5 | Post Office Client/Server Access Client/Server Access Dial-Up Access Windows Client | Direct Access Online Mode Caching Mode Remote Mode Windows Not Supported Not Supported Not Supported Not Supported client Table Summary: The GroupWise 6.5 Windows client cannot communicate with the GroupWise 6 POA, nor can it access a GroupWise 6 post office directly. The general rule is that earlier POAs cannot communicate with later GroupWise clients, but later POAs can always communicate with earlier Group Wise clients. GroupWise 6.5 Mailbox Access with the GroupWise 6 Windows Client GroupWise 6.5 GW 6.5 POA GW 6.5 POA GW 6.5 POA GroupWise 6 Post Office Client/Server Access Client/Server Access Dial-Up Access Windows Client | Direct Access Online Mode Caching Mode Remote Mode Windows Not Supported Supported Supported Supported client Table Summary: The Group Wise 6 Windows client can communicate with the Group Wise 6.5 POA, but it cannot access a GroupWise 6.5 post office directly. The general rule is that later POAs can always communicate with earlier GroupWise clients, but earlier POAs cannot communicate with later GroupWise clients. Compatibility with GroupWise 5.x GroupWise 5.x Administrative Components with GroupWise 6 GroupWise 5.x GW 5.x Objects in NetWare Administrator GroupWise 6 Domain and Post Office eDirectory + GW 5.x Snap-Ins Components Databases GW 6 Domain and Post N/A N/A Not Supported Office Databases GW 6 Objects in N/A N/A Not Supported eDirectory ConsoleOne + Supported Supported N/A GW 6 snap-ins Table Summary: NetWare Administrator cannot be used to administer GroupWise 6 systems. ConsoleOne with the GroupWise 6 snap-ins can be used to administer GroupWise 5.x systems. The general rule is that later Group Wise snap-ins can administer earlier GroupWise system components, but earlier GroupWise snap-ins cannot administer later Group Wise system components. 244 GroupWise 6.5 Installation Guide GroupWise 5.x Agents with GroupWise 6 GroupWise 5.x GW5.x MTA GW 5.x POA GW 5.x GWIA GW 5.x GW 5.x Domain and WebAccess Monitor GroupWise 6 Post Office Agents Databases GW 6 Domainand | N/A Not Not Not Not Not Post Office Supported Supported Supported Supported Supported Databases GW 6 MTA Supported Supported Supported Supported N/A Supported GW 6 POA Supported Supported N/A N/A Supported Supported GW 6 GWIA Supported Supported N/A Not N/A Supported Supported GW 6 WebAccess | Supported N/A Not N/A N/A Supported Supported GW 6 Monitor Supported Supported Supported Supported Supported N/A Table Summary: Group Wise 5.x agents cannot access domain and post office databases that have been updated to GroupWise 6. When the GroupWise 6 MTA or POA accesses a GroupWise 5.x database, it automatically updates the database to GroupWise 6. Although most GroupWise 6/ GroupWise 5.x agent combinations are supported, note that two combinations are not supported. GroupWise 5.x Mailbox Access with the GroupWise 6 Windows Client GroupWise 5.x GW 5.x POA GW 5.x POA GW 5.x POA GroupWise 6 Post Office Client/Server Access Client/Server Access Dial-Up Access Client Direct Access Online Mode Caching Mode Remote Mode Windows Not supported Not Supported Not Supported Not Supported client Table Summary: The Group Wise 6 Windows client cannot communicate with the Group Wise 5.x POA, nor can it access a GroupWise 5.x post office directly. The general rule is that later GroupWise clients cannot communicate with earlier POAs. GroupWise 6 Mailbox Access with the GroupWise 5.x Windows Client GroupWise 6 GW 6 POA GW 6 POA GW 6 POA GroupWise 5.x | Post Office Client/Server Access Client/Server Access Dial-Up Access Client Direct Access Online Mode Caching Mode Remote Mode Windows Not supported Supported Supported Supported client Table Summary: The Group Wise 5.x Windows client can communicate with the GroupWise 6 POA, but it cannot access a Group Wise 6 post office directly. The general rule is that later POAs can always communicate with earlier Group Wise clients, but earlier POAs cannot communicate with later GroupWise clients. GroupWise Version Compatibility 245 GroupWise 6 See the following sections: + GroupWise 6.5 for Linux: “Compatibility with GroupWise 6” on page 241 * GroupWise 6.5: “Compatibility with GroupWise 6” on page 243 246 = GroupWise 6.5 Installation Guide Third-Party Materials The following third-party software is included in Novell® Group Wise” 6.5 for Linux: + + + “Apache Server 2 / Tomcat 4.1” on page 247 “OpenSSL” on page 248 “OpenLDAP” on page 250 “NET-SNMP Open Source Package” on page 250 “ODMA 2.0” on page 253 “Python 2.2” on page 254 “getopt.h” on page 254 “JRE” on page 255 Apache Server 2 / Tomcat 4.1 The Apache Software License, Version 1.1 Copyright (c) 2000 The Apache Software Foundation. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. . Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. . The end-user documentation included with the redistribution, if any, must include the following acknowledgment: "This product includes software developed by the Apache Software Foundation (http:// www.apache.org/)." Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear. . The names "Apache" and "Apache Software Foundation" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact apache@apache.org. . Products derived from this software may not be called "Apache", nor may "Apache" appear in their name, without prior written permission of the Apache Software Foundation. THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF Third-Party Materials 247 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation. For more information on the Apache Software Foundation, please see <http://www.apache.org/>. Portions of this software are based upon public domain software originally written at the National Center for Supercomputing Applications, University of Illinois, Urbana-Champaign. OpenSSL OpenSSL License Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3 All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)" 4 The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. 5 Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 6 Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)" THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 248 = GroupWise 6.5 Installation Guide OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscape’s SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1 Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3 All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" The word “cryptographic” can be left out if the routines from the library being used are not cryptographic related :-). 4 If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING Third-Party Materials 249 NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publicly available version or derivative of this code cannot be changed; i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence. | OpenLDAP The OpenLDAP Public License Version 2.8, 17 August 2003 Redistribution and use of this software and associated documentation ("Software"), with or without modification, are permitted provided that the following conditions are met: 1 Redistributions in source form must retain copyright statements and notices, 2 Redistributions in binary form must reproduce applicable copyright statements and notices, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution, and 3 Redistributions must contain a verbatim copy of this document. The OpenLDAP Foundation may revise this license from time to time. Each revision is distinguished by a version number. You may use this Software under terms of this license revision or under the terms of any subsequent revision of the license. THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND ITS CONTRIBUTORS “AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OPENLDAP FOUNDATION, ITS CONTRIBUTORS, OR THE AUTHOR(S) OR OWNER(S) OF THE SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The names of the authors and copyright holders must not be used in advertising or otherwise to promote the sale, use or other dealing in this Software without specific, written prior permission. Title to copyright in this Software shall at all times remain with copyright holders. OpenLDAP is a registered trademark of the OpenLDAP Foundation. Copyright 1999-2003 The OpenLDAP Foundation, Redwood City, California, USA. All Rights Reserved. Permission to copy and distribute verbatim copies of this document is granted. NET-SNMP Open Source Package Various copyrights apply to this package, listed in 4 separate parts below. Please make sure that you read all the parts. Up until 2001, the project was based at UC Davis, and the first part covers all code written during this time. From 2001 onwards, the project has been based at SourceForge, and Networks Associates Technology, Inc hold the copyright on behalf of the wider Net-SNMP 250 GroupWise 6.5 Installation Guide community, covering all derivative work done since then. An additional copyright section has been added as Part 3 below also under a BSD license for the work contributed by Cambridge Broadband Ltd. to the project since 2001. An additional copyright section has been added as Part 4 below also under a BSD license for the work contributed by Sun Microsystems, Inc. to the project since 2003. ---- Part 1: CMU/UCD copyright notice: (BSD like) ----- Copyright 1989, 1991, 1992 by Carnegie Mellon University Derivative Work - 1996, 1998-2000 Copyright 1996, 1998-2000 The Regents of the University of California All Rights Reserved Permission to use, copy, modify and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of CMU and The Regents of the University of California not be used in advertising or publicity pertaining to distribution of the software without specific written permission. CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ---- Part 2: Networks Associates Technology, Inc copyright notice (BSD) ----- Copyright (c) 2001-2003, Networks Associates Technology, Inc All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ¢ Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR Third-Party Materials 251 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) ----- Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ¢ Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. ¢ Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) ----- Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ¢ Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 252 GroupWise 6.5 Installation Guide ODMA 2.0 ¢ Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. OPEN DOCUMENT MANAGEMENT API LICENSE 1.0 ODMA 2.0 SPECIFICATIONS AND SOFTWARE Copyright © 1994-1998 AIIM International LICENSE: Redistribution and use in source and binary forms, with or without modifications, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. ¢ Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. + Neither the name of AIIM International nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. DISCLAIMER: THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF Third-Party Materials 253 Python 2.2 getopt.h THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ADDITIONAL INFORMATION: * ODMA reference materials, software, and status: <http://ODMA.info> + Information about this ODMA License and its application: <http://DMare.info/license/> * Open Source Definition 1.9 and the BSD License (the model for this ODMA license): <http://opensource.org> + HTML (ISO 8859-1) version of this license: <http://Dmware.info/license/P040801F.htm> Copyright (c) 1991 - 1995, Stichting Mathematisch Centrum Amsterdam, The Netherlands. All rights reserved. Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Stichting Mathematisch Centrum or CWI not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. Copyright (c) 2000 The NetBSD Foundation, Inc. All rights reserved. This code is derived from software contributed to The NetBSD Foundation by Dieter Baron and Thomas Klausner. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 254 = GroupWise 6.5 Installation Guide JRE 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the NetBSD Foundation, Inc. and its contributors. 4. Neither the name of The NetBSD Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. JRE Note This product includes code licensed from RSA Security, Inc. Some portions licensed from IBM are available at http://oss.software.ibm.com/icu4j/. Third-Party Materials 255 256 GroupWise 6.5 Installation Guide Documentation Updates This section lists updates to the /nstallation Guide that have been made since the initial release of Novell® GroupWise® 6.5. The information helps you to keep current on documentation updates and, in some cases, software updates (such as a Support Pack release). The information is grouped according to the date when the Installation Guide was republished. Within each dated section, the updates are listed by the section title. The GroupWise 6.5 Installation Guide has been updated on the following dates: + + + “February 6, 2006 (Group Wise 6.5 SP6)” on page 257 “October 31, 2005” on page 258 “September 19, 2005 (Group Wise 6.5 SP5)” on page 258 “February 28, 2005 (Group Wise 6.5 SP4)” on page 259 “November 30, 2004 (Group Wise 6.5 SP3)” on page 259 “September 30, 2004” on page 260 “June 25, 2004 (Group Wise 6.5 SP2 and Group Wise 6.5 for Linux SP2)” on page 260 “May 3, 2004 (Group Wise 6.5 for Linux)” on page 260 “October 31, 2003” on page 262 “July 16, 2003 (SP1)” on page 263 February 6, 2006 (GroupWise 6.5 SP6) Location Change Install “GroupWise System Removed Konqueror from the lists of supported Web browsers. Reguirements” on page 19 Update “Moving a Post Office to Added a second sample mount command. Linux” on page 231 “Moving a Domain to Linux” Added a second sample mount command. on page 234 Documentation Updates 257 October 31, 2005 Location Update “Updating Post Offices” on page 222 “Updating Secondary Domains” on page 226 “Updating the GroupWise Change Included information about the /copyonly startup switch for the Agent Installation program. Included information about the /copyonly startup switch for the Agent Installation program. Included information about the /copyonly startup switch for the Internet Internet Agent” on page 226 Agent Installation program. Location Installation Chapter 2, “GroupWise System Requirements,” on page 19 “Selecting the Internet Agent Installation Directory” on page 78 “Starting the Internet Agent on NetWare” on page 86 “Starting the Internet Agent on Windows’ on page 89 “Starting GroupWise WebAccess” on page 110 “Monitor Agent Console on a Windows Server” on page 142 “Installing the NetWare Agent Software” on page 155 “Installing the Windows Agent Software” on page 164 Update “Understanding Monitor Updates” on page 208 258 = GroupWise 6.5 Installation Guide September 19, 2005 (GroupWise 6.5 SP5) Change Increased the visibility of GroupWise system requirements. Clarified that it’s best to install the Internet Agent on the same server where the domain directory is located. Added instructions for stopping the Internet Agent on NetWare®. Added instructions for stopping the Internet Agent on Windows. Added instructions for stopping the WebAccess Agent on NetWare and Windows. Added instructions for stopping the Monitor Agent on Windows. Added instructions for stopping the agents on NetWare. Added instructions for stopping the agents on Windows. Added planning considerations for updating GroupWise Monitor. Location “Updating GroupWise Monitor” on page 226 Chapter 15, “Updating Your GroupWise 5.x System to Version 6.5,” on page 227 Appendix “Compatibility with GroupWise 6” on page 243 “Compatibility with GroupWise 5.x” on page 244 Location Installation “GroupWise System Requirements” on page 19 “Selecting a Linux Mount Directory” on page 60 Appendix “GroupWise Version Compatibility” on page 239 Location Installation “GroupWise System Requirements” on page 19 “Planning Your Basic GroupWise System” on page 24 “GroupWise Internet Agent Overview” on page 73 “Using SNMP Traps to Monitor the Windows Internet Agent” on page 81 Change Added installation instructions for updating GroupWise Monitor. Added a warning about the GroupWise 5.x Administration Agent. Added a table showing that the GroupWise 6 Windows client is supported when accessing a post office where a GroupWise 6.5 POA is running. Added a table showing that the GroupWise 5.x Windows client is supported when accessing a post office where a GroupWise 6 POA is running. February 28, 2005 (GroupWise 6.5 SP4) Change Clarified that it is the 32-bit versions of the listed operating systems that are supported. Added examples of mount directories for Linux, NetWare, and Windows servers. Added a link from the GroupWise Version Compatibility chart to the list of supported operating systems for GroupWise 6.5 and GroupWise 6. November 30, 2004 (GroupWise 6.5 SP3) Change Added SUSE Linux Enterprise Server 9 and Windows 2003 Server to the list of supported operating systems. Added a link to the GroupWise 6.5 Best Practices Guide. Added that the Linux version of the Internet Agent is SNMP compliant. Clarified that the NetWare and Linux Internet Agents do not require a separate installation option in order to have SNMP functionality. Documentation Updates 259 Location “WebAccess System Requirements” on page 96 “Windows Options” on page 101 “Using SNMP Traps to Monitor the Windows Agents” on page 153 Update “Moving a Post Office to Linux” on page 231 and “Moving a Domain to Linux” on page 234 September 30, 2004 Location Update “Moving a Post Office to Linux” on page 231 Location Install “Installing GroupWise Messenger” on page 175 Update Chapter 17, “Moving Your Existing GroupWise System to Linux,” on page 231 Location Install 260 GroupWise 6.5 Installation Guide Change Added a link to information about using WebAccess with unsupported Web servers. Clarified that the NetWare and Linux WebAccess Agents do not require a separate installation option in order to have SNMP functionality. Clarified that the NetWare and Linux WebAccess POA and MTA do not require a separate installation option in order to have SNMP functionality. Clarified that the destination directory when moving a domain or post office to Linux must be empty. Change Updated the instructions for migrating a post office to Linux based on the new GroupWise Check functionality June 25, 2004 (GroupWise 6.5 SP2 and GroupWise 6.5 for Linux Change Clarified that a Messenger system is completely independent from a GroupWise system. Updated the instructions for migrating your GroupWise system to Linux servers based on the new DBCopy functionality May 3, 2004 (GroupWise 6.5 for Linux) Change Location “GroupWise System Requirements” on page 19 “System and Domain Names” on page 28 “Linux Server” on page 40 “Setting Up a Basic GroupWise System on Linux” on page 57 “Internet Agent System Requirements” on page 76 “Installing the Internet Agent Software on Linux” on page 84 and “Starting the Internet Agent on Linux” on page 86 “WebAccess System Requirements” on page 96 “Setting Up GroupWise WebAccess on Linux” on page 111 “Monitor System Reguirements” on page 129 “Setting Up GroupWise Monitor on Linux” on page 135 “GroupWise Agent Overview” on page 147 “Agent System Reguirements” on page 148 “Setting Up the GroupWise Agents on Linux” on page 157 “GroupWise Client Workstation Reguirements” on page 169 “Setting Up the GroupWise Cross-Platform Client” on page 173 Update Change Consolidated GroupWise system reguirements, including Linux reguirements Clarified that system and domain names cannot contain asterisks (*) Added a system diagram of a GroupWise system on a Linux server Added instructions for setting up a basic GroupWise system on a Linux server Added Linux to the GroupWise Internet Agent system reguirements Added instructions for setting up the Internet Agent on a Linux server Added Linux to the GroupWise WebAccess system reguirements Added instructions for setting up GroupWise WebAccess on Linux Added Linux to the GroupWise Monitor system reguirements Added instructions for setting up GroupWise Monitor on a Linux server Added an overview of the GroupWise agents Added Linux to the GroupWise agent system requirements Added instructions for setting up the GroupWise agents Added system requirements for the GroupWise Cross-Platform client Added instructions for installing and starting the GroupWise Cross- Platform client Documentation Updates 261 Location Change Chapter 10, “What's Newin Provided a brief overview of GroupWise 6.5 for Linux GroupWise 6.5 for Linux,” on page 179 Chapter 17, “Moving Your Explained how to migrate your GroupWise system to Linux servers Existing GroupWise System to Linux,” on page 231 Appendixes Appendix A, “GroupWise Reworked the GroupWise version compatibility matrix to include the Version Compatibility,” on Linux components provided by GroupWise 6.5 for Linux page 239 Appendix B, “Third-Party Added third-party materials required by some open-source Materials,” on page 247 components included in GroupWise 6.5 for Linux October 31, 2003 Location Change Update “Updating Post Offices” on Clarified that the MTA for the domain must be updated and running page 222 before you update the POA for the post office “Updating Secondary Clarified that the MTA for the domain that the secondary domain links Domains” on page 226 to must be updated and running before you update the secondary domain Chapter 16, “Updating an Described the process for updating from an evaluation system to a Evaluation GroupWise licensed system. System to a Fully Licensed System,” on page 229 “GroupWise System Removed references to Windows 95. Requirements” on page 19 “Starting the GroupWise Removed references to Windows 95. Installation Advisor on Windows” on page 43 “Deciding Where to Install Removed references to Windows 95. the GroupWise Monitor Components” on page 131 “Monitor System Removed references to Windows 95. Requirements” on page 129 “Understanding GroupWise Removed references to Windows 95. Client Updates” on page 207 “Installing and Starting the Removed references to Windows 95. POA’ on page 222 262 GroupWise 6.5 Installation Guide Location “Disk Space Required for the Software” on page 26 Appendixes Appendix A, “GroupWise Version Compatibility,” on page 239 July 16, 2003 (SP1) Location “Starting the GroupWise Installation Advisor on Windows” on page 43 and “Installing the Internet Agent Software on NetWare or Windows” on page 83 and “Setting Up GroupWise WebAccess on NetWare or Windows” on page 105 and “Setting Up GroupWise Monitor on Windows” on page 140 “WebAccess System Reguirements” on page 96 “Monitor System Reguirements” on page 129 Chapter 12, “Understanding the Update Process,” on page 205 Chapter 14, “Updating Your GroupWise 6.x System to Version 6.5,” on page 213 Chapter 15, “Updating Your GroupWise 5.x System to Version 6.5,” on page 227 Change Added information about the setupip folder being on the Client CD. Clarified that GroupWise 5.x is in the end-of-life phase and updates to 5.x versions are no longer being made. Change Each of the following GroupWise installation programs requires the Novell Client™ on the installation machine in order to create objects in Novell eDirectory™: + GroupWise Installation/Setup Advisor (main installation program) * Internet Agent Installation program * WebAccess Installation program + Monitor Installation program Added this reguirement to each installation section. Added information about GroupWise WebAccess support for Apache 2 Web Server and Tomcat 4 on NetWare 6.5. Added information about GroupWise Monitor support for Apache 2 Web Server and Tomcat 4 on NetWare 6.5. The description of the update process emphasizes the need to wait between updating the primary domain and updating a secondary domain, and between updating any domain and updating a post office located on the same machine with the domain. The steps for updating a domain include the need to wait between updating the primary domain and updating a secondary domain, and between updating any domain and updating a post office located on the same machine with the domain. Added information about updating from a GroupWise 5.x system. Documentation Updates 263 264 GroupWise 6.5 Installation Guide